Citroen XM Break

Spare parts and drivetrain components for Citroen XM Break.

Products for Citroen XM Break

48 products
25 - 48 of 48
Item no.:2110402
  • Position: Front right
  • Splines gearbox side: 41
  • Splines wheel side: 28
  • Total length: 958 mm
  • ABS teeth: 29
Item no.:115276
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 652 mm
  • ABS teeth: 29
Item no.:211590
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 939 mm
  • ABS teeth: 29
Item no.:117785
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 653 mm
  • ABS teeth: 29
Item no.:2109782
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 954 mm
  • Joint diameter: 100 mm
Item no.:111729
  • Position: Front left
  • Splines gearbox side: 41
  • Splines wheel side: 28
  • Total length: 645 mm
  • ABS teeth: 48
Item no.:210848
  • Position: Front right
  • Splines gearbox side: 41
  • Splines wheel side: 28
  • Total length: 956 mm
  • ABS teeth: 48
Item no.:1144918
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 648 mm
  • ABS teeth: 29
Item no.:1106516
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 650 mm
  • Joint diameter: 100 mm
Item no.:2126948
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 954 mm
  • Joint diameter: 100 mm
Item no.:1154701
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 650 mm
  • ABS teeth: 48
Item no.:2132900
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 954 mm
  • ABS teeth: 48
Item no.:2114356
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 917 mm
  • ABS teeth: 48
Item no.:113937
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 624 mm
  • ABS teeth: 48
Item no.:1168700
  • Position: Front left
  • Splines gearbox side: 41
  • Splines wheel side: 28
  • Total length: 643 mm
  • ABS teeth: 48
Item no.:2154843
  • Position: Front right
  • Splines gearbox side: 41
  • Splines wheel side: 28
  • Total length: 958 mm
  • ABS teeth: 48
Item no.:339840
  • Position: Front
  • ABS teeth: 29
  • Inner diameter: 90 mm
  • Outer diameter: 100 mm
  • Width: 10 mm
Item no.:1182867
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 652 mm
  • ABS teeth: 48
Item no.:2126427
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 937 mm
  • ABS teeth: 48
Item no.:2167404
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 937 mm
  • ABS teeth: 29
Item no.:1175496
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 624 mm
  • ABS teeth: 48
Item no.:2119738
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 917 mm
  • ABS teeth: 48
Item no.:0629572
  • Position: Front
Item no.:0616621
  • Total length: 103 mm
  • Inner diameter: 24 mm
Showing 25–48 of 48 products

Drivetrain for Citroen XM Break

The Citroen XM Break is an iconic vehicle known for its sophisticated technology and outstanding comfort, especially in its spacious estate guise. To preserve these unique driving dynamics, the drivetrain must remain in first-class condition. The transmission of power is at the very core of your car’s movement, and on a heavy, load-carrying estate like the XM Break, components endure significant strain on the road, particularly during acceleration and cornering. At CVJoint24, we understand the distinct technical demands of this model and provide a range carefully selected to match or exceed original specifications.

By maintaining your drivetrain, you ensure not only a smoother ride but also a safer driving experience. A properly functioning driveline reduces unnecessary wear on surrounding vehicle parts, including the suspension and gearbox. As drivetrain specialists, we ensure you have access to parts engineered to handle the torque and loads produced by Citroen engines, which is vital for long-term durability and performance.

How the drivetrain works on the Citroen XM Break

The drivetrain on a Citroen XM Break is a sophisticated assembly engineered to manage power delivery alongside the vehicle's unique hydropneumatic suspension system. Being front-wheel drive, the setup primarily comprises a transverse engine and gearbox transmitting power via two drive shafts to the front wheels. Each drive shaft features both inner and outer CV joints to allow for substantial suspension travel and full steering movement on the move. This degree of flexibility is essential for the car to maintain its hallmark ride comfort on all road surfaces.

The outer CV joint is a Rzeppa-type joint that accommodates wide steering angles, whilst the inner joint is typically a tripod joint that absorbs the axial movement generated as the suspension adjusts the car’s ride height. On the Citroen XM Break, this interplay is particularly critical because variable ride heights mean the drive shafts work through a wider range of angles than in cars with conventional suspension. Using precision-engineered components is therefore vital to avoid vibrations and premature wear in these moving parts.

Common faults and symptoms

Several distinct signs indicate that drivetrain components on your Citroen XM Break are wearing out and require attention. One of the most typical symptoms is a rhythmic clicking or knocking noise when cornering on full lock at low speeds. This almost invariably points to a worn outer CV joint for Citroen XM Break, where the internal steel balls are knocking against worn tracks inside the housing. If left unaddressed, this wear can lead to total joint failure, causing complete loss of drive.

If you experience vibrations through the steering wheel or body shell, particularly under acceleration at higher speeds, this often indicates wear in the inner constant velocity joints or an unbalanced drive shaft. Furthermore, ABS fault lights or a pulsing brake pedal under light braking are frequently caused by a cracked or corroded ABS ring. As the XM Break is an older classic, rust often builds up beneath the reluctor ring, forcing it to expand and ultimately snap, which disrupts the speed sensor’s signal to the safety system.

Common parts to replace on the Citroen XM Break

For the Citroen XM Break, certain components naturally show a recurring need for replacement due to age and high mileage. In our product range, we focus on stocking the parts that are most crucial for restoring the vehicle's safety and road manners. We currently carry a targeted selection covering the key transmission requirements for this model. These are the most relevant categories for your vehicle:

  • Drive shafts for Citroen XM Break – we supply multiple variants tailored to different engine options.
  • Outer CV joints for Citroen XM Break – 2 high-quality options for smooth, reliable steering.
  • ABS rings for Citroen XM Break – 1 specific model for accurate sensor readings.

Replacing a complete drive shaft is frequently a more time-efficient and durable solution than attempting to overhaul individual joints, particularly on higher-mileage vehicles. Fitting a brand-new driveshaft assembly ensures that both the inner and outer joints as well as the shaft itself are in pristine condition, reducing the risk of repeat issues and saving garage labour costs over time.

Finding the right part for your Citroen XM Break

Navigate directly to the right category for your Citroen XM Break:

On a vehicle with several potential driveline issues, it pays to start in the correct subcategory right away. Comparing specific sections for the Citroen XM Break makes it straightforward to pinpoint whether you need a drive shaft, a CV joint or a propeller shaft component, and to proceed to the page that matches your car's symptoms and fitment.

Identifying the exact component for your Citroen XM Break can be complex, as dimensions and spline counts vary between engine versions, gearbox types and production years. The quickest and most reliable method to ensure a precise fit is to filter by your car’s make, model and engine variant on cvjoint24.com. This narrows your search directly to the spare parts verified for your car, removing any guesswork.

It is always sensible to verify a few key technical details before ordering. Check whether your car is equipped with a manual or an automatic gearbox, as driveshaft lengths and splines often differ between transmissions. For ABS reluctor rings, confirm the tooth count, as braking systems can differ across trims. If you have any questions, our technical team is on hand to help you match your vehicle data so your Citroen XM Break gets the exact parts it needs to return smoothly to the road.

Why shop with cvjoint24.com

CVJoint24 is the international shop of a Swedish driveline specialist, supplying high-quality transmission parts across Europe. We pair in-depth technical expertise with a specialised inventory to give you the ideal foundation for a successful repair. By ordering from us, you receive precision-manufactured car parts with proven durability, which is essential for a technically complex car like the Citroen XM Break. We understand the necessity of exact fitment and robust materials to keep that classic Citroen ride intact.

Our dedication to drivetrain components means we do not merely supply replacement parts; we provide solutions grounded in a true understanding of chassis engineering. With accurate model filtering, thorough category depth and fast dispatches from our central warehouse in Helsingborg, Sweden, we are the trusted partner for enthusiasts and workshops alike. Whether you require a single ABS ring or a complete drive shaft, we have your Citroen covered.

Frequently Asked Questions about Drivetrain Parts for Citroen XM Break

How do I know if a CV joint has failed on my Citroen XM Break?

The most common sign is a clicking noise when making sharp turns. If the noise occurs when accelerating in a straight line, it may instead be the inner CV joint or the drive shaft itself that is worn.

How do I find the correct parts for my XM Break?

Simply select your Citroen XM Break by make, model, and engine variant in our vehicle selector. This is the most reliable way to find the exact drive shaft, CV joint, and ABS ring to fit your car.

Why is the ABS warning light on in my Citroen XM?

A very common cause is a cracked ABS ring due to rust and corrosion. This sends false signals to the wheel speed sensor, triggering an error warning in the system.

Is there a difference between drive shafts for manual and automatic gearboxes?

Yes, there are often differences in both overall length and spline count between manual and automatic gearboxes on the Citroen XM Break. Always check the specifications carefully.

Do I need to replace the entire drive shaft if only the CV boot is damaged?

No, if you catch a split boot early and the joint is still clean and lubricated, replacing just the CV boot is sufficient. However, if dirt has entered and the joint is making noise, it must be replaced.

How many ABS rings are fitted to a Citroen XM Break?

There is an ABS ring at each wheel. The front ones are mounted on the outer CV joints and are the ones most frequently in need of replacement due to wear and corrosion.