Dodge Challenger

Welcome to your specialist in drivetrain parts for the Dodge Challenger. As Swedish driveline specialists supplying customers across Europe, we understand the demands of a high-torque...

Products for Dodge Challenger

12 products
1 - 12 of 12
Item no.:653227
  • Position: Rear, Outer
  • Inner splines: 26
  • Splines wheel side: 27
  • Seal diameter: 61,5 mm
  • ABS teeth: 48
Item no.:627778
  • Position: Rear
Item no.:0828649
  • Inner diameter: 30 mm
  • Bearing thickness: 13 mm
Item no.:626703
  • Position: Rear
  • Total length: 1,757 mm
Item no.:0808746
  • Inner diameter: 30 mm
  • Bearing thickness: 15 mm
  • Hole spacing c/c: 187 mm
Item no.:418325
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 798 mm
  • ABS teeth: 48
Item no.:517314
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 810 mm
  • ABS teeth: 48
Item no.:617768
  • Position: Rear
  • Splines gearbox side: 37
  • Splines wheel side: 35
  • Total length: 815 mm
  • ABS teeth: 96
Item no.:627097
  • Position: Rear
  • Total length: 1,502 mm
Item no.:622709
  • Position: Rear
  • Total length: 1,747 mm
Item no.:321429
  • Total length: 659 mm
  • Number of joints: 2
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 76 mm
  • Outer diameter 2: 57 mm
Item no.:628793
  • Total length: 1,880 mm
  • Outer diameter 1: 16 mm
  • Bolt circle diameter 1: 100 mm
  • Outer diameter 2: 16 mm
  • Bolt circle diameter 2: 100 mm

Drivetrain for Dodge Challenger

The Dodge Challenger is a true icon of American muscle and performance, commanding respect on the open road as well as in the workshop. Handling its high-output engine and massive torque demands a drivetrain in peak mechanical condition. Every part, from the gearbox through to the wheel hubs, plays a critical role in handling, acceleration and overall safety. At CVJoint24 you will find a dedicated range of components selected specifically to meet the high demands of Challenger drivers. We focus on engineering quality and precision fit to ensure your car retains its distinctive character and raw performance mile after mile. Maintaining the drivetrain is not merely a repair; it is a long-term investment in vehicle longevity and driving pleasure. Choosing the correct components from a driveline specialist reduces the risk of expensive collateral damage to other vital transmission parts, saving both time and money over time.

How the drivetrain is configured on the Dodge Challenger

The Dodge Challenger relies on a proven rear-wheel-drive architecture engineered for stability and efficient power delivery. Central to this setup is a robust propeller shaft transferring torque from the gearbox to the rear differential. All-wheel-drive versions add further complexity, using a transfer box and front drive shafts to deliver power forward. At the rear, independent drive shafts allow each wheel to move freely over road undulations whilst channeling immense torque under hard acceleration. This layout demands that every link in the driveline—joints, bearings and shafts—is precisely sized to cope with high mechanical loads. Understanding how these components interact is key to identifying potential issues early, well before they turn into costly mechanical failures.

Common faults and symptoms

Symptoms of a failing drivetrain vary, but are generally noticeable to an observant driver. One classic sign of a worn outer CV joint on a Dodge Challenger is a rhythmic clicking or snapping noise when negotiating tight turns, especially at low speeds. Diffuse vibrations felt through the cabin or floorpan during acceleration often point to wear in the inner constant velocity joints or an out-of-balance prop shaft. A whining, rumbling or droning noise from beneath the car typically stems from a worn centre bearing that can no longer support and steady the propeller shaft properly. Addressing these symptoms promptly is vital, as driveline imbalance can quickly cause secondary damage to both the gearbox and the differential. Regular inspection of every CV boot is also essential to prevent grit and moisture from entering the joints and washing out the grease, which is a frequent cause of premature failure.

Common parts to replace on the Dodge Challenger

In our comprehensive Dodge Challenger catalogue, we have highlighted the most critical components requiring attention to sustain peak performance. We currently stock key drivetrain items tailored to the car's power delivery requirements. These include six different propeller shafts precision-balanced to eliminate driveline vibrations, alongside three driveshaft variants suited to various engine configurations. We also supply specialised centre bearings and outer CV joints engineered to withstand the severe stresses of spirited driving. Every spare part is selected for durability and its capacity to handle the high torque output of the Challenger platform. Whether for daily driving or hard use on the track, our parts deliver the strength and reliability needed to keep your vehicle performing at its best.

Finding the right part for your Dodge Challenger

Navigate directly to the appropriate section for your Dodge Challenger:

When diagnosing driveline faults, selecting the correct component category straight away makes all the difference. Comparing the specific sub-categories for the Dodge Challenger helps you distinguish between drive shaft, CV joint and propeller shaft issues, leading you to the right fit for your symptoms.

Locating the correct replacement part for an American muscle car like the Dodge Challenger can seem daunting given the range of model years and engine options. The most reliable approach is to filter by your car's make, model and engine variant in our store selector to display parts verified for your specific build. You can also jump straight to your chosen category here:

  • Drive shafts for Dodge Challenger
  • Outer CV joints for Dodge Challenger
  • Propeller shafts for Dodge Challenger
  • Propeller shaft centre bearings for Dodge Challenger
We also advise checking original equipment part numbers where possible, particularly on imported vehicles. Our customer support team consists of driveline specialists with extensive experience in Dodge models, ready to assist with fitment queries. With our fitment guarantee, you can order with complete confidence that your parts will fit accurately during installation.

Why choose CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders directly from our central warehouse in Helsingborg, Sweden across the European Union. Unlike general motor factors, our exclusive focus on drivetrain and power transmission components allows us to offer unmatched technical knowledge and a carefully curated inventory. Ordering from us means receiving high-grade spare parts tested to cope with challenging driving environments. We dispatch promptly across Europe, because we know how essential it is to get your vehicle back on the road without delay. Our goal is always to supply the correct component at a competitive price without compromising on technical standards. With a genuine passion for drivelines and thousands of satisfied customers across Europe, CVJoint24 is your dedicated partner for the Dodge Challenger.

Frequently asked questions about Dodge Challenger drivetrain parts

How do I know if my propeller shaft needs replacing?

The most common signs are body vibrations at certain speeds or a grinding noise from underneath the car, which often indicates an imbalance or a worn centre bearing.

Do these parts fit every Dodge Challenger model?

Our parts are tailored to specific variants. Always filter by your make, model and engine to ensure the part is verified for your exact model year and engine specification.

What is included when I buy a drive shaft for a Dodge Challenger?

Our drive shafts are supplied complete with inner and outer joints as well as boots, ready for direct installation on your car.

How quickly can I get my car parts delivered?

We strive to offer fast deliveries across Europe and dispatch stock items promptly from our central warehouse.

Do you offer a fitment guarantee?

Yes, we offer a fitment guarantee to ensure that the part fits your car correctly when you select your vehicle's exact make, model and engine.

Can I get help choosing the right part for an imported car?

Absolutely. Our customer support team are specialists in Dodge drivelines and can help you identify the correct parts even if your car has unique specifications.