Dodge Journey

Spare parts and drivetrain components for the Dodge Journey.

Products for Dodge Journey

20 products
1 - 20 of 20
Item no.:219941
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 32
  • Total length: 584 mm
Item no.:212698
  • Position: Front right
  • Splines wheel side: 32
  • Inner splines: 28
  • Total length: 996 mm
Item no.:355506
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 41
  • Outer diameter: 80 mm
Item no.:110814
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 32
  • Total length: 646 mm
Item no.:152331
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 32
  • Seal diameter: 56,7 mm
  • Thread size: M22x1,5
Item no.:1122836
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 32
  • Total length: 641 mm
Item no.:257015
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 32
  • Thread size: M22X1,5
Item no.:1185078
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 25
  • Total length: 624 mm
Item no.:1142224
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 32
  • Total length: 655 mm
Item no.:2170653
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 32
  • Total length: 522 mm
  • Joint diameter: 91 mm
Item no.:417978
  • Position: Rear left
  • Splines gearbox side: 25
  • Splines wheel side: 32
  • Total length: 768 mm
  • Diameter 1: 79 mm
Item no.:514886
  • Position: Rear right
  • Splines gearbox side: 25
  • Splines wheel side: 32
  • Total length: 866 mm
  • Diameter 1: 79 mm
Item no.:624506
  • Total length: 2,200 mm
  • Number of joints: 2
Item no.:410179
  • Position: Rear left
  • Splines gearbox side: 25
  • Splines wheel side: 32
  • Total length: 770 mm
Item no.:119064
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 32
  • Total length: 637 mm
  • Diameter 1: 91 mm
Item no.:217806
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 32
  • Total length: 580 mm
  • Diameter 1: 91 mm
Item no.:117399
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 32
  • Total length: 641 mm
  • Diameter 1: 91 mm
Item no.:218143
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 32
  • Total length: 619 mm
  • Diameter 1: 91 mm
Item no.:251924
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 32
  • Thread size: M22X1,5

Drivetrain for Dodge Journey

The Dodge Journey is a versatile vehicle that places high demands on its drivetrain, whether used for city driving or extended family journeys. As specialists in the drivetrain, we understand the importance of every transmission component operating in perfect harmony. The drivetrain is the system that transfers engine power to the wheels, and on a heavier vehicle like the Dodge Journey, these parts endure considerable strain under acceleration, cornering, and varying road conditions. We have tailored our range to offer parts that meet or exceed original specifications to guarantee durability.

Choosing the right spare parts for your Dodge Journey ensures not only reliability but also fuel efficiency. A worn drivetrain can lead to energy loss and unnecessary wear on surrounding mechanical components. With us, you will find the technical expertise required to navigate the different variants available for this model, making us the natural choice for drivers seeking quality and peace of mind.

How the drivetrain is engineered on the Dodge Journey

The drivetrain on a Dodge Journey is engineered to handle front-wheel drive and, on certain configurations, all-wheel drive. The system begins at the gearbox, where power is distributed to the wheels via drive shafts. These shafts are fitted with CV joints that allow the wheels to move with the suspension and steer while constantly transmitting power. It is a precision mechanical setup essential for a vibration-free driving experience.

On all-wheel-drive models, additional components such as a propeller shaft and differentials are fitted, but the core of the system for most Journey owners remains the front drive shafts. Each Dodge Journey drive shaft is designed to withstand the torque generated by the engine. Because the Dodge Journey frequently serves as a heavily laden family vehicle, the choice of materials in the driveshafts and joints is critical to withstand metal fatigue over time.

Common faults and symptoms

There are several clear signs that the drivetrain on your Dodge Journey is wearing out. One of the most common symptoms is a clicking or knocking noise when cornering sharply at low speeds. This typically indicates that an outer CV joint is failing, frequently caused by a split CV boot that has allowed grease to escape and dirt to enter. If you instead experience vibrations through the steering wheel or throughout the car during acceleration, an inner CV joint or an unbalanced or damaged drive shaft may be at fault.

Another symptom to look out for is grease spots on the inside of the wheel rim or underneath the car. This usually stems from a damaged rubber CV boot. If left unaddressed, the CV joint will fail rapidly. By catching these early warning signs, you can avoid costly repairs and ensure your Dodge Journey stays safe on the road.

Common parts to replace on the Dodge Journey

When maintaining the driveline on a Dodge Journey, certain components require replacement more often than others. Based on our experience, the drive shaft is the key part replaced to restore factory driving characteristics. We supply dedicated components for this model to cover the most frequent needs. Below are the most relevant categories for your vehicle:

  • Drive shafts for Dodge Journey – Complete shafts for straightforward installation and maximum reliability.

Replacing a complete drive shaft is often far more time-effective and economical than replacing individual joints, especially if the vehicle has covered high mileage. It ensures that all components, including CV boots and clips, are brand new and work together seamlessly. We always recommend inspecting both sides when a fault is detected, as wear is often equal on the left and right sides.

Finding the right part for your Dodge Journey

Continue to the relevant subcategory for your Dodge Journey:

On a vehicle with multiple possible drivetrain issues, it is best to start in the correct category right away. Comparing the exact component sections for the Dodge Journey makes it straightforward to distinguish between faults in the drive shaft, constant velocity joint, or prop shaft, directing you to the page that matches your symptoms and fitment.

Finding the right spare part for an American model like the Dodge Journey can sometimes be challenging due to varying specifications across markets. Therefore, we provide clear vehicle filtering based on make, model, and engine variant. By selecting your car's exact details, you will find verified parts tailored to your vehicle, eliminating any guesswork regarding spline counts, shaft lengths, and other technical specifications.

When searching for a Dodge Journey driveshaft, it is important to confirm whether your car has an automatic or manual gearbox, as well as the engine size. Our catalogue accounts for all these parameters. If you ever feel uncertain, our category specialists are on hand to guide you, ensuring you receive the correct part first time.

Why shop with CVJoint24

CVJoint24 is not just another general car parts retailer; we are a dedicated specialist focusing entirely on drivetrains and power transmission. As the international shop of a Swedish driveline specialist, we have an extensive understanding of the demanding conditions European roads place on your Dodge Journey. We combine a deep inventory with expert technical know-how to ensure you get components that fit accurately and last.

We put quality and precise fitment at the forefront of everything we do. By shopping with us, you partner with a team that values a dependable driveline. With our straightforward vehicle selector, exact specifications, and passion for transmission parts, we offer the most reliable buying experience for Dodge Journey owners across Europe.

Frequently Asked Questions about Dodge Journey Drivetrain – Power Transmission Spare Parts

How do I know if my Dodge Journey needs a new drive shaft?

The most common signs are clicking noises when making sharp turns, vibrations during acceleration, or visible grease leaks from split CV boots around the CV joints.

Do all drive shafts fit every Dodge Journey model?

No, there are differences depending on engine variant, gearbox (manual or automatic), and whether the car is front-wheel drive or four-wheel drive. Select your vehicle make, model and engine to find the right part.

Is it better to replace the entire drive shaft rather than just the CV joint?

On a Dodge Journey, it is often more cost-effective to replace the complete drive shaft. It saves labour time and gives you new inner and outer joints, as well as fresh CV boots, all in one go.

Why is my Dodge Journey vibrating under acceleration?

Vibrations when accelerating are often caused by wear in the inner CV joints. This is a common issue on heavier vehicles like the Journey as the mileage creeps up.

Can I drive with a split CV boot on my Dodge Journey?

We strongly advise against it. A split boot allows dirt and moisture in, which quickly destroys the CV joint and can lead to complete drivetrain failure.

How many drive shafts for Dodge Journey do you stock?

We currently stock 4 specific drive shafts tailored for the Dodge Journey, covering the most common requirements on European roads.