Dodge RAM Van

Welcome to your drivetrain specialist for the Dodge RAM Van. Maintaining the power transmission system on a working vehicle like the RAM Van is essential for reliability and performance....

Products for Dodge RAM Van

6 products
1 - 6 of 6
Item no.:1148094
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 635 mm
  • ABS teeth: 47
Item no.:1110832
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 640 mm
  • ABS teeth: 47
Item no.:2126060
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 1,029 mm
  • ABS teeth: 47
Item no.:210641
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 1,032 mm
  • ABS teeth: 47
Item no.:334830
  • ABS teeth: 47
  • Inner diameter: 84 mm
  • Outer diameter: 95 mm
  • Width: 12 mm
Item no.:328788
  • Total length: 85 mm
  • Diameter: 30 mm

Drivetrain for Dodge RAM Van

The Dodge RAM Van is a vehicle built for demanding tasks, which places exceptionally high demands on its drivetrain. The power transmission system is central to the vehicle's ability to carry loads and handle varying road conditions. When discussing the drivetrain for this specific model, it comes down to maintaining the durability Dodge is known for. Every component, from the smallest bolt to the longest shaft, must work together to minimise power loss and maximise longevity. Here at CVJoint24, you will find parts specifically tailored to meet these requirements. We understand that a Dodge RAM Van is often used for commercial work, meaning the quality of replacement parts is critical to avoiding costly downtime.

By selecting the right components, you ensure your vehicle continues to deliver power to the wheels efficiently and safely, whether you drive on the motorway or in city traffic. Our range is handpicked to provide the best balance of price and performance, which is especially important for heavy-duty commercial vehicles where wear and tear is higher than average.

How the drivetrain is configured on the Dodge RAM Van

The drivetrain setup on a Dodge RAM Van is engineered to handle substantial torque and heavy payloads. The system consists of several critical components operating in unison. Engine power passes through the gearbox and out to the wheels via a combination of shafts. For rear-wheel-drive or four-wheel-drive models, a propeller shaft for the Dodge RAM Van plays a vital role in transmitting power along the vehicle's chassis. Further out toward the wheels, the drive shafts take over, equipped with CV joints that allow the wheels to move with the suspension and steer while continuously transferring drive.

This mechanical assembly is subjected to severe strain, particularly when pulling away with heavy loads or traversing rough surfaces. Understanding this structure is essential for diagnosing where a fault has developed. A properly functioning drivetrain delivers not only superior handling but also improved fuel economy and reduced wear on the rest of the vehicle. We supply the technical specifications required so you can maintain this complex system correctly.

Common faults and symptoms

There are several distinct signs that drivetrain components on your Dodge RAM Van are beginning to fail. One of the most frequent symptoms is vibration felt through the bodywork during acceleration or at specific road speeds, which can often be traced back to an out-of-balance or worn prop shaft. If you hear a clicking or knocking noise when making sharp turns, this is a classic sign of a worn outer CV joint. Furthermore, a pulsing brake pedal or an illuminated ABS light can indicate that an ABS ring for the Dodge RAM Van has cracked or corroded, disrupting the wheel speed sensor signal.

It is crucial not to ignore these warning signs. A minor fault, such as a split CV boot, can quickly let road grime into the constant velocity joint and lead to complete failure. By staying alert to changes in vehicle behaviour and unusual noises, you can resolve issues early, saving both time and money in the long run. Routine inspection of drivetrain components is key to trouble-free vehicle ownership.

Common parts to replace on the Dodge RAM Van

When repairs are due, certain parts feature more frequently in replacement schedules for the Dodge RAM Van. Here are the key categories to consider:

  • Drive shafts for Dodge RAM Van: These shafts transfer power directly to the road wheels and are critical for vehicle propulsion.
  • Propeller shaft: For versions requiring power delivery to the rear axle, the prop shaft is a vital assembly that often requires attention when driveline vibrations develop.
  • ABS ring: A compact yet essential component for vehicle safety systems that is frequently exposed to corrosion and mechanical wear.

Replacing a complete driveshaft can sometimes prove more cost-effective than overhauling an individual joint, especially if the shaft shows signs of fatigue. We ensure the car parts we supply meet or exceed original equipment standards, giving you confidence that your Dodge remains dependable for thousands of kilometres ahead.

How to find the right part for your Dodge RAM Van

Proceed to the relevant section for your Dodge RAM Van:

On a vehicle with multiple potential drivetrain faults, starting in the correct category is sensible. By comparing the exact component sections for the Dodge RAM Van, it becomes straightforward to distinguish between drive shaft, CV joint or propeller shaft issues and continue to the page best suited to your symptoms and fitment.

Finding the exact replacement component for an American vehicle such as the Dodge RAM Van can occasionally seem challenging due to varying specifications. The simplest and most dependable way to navigate our range is to select your vehicle by make, model and engine variant. Filtering by your precise specification displays the spare parts engineered for your vehicle, eliminating guesswork over shaft lengths, ABS ring tooth counts or propeller shaft flange dimensions.

The following categories are available for your model:

  • Drive shafts for Dodge RAM Van
  • Propeller shafts for Dodge RAM Van
  • ABS rings for Dodge RAM Van
We always recommend cross-checking the technical specifications listed on the product page with the components fitted to your van, though our catalogue is structured to make finding the right part straightforward. Should you need guidance, our technical team is available to assist. Our aim is to help you select correctly first time, confident that your order will fit seamlessly during installation.

Why shop at CVJoint24

CVJoint24 is far from an ordinary car parts retailer; we are the international shop of a Swedish driveline specialist with our central warehouse in Helsingborg, Sweden, dedicated entirely to drivelines and power transmission. When you buy from us, you benefit from specialist knowledge rarely matched by general motor factors. We offer an exact-fit guarantee, taking full responsibility that the parts we recommend fit your Dodge RAM Van. With swift dispatch across the European Union, we keep your commercial vehicle's time off the road to a minimum.

We stock an extensive range of high-grade components from reputable manufacturers, ensuring you receive quality components at competitive rates. As our customer, you can rely on our deep understanding of complex driveline engineering, with full support throughout your purchase. Our specialist focus on Dodge and other major marques makes us the preferred destination for DIY mechanics and professional workshops requiring dependable driveline solutions.

Frequently Asked Questions about Drivetrain for Dodge RAM Van

How do I tell if the drive shaft on my Dodge RAM Van is failing?

Common signs include clicking noises when taking sharp turns or vibrations through the steering wheel under acceleration, which indicate worn CV joints.

Can I buy an individual ABS ring for my Dodge RAM Van?

Yes, we supply standalone ABS rings, which are a very cost-effective alternative to replacing the complete drive shaft when the sensor generates fault codes.

What causes vibrations in a Dodge RAM Van?

They are frequently caused by imbalance or wear in the propeller shaft, worn centre bearings, or inner CV joints that have developed play.

How does the fitment guarantee work for my Dodge?

When you select your car's make, model, and engine variant and we confirm the part, we guarantee it will fit your vehicle, or we will help you with a free exchange.

Is the propeller shaft on the RAM Van different compared to other Dodge models?

Yes, length and mountings vary depending on the wheelbase and drivetrain. Always select your exact model and engine to ensure the correct specification.

How quickly will my spare parts be delivered?

We aim for next-day dispatch for most in-stock parts, getting your Dodge RAM Van back on the road without delay.