BMW X7

Spare parts and drivetrain components for the BMW X7.

Choose version

Choose a version to refine the results and get closer to the right product.

Products for BMW X7

45 products
1 - 24 of 45
Item no.:2117852
  • Position: Front right
  • Total length: 912 mm
  • Splines gearbox side: 27
  • Splines wheel side: 37
Item no.:0550729
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:1176019
  • Position: Front left
  • Total length: 612 mm
  • Splines gearbox side: 27
  • Splines wheel side: 37
Item no.:410238
  • Position: Rear left
  • Total length: 733 mm
  • Splines gearbox side: 32
  • Splines wheel side: 37
Item no.:326566
  • Position: Front
  • Total length: 809 mm
Item no.:514518
  • Position: Rear right
  • Total length: 788 mm
  • Splines gearbox side: 32
  • Splines wheel side: 37
Item no.:514178
  • Total length: 794 mm
  • Splines gearbox side: 32
  • Splines wheel side: 37
  • ABS teeth: 0
Item no.:419535
  • Total length: 735 mm
  • Splines gearbox side: 32
  • Splines wheel side: 37
  • ABS teeth: 0
Item no.:2117993
  • Position: Front right
  • Total length: 912 mm
  • Splines gearbox side: 27
  • Splines wheel side: 37
Item no.:0546280
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:1172599
  • Position: Front left
  • Total length: 612 mm
  • Splines gearbox side: 27
  • Splines wheel side: 37
Item no.:412946
  • Position: Rear left
  • Total length: 733 mm
  • Splines gearbox side: 32
  • Splines wheel side: 37
Item no.:325991
  • Position: Front
  • Total length: 809 mm
Item no.:518843
  • Position: Rear right
  • Total length: 788 mm
  • Splines gearbox side: 32
  • Splines wheel side: 37
Item no.:2141049
  • Position: Front right
  • Total length: 912 mm
  • Splines gearbox side: 27
  • Splines wheel side: 37
Item no.:0584280
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:1186869
  • Position: Front left
  • Total length: 612 mm
  • Splines gearbox side: 27
  • Splines wheel side: 37
Item no.:410133
  • Position: Rear left
  • Total length: 733 mm
  • Splines gearbox side: 32
  • Splines wheel side: 37
Item no.:325747
  • Position: Front
  • Total length: 809 mm
Item no.:2142773
  • Position: Front right
  • Total length: 912 mm
  • Splines gearbox side: 27
  • Splines wheel side: 37
Item no.:0504869
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:1155253
  • Position: Front left
  • Total length: 612 mm
  • Splines gearbox side: 27
  • Splines wheel side: 37
Item no.:417688
  • Position: Rear left
  • Total length: 733 mm
  • Splines gearbox side: 32
  • Splines wheel side: 37
Item no.:328049
  • Position: Front
  • Total length: 809 mm
Showing 1–24 of 45 products

Drivetrain for BMW X7

The BMW X7 represents the pinnacle of luxury and performance in the BMW SUV segment, which means that every component in its drivetrain is engineered to handle substantial torque and heavy loads. The drivetrain is the system that transfers engine power to the wheels, and in a vehicle of this size, the stresses are immense. Maintaining the drivetrain with the correct spare parts is vital to avoid costly consequential damage to the gearbox or differentials. At CVJoint24, we understand the technical demands of the BMW X7 and offer only parts that meet the strict specifications required for this premium model.

Our range covers the most critical points in power transmission. Whether you need a complete drive shaft or a specific outer CV joint, you can trust that our products are selected for their durability and exact fitment. By choosing the right parts from a specialist, you ensure that your BMW X7 continues to deliver the smooth, stable ride expected of a car in this class.

How the BMW X7 drivetrain is constructed

The drivetrain on a BMW X7 is a complex system centred primarily around the BMW intelligent all-wheel-drive system, xDrive. The system consists of several interacting components, including a transfer case, front and rear differentials, and drive shafts that direct power out to each individual wheel. Because the X7 is a large, heavy car with powerful engine options, the drive shafts are dimensioned to withstand high loads under both acceleration and cornering. Each component is precision-balanced to minimise vibrations and maximise cabin comfort.

The outer CV joints play a central role, allowing the wheels to steer while transmitting power from the drive shaft. On a BMW X7, these joints are frequently exposed to road dirt and salt, making the condition of the CV boots crucial to the life of the CV joint. A properly functioning drivetrain is essential for the xDrive system to distribute power optimally between the front and rear axles, which is key to the car's handling characteristics.

Common faults and symptoms

Despite the high build quality of the BMW X7, drivetrain components can wear out over time. One of the most common signs of a failing outer CV joint is a clicking or knocking noise clearly audible on full steering lock at low speeds. If the noise disappears when driving straight ahead, this is a strong indicator that the outer joint needs replacing. Vibrations in the steering wheel or car chassis under acceleration can instead point to imbalance or wear in the drive shaft itself or its inner joints.

Another critical symptom is oil or grease leaking around the wheel arches. This is often caused by a split CV boot. If the boot tears, the protective grease escapes whilst dirt gets in, quickly destroying the constant velocity joint. By paying attention to these early warning signs, you can rectify the problem before it leads to a complete breakdown on the road—especially important on a heavy car like the BMW X7 where driveline loads are substantial.

Common parts to replace on the BMW X7

For the BMW X7, drive shafts and outer CV joints are the parts most frequently replaced as the kilometres add up or if the vehicle is driven in harsh conditions. We have organised our selection to make it easy for you to find the right category for your car. Below you will find the most relevant categories for your model:

  • Drive shafts for BMW X7 – We currently stock 6 matching products to replace worn or damaged shafts.
  • Outer CV joints for BMW X7 – We offer 6 high-quality options to resolve knocking noises when cornering.

Replacing a complete drive shaft is often an efficient solution if multiple joints on the shaft show signs of wear, whereas replacing solely the outer CV joint may suffice if the fault is isolated there. Whichever part you choose, it is important to ensure all fitting hardware and new boots are included to guarantee a secure, long-lasting installation.

How to find the right part for your BMW X7

Select the relevant section for your BMW X7:

On a model with multiple possible drivetrain issues, it is wise to start in the right category directly. By comparing the exact component sections for the BMW X7, it becomes easier to distinguish between faults in the drive shaft, CV joint or propeller shaft and to continue to the page that best matches your symptoms and fitment requirements.

Finding the correct spare part for such a technically advanced vehicle as the BMW X7 requires precision. Variations often depend on the engine variant, model year, and whether the car is fitted with optional equipment that affects the suspension and chassis. The most reliable way to ensure fitment is to select your car's make, model and engine from our catalogue, filtering out the parts that are technically verified for your specific BMW X7.

Once you have your results, it is still advisable to check technical specifications such as the number of teeth on the ABS ring or the overall length of the driveshaft, where available. Should you feel uncertain about which drive shaft fits your BMW X7, our customer support team is on hand with expert advice. Our priority is getting you the right part the first time, keeping garage downtime to a minimum.

Why buy from CVJoint24

CVJoint24 is not just another car parts retailer; we are the international shop of a Swedish driveline specialist with our central warehouse in Helsingborg, Sweden, dedicated entirely to drivetrain and power transmission components. Our strength lies in our deep category expertise and our ability to supply the exact right parts for demanding vehicles like the BMW X7. We understand the importance of precise fitment and premium material quality, which is why we are the trusted choice for both DIY mechanics and professional garages seeking reliable components.

When you shop with us, you benefit from specialist knowledge that general motor factors rarely match. We combine a broad stockholding with fast deliveries across the EU and knowledgeable customer service from experts who truly understand the products. By focusing on specialist areas such as outer CV joints for the BMW X7, we can guarantee highly relevant search results and a reliable shopping experience. Choose a specialist for your BMW X7 – choose CVJoint24.

Frequently Asked Questions about Drivetrain for BMW X7 – Spare Parts for Optimal Power Transmission

How do I know if a drive shaft fits my BMW X7?

The easiest and most reliable method is to select your BMW X7 make, model and engine variant in our store. This filters the range so you only see the drive shafts designed specifically for your vehicle.

What are the most common symptoms of a worn CV joint on a BMW X7?

The most common symptoms include a clicking noise when cornering sharply, vibrations under acceleration, or visible grease leaking from a damaged CV boot inside the wheel arch.

Do you stock both complete drive shafts and individual CV joints for BMW X7?

Yes, we stock both complete drive shafts and separate outer CV joints for BMW X7, allowing you to choose the most cost-effective option for your repair.

Why is it important to replace a split CV boot promptly?

A split CV boot allows essential lubricating grease to escape while letting in dirt and water. This quickly destroys the constant velocity joint, leading to a much more costly replacement of the complete joint or drive shaft.

Is the drivetrain on the BMW X7 different from smaller BMW models?

Yes, the BMW X7 is a heavier vehicle that produces higher torque, meaning its drivetrain components are built to heavier-duty dimensions to handle the extra stress compared to smaller models.

Can I replace the drive shaft on my BMW X7 myself?

It is possible for an experienced DIY mechanic with the appropriate tools. However, because the BMW X7 features complex suspension geometry and heavy components, careful attention to detail and access to the correct workshop procedures are strongly advised.