CV boots for Mitsubishi Eclipse

Looking for a model-specific CV boot for your Mitsubishi Eclipse? At CVJoint24, your Swedish driveline specialist, you will find the right components to safeguard your car's CV joints. A...

Products for CV boots for Mitsubishi Eclipse

2 products
1 - 2 of 2
Item no.:0630236
  • Position: Front
  • Diameter: 77 mm
  • Total length: 84 mm
  • Outer diameter: 23 mm
Item no.:0613157
  • Position: Front
  • Diameter: 77 mm
  • Total length: 84 mm
  • Outer diameter: 23 mm

CV boots for Mitsubishi Eclipse

Owning a Mitsubishi Eclipse often goes hand in hand with an enthusiasm for driving enjoyment and performance. To preserve your car's reliability, it is vital to keep an eye on the smallest yet perhaps most crucial protective components of the drivetrain: the CV boots. A CV boot for the Mitsubishi Eclipse is designed to seal in the lubricating grease around the CV joint whilst acting as a barrier against road grit, salt and moisture. Because Eclipse models are often driven in diverse conditions, the rubber is subjected to substantial strain from temperature fluctuations and mechanical movement. With us, you will find carefully selected CV joint boots that match the exact technical specifications of your car. By replacing a split CV boot in good time, you can save hundreds of pounds by preventing complete constant velocity joint failure. We focus on providing parts that stand up to daily commuting as well as more spirited driving on twisty B-roads.

What does a CV boot do on a Mitsubishi Eclipse?

The primary role of the boot on your car is twofold. Firstly, it serves as a reservoir for the specialised grease required for a CV joint to operate smoothly across wide operating angles, such as at full steering lock. Secondly, it shields the joint from outside contaminants. If the boot tears, grease is flung out by centrifugal force, leaving bare metal components unprotected. Without proper lubrication, intense heat and friction build up rapidly, causing premature joint failure. On a sporty car like the Eclipse, the drivetrain is under continuous load, meaning the drive shaft boot must remain sufficiently flexible to accommodate suspension travel without cracking. It is a critical transmission component that is all too often overlooked until it is too late and costly damage has already occurred.

Common signs of wear and tear

The most telling sign that a CV boot on your Mitsubishi Eclipse has split is the presence of thick, dark grease flung over the inside of the wheel rim or wheel arch. As the rubber ages, it perishes and develops hairline cracks, most commonly within the bellows folds. If you catch these cracks early, simply renewing the boot itself and packing it with fresh grease is usually enough. However, if you hear a clicking sound when cornering or notice vibrations under acceleration, grit may already have entered and damaged your driveshaft or its joints. Regular visual checks during tyre changes or routine servicing are the best way to prevent trouble. A quick inspection takes mere seconds, yet it can mean the difference between replacing a simple boot and carrying out a much more extensive, costly CV joint replacement.

How to choose the correct CV boot

Selecting the right CV boot for your Mitsubishi Eclipse can seem daunting, as specifications vary depending on model year and engine type. Two main options exist: tailor-made model-specific boots and universal stretch boots. We always recommend selecting your car by make, model and engine to find the exact part tailored to your vehicle's precise dimensions. A boot that is too large will fail to seal properly, while one that is too small risks being stretched and torn at full lock. Always check whether you need an inner or outer CV boot, as their shape and mounting diameters differ. Our products are usually supplied as complete kits with fitting hardware, including stainless-steel clamps and the correct measure of grease, making installation smoother and more dependable. With the right part, you ensure your Eclipse stays in prime condition kilometre after kilometre.

Related parts to inspect

You may also wish to check these exact pages for the same vehicle when working on CV boots:

When one drivetrain component shows signs of wear, nearby parts on the vehicle often require attention too. By comparing these exact pages for the Mitsubishi Eclipse, it is easier to confirm whether an issue lies purely with the CV boots or in an adjacent part of the transmission.

This is particularly relevant for models where vibration, play and unwanted noise can blur symptoms across several driveline components. Checking related categories reduces the risk of replacing the right type of part whilst overlooking a neighbouring component that contributes to the very same problem.

While you are working on the CV boots of your Mitsubishi Eclipse, inspecting the rest of the drivetrain makes good sense. Often, boot deterioration indicates that neighbouring components may also be approaching the end of their service life. Inspect the condition of your constant velocity joints and check for excess play along the drive shafts. Here are the main categories to check on your vehicle:

  • Mitsubishi Eclipse
  • Outer CV joints for Mitsubishi Eclipse
  • Inner CV joints for Mitsubishi Eclipse
  • Drive shafts for Mitsubishi Eclipse
  • ABS rings for Mitsubishi Eclipse
By taking a proactive approach and replacing worn parts together, you save both time and workshop costs in the long run. Ensuring your whole drivetrain is in sound order delivers a safer, more reassuring drive.

Why buy from CVJoint24?

As a dedicated Swedish driveline specialist, CVJoint24 offers in-depth expertise that general car parts retailers rarely match. We understand the engineering details of the Mitsubishi Eclipse drivetrain and maintain extensive stock in our central warehouse in Helsingborg, Sweden, shipping right across the EU. When you buy from us, you benefit from our accurate fitment guarantee, ensuring peace of mind when selecting your vehicle by make, model and engine. We aim to help you get the right part first time, avoiding tedious returns. With prompt dispatch and reliable delivery, we keep your car's time on axle stands to a minimum. Our commitment to quality and precision makes us the trusted choice for DIY enthusiasts and trade mechanics alike. The right part with specialist knowledge every time – that is our commitment to you as an Eclipse owner looking for top-tier car parts.

Frequently asked questions about CV boots for Mitsubishi Eclipse

How do I know which CV boot fits my Mitsubishi Eclipse?

The easiest way is to select your vehicle's make, model, and engine variant in our search filter. This ensures you find the exact CV boots tailored to your car's drivetrain with guaranteed fitment.

Can I replace the CV boot on my Eclipse myself?

Yes, it is entirely possible for a competent DIY mechanic, but it requires specific tools and removing the drive shaft or CV joint to slide the new boot into place.

What happens if I drive with a split CV boot?

If the boot is split or torn, the grease leaks out and dirt gets in. This quickly wears out the CV joint and causes it to become noisy, ultimately leading to a more expensive replacement of the entire joint.

Are grease and clamps included when I buy a CV boot?

Yes, our CV boot kits for Mitsubishi Eclipse are normally supplied complete with specialist grease and the necessary retaining clamps for a secure installation.

Is there a difference between the inner and outer CV boot?

Yes, the outer CV boot sits by the wheel hub and accommodates greater movement and steering angles, while the inner boot sits by the gearbox. They often differ in both shape and size.

How often should I inspect the CV boots on my Mitsubishi?

We recommend inspecting the CV boots at every routine service or whenever you change tyres, allowing you to catch any cracks or splits early.