Drive shafts for Audi 80 Avant 1.9 TD

Looking for a high-quality drive shaft for your Audi 80 Avant 1.9 TD? As driveline specialists, we supply model-specific components designed for a precise fit on your car. For this...

Products for Drive shafts for Audi 80 Avant 1.9 TD

16 products
1 - 16 of 16
Item no.:2124678
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 573 mm
  • Joint diameter: 90 mm
  • ABS teeth: 45
Item no.:7301921
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 573 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:111768
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 586 mm
  • Joint diameter: 90 mm
  • ABS teeth: 45
Item no.:210181
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 572 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:214901
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 572 mm
  • Joint diameter: 81 mm
  • ABS teeth: 45
Item no.:7301806
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 584 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:110510
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 584 mm
  • Joint diameter: 81 mm
  • ABS teeth: 45
Item no.:1110015
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 470 mm
  • Diameter 1: 88 mm
  • Diameter 2: 130 mm
Item no.:110054
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 470 mm
  • Diameter 1: 88 mm
  • ABS teeth: 45
Item no.:210652
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 523 mm
  • Diameter 1: 88 mm
  • Diameter 2: 130 mm
Item no.:211170
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 523 mm
  • Diameter 1: 88 mm
  • ABS teeth: 45
Item no.:7301804
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 586 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:1165507
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 470 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:2155845
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 523 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1129614
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 470 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:2119936
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 523 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45

Drive shafts for Audi 80 Avant 1.9 TD

The Audi 80 Avant 1.9 TD is an iconic estate known for its dependable diesel engine and robust build quality. To maintain the car's road manners and safety, it is essential that the drive shafts remain in top condition. A drive shaft for this specific model must cope with the solid low-end torque generated by the 1.9 TD engine, particularly under hard acceleration and when carrying heavy loads. As driveline specialists, we understand the technical demands of this exact vehicle variant and supply components that meet or exceed original equipment specifications. Choosing the correct replacement parts ensures your Audi keeps running for thousands of kilometres without unnecessary breakdowns.

What does a drive shaft do on an Audi 80 Avant 1.9 TD?

On a front-wheel-drive car like the Audi 80 Avant 1.9 TD, the main role of the drive shaft is to transfer rotational torque from the gearbox directly to the front road wheels. It does this via two CV joints: an inner joint fitted at the gearbox end and an outer joint at the wheel hub. The drive shaft must transmit driving force continuously while accommodating the up-and-down movement of the suspension and the steering angle of the wheels. For a torquey diesel estate, this subjects the driveshaft assembly to considerable stress every time you accelerate. A sound drive shaft is therefore vital for both vehicle performance and passenger comfort.

Common signs of wear

Several clear warning signs indicate that a drive shaft on your Audi 80 Avant 1.9 TD is beginning to fail. One of the most typical symptoms is a distinct clicking or knocking noise when negotiating tight turns at low speed, which usually points to a worn outer CV joint. If you notice vibrations through the steering wheel or throughout the cabin under acceleration, a worn inner joint is often the culprit. It is also crucial to inspect the CV boots; if they split or tear, lubricating grease escapes and road dirt enters, rapidly destroying the precision moving parts inside. Ignoring these symptoms can ultimately lead to complete failure, leaving you stranded at the roadside.

How to choose the correct drive shaft

Finding the exact replacement drive shaft for an Audi 80 Avant 1.9 TD requires close attention to detail. Dimensions such as overall length, spline tooth counts and whether the vehicle is equipped with an ABS ring can vary across production years and trim specifications. To ensure you purchase a part with guaranteed fitment, we always recommend selecting your car by make, model and engine variant in our vehicle selector. This filters out incompatible options and shows only the parts engineered for your car. Check also whether you require an entire drive shaft assembly or simply a replacement joint. At CVJoint24, we are always on hand to help you find the right drive shafts for Audi first time.

Related parts to check

We recommend inspecting these matching product pages for the same vehicle whenever carrying out work on your drive shafts:

When one driveline component shows signs of wear, neighbouring parts on the same car often require attention as well. By checking these related categories for your Audi 80 Avant 1.9 TD, you can more easily pinpoint whether an issue stems from the complete drive shaft assembly or another component in the drivetrain.

This is especially important on older diesel models, where vibrations, play and mechanical noises can travel between adjacent drivetrain parts. Checking related categories helps avoid replacing one component while missing an adjacent worn part that produces the very same symptoms.

Why buy from CVJoint24?

CVJoint24 is the international webshop of a Swedish driveline specialist, dispatching orders across Europe from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with a comprehensive catalogue of quality parts to give you a dependable shopping experience. With our precise fitment assurance, you can order with confidence knowing the parts will fit your Audi 80 Avant 1.9 TD accurately. We know how important it is to get your vehicle back on the road quickly, which is why we provide fast EU-wide delivery across our stocked range. By focusing on durability and engineering precision, we ensure you always get high-grade car parts at competitive prices from specialists who know your drivetrain inside out.

Frequently asked questions about drive shafts for Audi 80 Avant 1.9 TD

How do I know if my Audi 80 Avant 1.9 TD needs a new drive shaft?

The most common signs are clicking noises when turning, vibrations under acceleration, or visible damage and grease leaks from the drive shaft boots.

Does the same drive shaft fit both the left and right side of my Audi 80?

This varies depending on the model year and gearbox. Select your car's exact make, model and engine to check whether the shafts are symmetrical or if specific parts are required for each side.

Are CV boots and grease included when I buy a complete drive shaft?

Yes, when you purchase a complete drive shaft from us, it comes fully assembled with CV boots, clips and high-quality grease ready for direct installation.

Can I replace just the CV joint instead of the entire shaft?

Yes, if the shaft bar itself is undamaged, you can often save money by replacing just the inner or outer CV joint. We keep both options in stock.

How does the torque of the 1.9 TD engine affect drive shaft wear?

Diesel engines produce higher torque at low revs, which places greater strain on drivetrain components during pull-away and acceleration compared to petrol engines.

Is it difficult to replace the drive shaft yourself on an Audi 80 Avant?

It requires certain specialist tools and mechanical experience. If you are unsure, we recommend consulting a professional garage, but with the right equipment it is entirely feasible for a DIY mechanic.