BMW X5 Xdrive 35 I E70

Spare parts and drivetrain components for the BMW X5 Xdrive 35 I E70. Select your make, model and engine to ensure correct fitment before ordering.

Products for BMW X5 Xdrive 35 I E70

28 products
1 - 24 of 28
Item no.:1108259
  • Position: Front left
  • Total length: 637 mm
  • Splines gearbox side: 27
  • Splines wheel side: 30
Item no.:2103342
  • Position: Front right
  • Total length: 1,019 mm
  • Splines gearbox side: 27
  • Splines wheel side: 30
Item no.:6111122
  • Position: Rear left, Rear right
  • Total length: 808 mm
  • Splines gearbox side: 27
  • Splines wheel side: 30
Item no.:6159898
  • Position: Rear left, Rear right
  • Total length: 809 mm
  • Splines gearbox side: 32
  • Splines wheel side: 30
Item no.:0580367
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 30
Item no.:0218376
  • Number of joints: 2
  • Total length: 707 mm
Item no.:0201135
  • Number of centre bearings: 1
  • Number of joints: 2
  • Total length: 1,400 mm
Item no.:6220470
  • Position: Rear
  • Number of centre bearings: 1
  • Number of joints: 2
  • Total length: 1,418 mm
Item no.:0282259
  • Diameter: 24 mm
  • Total length: 62 mm
Item no.:240741
  • Position: Front right, Inner
  • Inner splines: 26
  • Total length: 568 mm
  • Splines gearbox side: 27
  • ABS teeth: 26
Item no.:648835
  • Position: Rear, Inner
  • Total length: 148 mm
  • Splines gearbox side: 27
  • Splines wheel side: 25
  • ABS teeth: 25
Item no.:659695
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 30
Item no.:657015
  • Position: Rear, Outer
  • Seal diameter: 69 mm
  • Inner splines: 28
  • Diameter: 34 mm
  • Outer diameter: 94 mm
Item no.:324265
  • Position: Front
Item no.:0807511
  • Inner diameter: 30 mm
  • Outer diameter: 55 mm
Item no.:213021
  • Position: Front right
  • Total length: 854 mm
  • Splines gearbox side: 22
  • Splines wheel side: 21
Item no.:113823
  • Position: Front left
  • Total length: 662 mm
  • Splines gearbox side: 27
  • Splines wheel side: 30
Item no.:212057
  • Position: Front right
  • Total length: 978 mm
  • Splines gearbox side: 27
  • Splines wheel side: 30
Item no.:0817861
  • Diameter: 30 mm
  • Height: 54 mm
  • Hole spacing c/c: 160 mm
  • Bearing thickness: 36 mm
Item no.:329167
  • Number of joints: 2
  • Total length: 702 mm
Item no.:0663894
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:0573467
  • Position: Outer
  • Inner splines: 33
  • Outer diameter: 86 mm
  • Splines wheel side: 30
Item no.:350063
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 30
  • Joint diameter: 86 mm
Showing 1–24 of 28 products

Drivetrain for BMW X5 Xdrive 35 I E70

The BMW X5 Xdrive 35 I E70 is a powerful SUV that demands a drivetrain in peak condition to handle both daily urban driving and demanding off-road challenges. The drivetrain is central to the vehicle's ability to transfer power effectively, and for this specific model, the xDrive all-wheel-drive system is the core component. This sophisticated transmission continuously distributes torque between the front and rear axles to ensure optimal grip and stability. Maintaining these components is vital for the car's overall service life and performance. At CVJoint24, you will find everything from complete drive shafts to specific joints engineered precisely for the E70 platform. We understand the high technical standards required by BMW, offering only parts that meet or exceed strict original equipment specifications to preserve your vehicle's factory performance and safety characteristics.

How the drivetrain is configured on the BMW X5 Xdrive 35 I E70

The drivetrain layout of the BMW X5 Xdrive 35 I E70 is both intricate and technically advanced to cope with the high output of the 35i engine. The system comprises several interacting assemblies, including the gearbox, transfer case, propeller shafts and drive shafts. Engine power is directed through the gearbox to the transfer box, which then channels torque via a propeller shaft to both the front and rear differentials. From these differentials, power is delivered to the road wheels through four drive shafts. Every component, from the smallest outer CV joint to the longitudinal propeller shaft, plays a critical role in the car's dynamic behaviour. On the E70 platform, perfect balance across these components is essential; even minimal prop shaft runout or play in a CV joint can cause driveline vibrations throughout the chassis, ultimately accelerating wear on expensive bearings, seals and companion flanges.

Common faults and symptoms

There are several telltale signs that the drivetrain on your BMW X5 Xdrive 35 I E70 is worn and requires attention. One of the most common symptoms is a distinct clicking or popping noise on full steering lock at low speeds, typically indicating that an outer CV joint is worn or has suffered lubricant loss. If you experience vibrations through the steering wheel or seat under load or acceleration, this often points to inner CV joint wear or an out-of-balance driveshaft. On xDrive-equipped vehicles, subtle juddering or vibration at motorway cruising speeds frequently traces back to the propeller shaft or a deteriorated centre bearing. Never ignore these early warning signs; complete drive shaft fracture or prop shaft failure can immobilise the vehicle instantly and cause severe consequential damage to the gearbox, transfer box and differentials.

Common parts to replace on the BMW X5 Xdrive 35 I E70

Based on our extensive technical records and catalogue data, certain driveline parts on this BMW model require periodic replacement. We currently stock 10 dedicated product listings for this variant to cover every maintenance requirement. Drive shafts remain among our most requested components, with 4 distinct variations stocked to cover different axle positions. In addition, outer CV joints are critical for both steering articulation and torque transfer, and we supply robust replacement joints engineered to endure the substantial stresses of a heavy luxury SUV. Propeller shafts represent another major category with 5 options available, covering the prop shaft assemblies between the transfer box and differentials. Replacing a complete drive shaft is often more cost-effective and reliable than rebuilding individual joints when wear is advanced. On the BMW X5 E70, inspecting CV boots regularly is equally vital, as a split or perished rubber boot allows road dirt to enter and quickly destroys the constant velocity joint from within.

How to find the correct part for your BMW X5 Xdrive 35 I E70

Navigate directly to the relevant subcategory for your BMW X5 Xdrive 35 I E70:

When diagnosing complex drivetrain issues, starting in the right component section makes all the difference. Comparing the specific categories for the BMW X5 Xdrive 35 I E70 allows you to quickly distinguish between drive shaft, CV joint and propeller shaft requirements and proceed to the exact match for your symptoms.

By selecting your vehicle's make, model and engine variant, you ensure precise compatibility and save valuable workshop time. Our catalogue database is continuously updated with OE specifications to ensure complete peace of mind with every order.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, supported by our central warehouse in Helsingborg, Sweden. We focus specifically on power transmission, providing specialised technical expertise and product depth that general motor factors rarely match. When you order from us, you receive high-quality car parts backed by our dependable fitment guarantee. Your BMW X5 Xdrive 35 I E70 demands components manufactured to tight tolerances to deliver original factory refinement. We aim to help you identify the correct replacement part first time, minimising vehicle downtime. With rapid dispatch across Europe on stocked components, we help get your car back on the road without delay. Trust a dedicated specialist with deep drivetrain knowledge—choose CVJoint24 for proven quality, expertise and fast European delivery.

Frequently Asked Questions about Drivetrain for BMW X5 Xdrive 35 I E70

How do I know if my BMW X5 E70 needs a new drive shaft?

Common signs include vibrations under acceleration or clicking noises when turning. A visual inspection of the CV boots can also reveal grease leaks that lead to premature wear.

Do all drive shafts fit every BMW X5 model?

No, there are significant differences depending on the engine variant, gearbox and model year. Always filter by your specific make, model and engine to find the right part for your Xdrive 35 I E70.

What is the difference between an inner and outer CV joint on my BMW?

The outer CV joint sits closest to the wheel and accommodates steering angles, whilst the inner CV joint sits closest to the gearbox/differential and primarily manages suspension movement.

Why does my BMW X5 vibrate at high speeds?

This can be caused by an imbalanced propeller shaft, a worn centre bearing, or a damaged drive shaft. Inspect the prop shaft mountings and rubber couplings for any signs of cracking.

Is it difficult to replace a drive shaft yourself on a BMW X5 Xdrive 35 I E70?

It requires specialist tools and sound technical knowledge, as the suspension design is complex. We recommend having good mechanical experience before undertaking the replacement.

Are CV boots included when I buy a complete drive shaft from you?

Yes, our complete drive shafts are always supplied fully assembled with premium-quality CV boots, clips and the correct amount of grease for a straightforward, reliable installation.