Dodge Durango

Spare parts and drivetrain components for the Dodge Durango.

Products for Dodge Durango

42 products
1 - 24 of 42
Item no.:612454
  • Position: Rear
  • Splines gearbox side: 37
  • Splines wheel side: 32
  • Total length: 859 mm
Item no.:412931
  • Position: Rear
  • Splines gearbox side: 32
  • Splines wheel side: 32
  • Total length: 858 mm
Item no.:419749
  • Position: Rear
  • Splines gearbox side: 32
  • Splines wheel side: 32
  • Total length: 832 mm
Item no.:626416
  • Position: Rear
Item no.:213949
  • Position: Front right
Item no.:119151
  • Position: Front left
Item no.:346302
  • Position: Inner
  • Inner splines: 27
Item no.:0535231
  • Position: Outer
  • Inner splines: 34
  • Splines wheel side: 31
  • Seal diameter: 61 mm
  • Outer splines: 31
Item no.:7280029
  • Position: Front
  • Total length: 603 mm
  • Number of joints: 2
  • Outer diameter 1: 95 mm
  • Bolt circle diameter 1: 81 mm
Item no.:328506
  • Position: Front
  • Total length: 695 mm
  • Outer diameter 1: 95 mm
  • Bolt circle diameter 1: 81 mm
  • Outer diameter 2: 95 mm
Item no.:699928
  • Total length: 92 mm
  • Diameter: 27 mm
Item no.:393434
  • Total length: 82 mm
  • Diameter: 27 mm
Item no.:320418
  • Position: Front
  • Total length: 693 mm
Item no.:0553121
  • Position: Outer
  • Inner splines: 35
  • Splines wheel side: 31
  • Seal diameter: 61 mm
  • Total length: 93 mm
Item no.:3553437
  • Position: Outer
  • Inner splines: 26
  • Splines wheel side: 32
  • Seal diameter: 72 mm
  • Outer diameter: 94 mm
Item no.:328263
  • Total length: 670 mm
  • Number of joints: 2
  • Outer diameter 1: 95 mm
  • Bolt circle diameter 1: 81 mm
  • Outer diameter 2: 95 mm
Item no.:0645817
  • Total length: 124 mm
Item no.:0961631
  • Total length: 93 mm
  • Diameter: 29 mm
Item no.:0642471
  • Total length: 110 mm
Item no.:352653
  • Position: Front, Outer
  • Inner splines: 29
  • Splines wheel side: 32
  • Seal diameter: 72 mm
  • Outer diameter: 106 mm
Item no.:659544
  • Position: Rear, Outer
  • Inner splines: 27
  • Seal diameter: 72 mm
  • Outer splines: 32
  • Thread size: M22X1,5
Showing 1–24 of 42 products

Dodge Durango drivetrain

The Dodge Durango is renowned for its robust build and its ability to handle heavy loads and demanding terrain. Maintaining this level of performance requires a drivetrain in peak condition. The drivetrain is responsible for transferring engine power to the wheels, and on a heavy vehicle like the Durango, these components endure substantial stress. Every part, from the gearbox to the wheel hub, must work in perfect harmony to prevent unnecessary wear and costly repairs. At CVJoint24, we specialise in these precise components to give you complete confidence in your choice of spare parts.

Maintaining the drivetrain on a Dodge Durango is not simply about replacing parts when they fail; it is about understanding how the system functions as a whole. A worn component can quickly cause secondary damage to other parts of the power transfer system. By selecting the right spare parts, you ensure that the vehicle's driving dynamics are preserved and safety is never compromised. Our focus is on supplying parts that meet or exceed original specifications, which is crucial for American SUV models where torque outputs are notably high.

How the Dodge Durango drivetrain is engineered

The Dodge Durango frequently utilises advanced all-wheel-drive systems (AWD or 4WD) that demand precision at every link. Power leaves the engine and travels through the gearbox to a transfer box, which distributes torque to both the front and rear axles via propeller shafts. At the road wheels, drive shafts equipped with CV joints allow the wheels to travel vertically and steer while continuously delivering power. This complex layout means that every individual component, such as an outer CV joint for the Dodge Durango, plays a critical role in the vehicle's overall mobility.

The assembly is engineered to withstand both motorway cruising and light off-road driving, but the sheer weight of the vehicle places heavy loads on the rubber boots and the joint metallurgy during acceleration and cornering. Lubrication inside the constant velocity joints is absolutely vital; if a boot splits, grease escapes and road dirt penetrates, rapidly destroying the precision-machined surfaces within the joint. Understanding this arrangement helps you pinpoint the cause of unusual noises or vibrations and identify which parts need attention during servicing.

Common faults and symptoms

Several clear symptoms indicate that your Dodge Durango drivetrain is wearing out. One of the most typical signs is a clicking or knocking noise on full steering lock at low speeds, such as during parking manoeuvres. This almost invariably points to a worn outer CV joint. If you experience vibrations through the entire vehicle under acceleration instead, this can indicate failing inner CV joints or an unbalanced drive shaft. Addressing these symptoms promptly is essential to prevent a total breakdown on the road.

Another common issue is leaking CV boots. If you spot grease splattered on the inside of the wheel rim or within the wheel arch, the boot has split. Beyond mechanical noises, vibrations at higher speeds can also indicate problems with the prop shaft or its centre bearing. Because the Durango is a heavy vehicle, even minor imbalances are felt distinctly throughout the cabin. Regular inspections of the drivetrain components allow you to detect these faults early, saving both time and money in the long run.

Common parts to replace on the Dodge Durango

When carrying out drivetrain repairs on this model, certain components are more vulnerable than others. By far the most frequently replaced part is the outer CV joint. Owing to its location and continuous operating angles, it takes the brunt of the wear over the vehicle's lifespan. We supply dedicated components engineered for this purpose:

  • Outer CV joint for Dodge Durango – complete kits for straightforward replacement.

In addition to the joints themselves, boot kits are a frequently requested spare part. Replacing a damaged boot in good time can save an otherwise sound CV joint. While our current Durango range concentrates on specific key parts, every component we offer is thoroughly selected to match the exact specifications of this vehicle. Investing in high-grade induction-hardened steel components ensures your Dodge can cope with harsh European winters and the demands of heavy towing.

Find the right part for your Dodge Durango

Navigate directly to the relevant subcategory for your Dodge Durango:

On a vehicle with several potential drivetrain issues, starting in the right category saves time. By comparing the exact sections for the Dodge Durango, it becomes simpler to distinguish between drive shaft, CV joint or propeller shaft faults, taking you straight to the page that matches your symptoms and fitment.

Why choose CVJoint24?

CVJoint24 is not merely another general car parts website; we are a Swedish driveline specialist dedicated to high-performance drivetrain components. Our expertise means we understand the technical intricacies of the Dodge Durango power delivery far better than all-round motor factors. We combine a carefully curated inventory with in-depth technical know-how to guide your spare parts purchase. When you order from us, you can depend on accurate fitment and robust, durable parts that meet demanding standards.

We understand that when a vehicle is on the garage ramp, prompt dispatch and the correct parts are crucial. That is why we continually refine our stockholding and technical product data at our central warehouse in Helsingborg, Sweden. By focusing exclusively on our specialist niche—the drivetrain—we provide an expertise and range depth that general retailers struggle to match. Our mission is to be the obvious choice for every Dodge owner seeking to restore their vehicle's driveline to peak condition.

Frequently Asked Questions about Drivetrain Parts for Dodge Durango – Spare Parts & Expertise

How do I know if my Dodge Durango needs a new outer CV joint?

The most common sign is a clicking noise heard when turning sharply at low speeds. If the noise disappears when driving straight ahead, it is almost certainly a worn outer CV joint.

How do I find the correct parts for my Durango?

Simply select your Dodge Durango's model year and engine variant in our vehicle selector to find the exact parts tailored to your specific car.

What is included in a CV joint kit from CVJoint24?

Our outer CV joint kits for Dodge Durango typically include the joint itself, a model-specific CV boot, grease, clamps and any necessary fitting accessories such as circlips.

Why does my Dodge Durango vibrate during acceleration?

Vibrations under load are often caused by wear in the inner CV joints or an imbalance in the drive shafts. On four-wheel-drive models, a worn propeller shaft centre bearing can also be the cause.

Is it difficult to replace a CV joint on a Durango yourself?

It requires a fair amount of mechanical experience and the right tools, as components on an SUV are heavy-duty. We recommend having access to a workshop manual for your specific model year.

How often should I inspect the drivetrain on my Dodge?

We recommend a visual inspection of all CV boots and joints at every oil change or at least once a year to catch splits in the rubber before they cause expensive failures.