BMW X7 Xdrive 40 I G07

Drivetrain components and spare parts for the BMW X7 Xdrive 40 I G07. Select your vehicle make, model and engine to guarantee an exact fit.

Products for BMW X7 Xdrive 40 I G07

7 products
1 - 7 of 7
Item no.:2196597
  • Position: Front right
  • Total length: 912 mm
  • Splines gearbox side: 27
  • Splines wheel side: 37
Item no.:0572771
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 74,5 mm
Item no.:1148699
  • Position: Front left
  • Total length: 612 mm
  • Splines gearbox side: 27
  • Splines wheel side: 37
Item no.:413808
  • Position: Rear left
  • Total length: 733 mm
  • Splines gearbox side: 32
  • Splines wheel side: 37
Item no.:326566
  • Position: Front
  • Total length: 809 mm
Item no.:514518
  • Position: Rear right
  • Total length: 788 mm
  • Splines gearbox side: 32
  • Splines wheel side: 37
Item no.:356427
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 37
  • Joint diameter: 86 mm

Drivetrain for BMW X7 Xdrive 40 I G07

The BMW X7 Xdrive 40 I G07 represents the pinnacle of German engineering in the SUV segment, where commanding performance meets sophisticated comfort. Maintaining these characteristics demands a drivetrain in prime mechanical condition. The drivetrain in a BMW X7 is an intricate system responsible for transferring power from the six-cylinder engine to all four wheels smoothly and efficiently. Because the G07 platform is built for heavy loads as well as dynamic driving, its components endure substantial strain under hard acceleration and cornering. Choosing the right spare parts is therefore vital for the vehicle's longevity and road safety. With us, you will find parts engineered specifically to meet the high standards demanded of a modern BMW. We focus on providing parts that not only match the original physical dimensions, but also perform to the standard of original equipment, ensuring your driving experience stays intact year after year.

How the drivetrain is engineered on the BMW X7 Xdrive 40 I G07

The drivetrain layout on the BMW X7 Xdrive 40 I G07 centres on the intelligent xDrive all-wheel-drive system. This setup distributes engine torque between the front and rear axles according to road conditions and driving style. Power travels from the gearbox via a transfer case to the front and rear differentials. From these differentials, power is routed to the wheels through sturdy drive shafts. Every BMW X7 is fitted with precision-manufactured components designed to minimise vibration and driveline losses. On the xDrive 40 I G07 model, the dimensioning of each driveshaft is particularly crucial, as it must reliably manage the instantaneous power delivery of the turbocharged engine. The system also incorporates advanced CV joints that accommodate significant angular changes during steering and suspension travel, which is essential for a vehicle of the X7's weight and proportions. Understanding this arrangement is key to appreciating why the quality of every single link in the chain matters to the whole system.

Common faults and symptoms

Despite BMW's robust design and build quality, wear and tear will inevitably occur over time. One of the most typical signs of a deteriorating outer CV joint is a rhythmic clicking noise heard distinctly when turning sharply at low speeds. If you notice vibrations through the steering wheel or chassis during acceleration, this often points to wear or imbalance in an inner CV joint or the drive shaft itself. Another critical issue is a leaking CV boot. When the boot splits, its lubricating grease escapes while road grit and water penetrate the joint, quickly leading to complete joint failure. For BMW X7 Xdrive 40 I G07 owners, addressing these symptoms promptly prevents expensive consequential damage to other transmission and driveline components. Regular inspection of your drivetrain components saves significant expense down the line and ensures your vehicle remains dependable on the road.

Common replacement parts for the BMW X7 Xdrive 40 I G07

When it comes to maintaining the driveline of this particular model, attention focuses primarily on drive shafts and CV joints. For the BMW X7 Xdrive 40 I G07, we supply components tailored precisely to the vehicle's unique specifications. Our catalogue currently covers the following categories dedicated to your car:

  • Drive shaft BMW X7 Xdrive 40 I G07 (2 variants available)
  • Outer CV joint BMW X7 Xdrive 40 I G07 (1 variant available)
These parts are vital for preserving the vehicle's xDrive stability and handling balance. A new drive shaft restores seamless power delivery and eliminates the intrusive vibrations caused by a worn assembly. The outer constant velocity joint is equally crucial, enabling the front wheels to transmit power and steer simultaneously without binding or noise. By choosing the right replacement parts from our range, you can be sure your BMW maintains the refined driving feel expected of a G07.

How to find the right part for your BMW X7 Xdrive 40 I G07

Select the correct section for your BMW X7 Xdrive 40 I G07 below:

When addressing driveline issues, selecting the right category from the start makes diagnosis and repair straightforward. Comparing the relevant component categories for the BMW X7 Xdrive 40 I G07 helps you isolate whether an issue lies with a drive shaft, CV joint or propeller shaft, directing you straight to the correct product range.

Navigating car parts for a technologically complex vehicle like the BMW X7 can feel challenging, but we have made selection effortless and reliable. The most dependable method to find compatible components is selecting your car's make, model and engine variant in our store selector. This ensures that the parts displayed are fully compatible with your BMW X7 Xdrive 40 I G07, eliminating guesswork around chassis designations or exact production dates. Once you have identified the right parts, you can rely on our fitment guarantee to ensure they install correctly. If you need any assistance, our technical specialists are always on hand to advise. Always confirm whether you require a nearside (left) or offside (right) part, as well as whether symptoms stem from the inner or outer joint, so that your order is spot on from the start.

Why buy from CVJoint24?

As Swedish driveline specialists shipping directly across Europe, we bring you an unmatched combination of dedicated expertise and parts availability. We understand that driveline faults demand swift solutions, which is why our Helsingborg warehouse processes and dispatches orders quickly to keep vehicle downtime to a minimum. Our focus is devoted entirely to drivetrains and power transmission, giving us in-depth technical knowledge that general auto factors cannot match. When you order from CVJoint24, you receive top-quality spare parts selected specifically for their durability and exact fit. Our fitment guarantee backs every order, giving you total peace of mind. With our comprehensive BMW range and knowledgeable support team, we are the natural choice when maintaining your BMW X7 Xdrive 40 I G07 to the highest standard.

Frequently Asked Questions about Drivetrain Parts for BMW X7 xDrive 40 i G07

How do I know if my BMW X7 needs a new drive shaft?

The most common signs are vibrations during acceleration or a clicking noise when cornering. If you notice grease on the inside of the wheel rim, this can indicate a split CV boot, which often means the drive shaft must be replaced if not resolved quickly.

Do all CV joints fit the xDrive 40 i G07?

No, CV joints are specific to the car model, engine variant and sometimes the model year. Always select your BMW X7 make, model and engine in our vehicle selector to ensure a guaranteed fit for your car.

What is the difference between the inner and outer CV joint on my BMW?

The outer CV joint sits closest to the wheel and accommodates steering angles, whilst the inner joint sits closest to the gearbox or differential and primarily handles up-and-down suspension movement. The symptoms of wear often differ between the two.

Can I replace just the CV boot on my BMW X7?

Yes, if you catch a damaged boot early before dirt and grit have entered the joint, replacing just the CV boot and repacking it with fresh grease may suffice. However, if the joint has already started making clicking noises, replacing the complete unit is the safest option.

How does xDrive affect wear on drivetrain components?

Because xDrive distributes power to all four wheels, both the front and rear drive shafts are subjected to load. This distributes wear across all axles, but it also means every component must be in sound condition for the system to work optimally.

Why is it important to use the correct grease in the CV joint?

CV joint grease is specially formulated to withstand extreme pressure and high temperatures. Using the wrong grease can lead to increased friction and rapid wear, which in the worst-case scenario will cause premature failure in your BMW's drivetrain.