Drive shafts for Audi A3 Sportback 40 Tfsi Quattro

Looking for a replacement drive shaft for your Audi A3 Sportback 40 Tfsi Quattro? As Swedish driveline specialists, we supply precision-engineered components tailored specifically to...

Products for Drive shafts for Audi A3 Sportback 40 Tfsi Quattro

6 products
1 - 6 of 6
Item no.:1101103
  • Position: Front left
  • Total length: 560 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:613726
  • Position: Rear
  • Diameter: 83 mm
  • Flange diameter: 94 mm
  • Inner splines: 33
  • Total length: 630 mm
Item no.:613461
  • Position: Rear
  • Total length: 587 mm
  • Splines wheel side: 36
Item no.:218554
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 601 mm
  • Splines wheel side: 36
Item no.:314640
  • Position: Front
  • Inner splines: 27
  • Total length: 602 mm
  • Splines wheel side: 36
Item no.:1164977
  • Position: Front left
  • Total length: 560 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36

Drive shafts for Audi A3 Sportback 40 Tfsi Quattro

Finding the right drive shaft for your Audi A3 Sportback 40 Tfsi Quattro is vital to maintaining the car's advanced handling and safety. This specific model, equipped with Audi's renowned four-wheel drive, places rigorous demands on its driveline components. A defective drive shaft can not only cause unpleasant noises but also affect stability and the vehicle's ability to distribute power effectively between the wheels. Here at CVJoint24, you will find carefully selected drive shafts engineered to meet or exceed original specifications for your exact vehicle. With our focus on precision and quality, you can be confident that the parts you order will fit perfectly and endure over time. We understand that the 40 TFSI Quattro drivetrain requires components capable of handling high torque alongside the stresses of all-wheel drive, which is why we only supply car parts we trust ourselves.

What does a drive shaft do on an Audi A3 Sportback 40 Tfsi Quattro?

The drive shaft on an Audi A3 Sportback 40 Tfsi Quattro has the critical role of transmitting torque from the gearbox and differential directly to the wheels. Because this model is a Quattro, power is distributed across both the front and rear axles, meaning the drive shafts operate under varying loads depending on road surfaces and driving style. A drive shaft consists of an axle bar with joints at either end that allow the wheels to move up and down with the suspension and steer, all while delivering continuous drive. Without fully functioning drive shafts, your Audi would lose drive, preventing the sophisticated all-wheel-drive system from working as designed. It is an intricate mechanical link that must cope with continuous angle and length changes while driving, making material quality and manufacturing precision paramount for a long service life.

Common signs of wear

There are several telltale signs that a driveshaft on your Audi A3 Sportback 40 Tfsi Quattro is beginning to wear out or has failed. One of the most frequent symptoms is a clicking or knocking noise when taking sharp corners at low speeds, typically pointing to a worn outer CV joint. Vibrations through the steering wheel or the entire chassis under acceleration often indicate an issue with the inner constant velocity joint or an imbalance in the shaft itself. If you spot grease splattered on the inside of the wheel rim or around the wheel arch, a CV boot has split, quickly allowing road dirt in to destroy the joint. Ignoring these warnings can result in total failure, potentially damaging surrounding suspension parts or the gearbox. Furthermore, a faulty drive shaft can interfere with the ABS if the ABS ring mounted on the shaft is cracked or corroded.

How to choose the correct drive shaft

To choose the correct drive shaft for your Audi A3 Sportback 40 Tfsi Quattro, you need to consider several technical factors. Because the Quattro system features drive shafts at both the front and rear, you must first establish the exact fitting position. There may also be differences between the left and right sides due to gearbox layout and shaft length. The most reliable way to find the correct spare parts is to select your car's make, model and engine in our store. This filters the range down to the options tailored specifically to your vehicle's chassis specification and powertrain. Always verify key specifications such as length, spline tooth counts, and whether the shaft is supplied complete with joints and CV boots. Selecting the right fitment from the start saves both time and money during fitting, ensuring your car's safety systems function seamlessly.

Related parts to check

Feel free to check these specific pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, neighbouring parts on the same car often require attention as well. By checking these exact pages for the Audi A3 Sportback 40 Tfsi Quattro, it becomes much easier to determine whether an issue lies with the drive shaft itself or with an adjacent part of the drivetrain.

This is especially important on models where vibrations, play and unusual noises can travel between several driveline components. A quick check of related categories reduces the risk of replacing one correct part while overlooking an adjacent component contributing to the same problem.

By inspecting these components at the same time, you can prevent future issues and save time at the garage. A thorough inspection of the drivetrain ensures your Audi continues to deliver the refined performance and four-wheel-drive dynamics you expect from a premium vehicle.

Why shop at CVJoint24?

CVJoint24 is your dedicated partner for premium driveline parts across Europe. As the international shop of a Swedish driveline specialist, we offer an extensive inventory catering for standard road cars through to technically demanding vehicles such as the Audi A3 Sportback 40 Tfsi Quattro. When you order from us, you get reliable car parts backed by specialist knowledge and guaranteed fitment. We understand how crucial it is to get the correct part first time, providing intuitive make, model and engine filtering to remove any guesswork. With fast dispatch across the EU directly from our warehouse in Helsingborg, Sweden, we help you get your car back on the road without delay. We strive to provide the right parts at competitive prices, making us the clear choice for both DIY mechanics and professional garages who refuse to compromise on quality.

Frequently asked questions about drive shafts for Audi A3 Sportback 40 Tfsi Quattro

How do I know if the front or rear drive shaft is damaged on my Quattro?

The noise can often reveal the location. A clicking sound when cornering indicates worn front outer CV joints, whilst vibrations felt beneath the car can point to the rear drive shafts or the propeller shaft.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, provided the shaft itself is straight and undamaged, you can often replace just the inner or outer CV joint to save money.

Why does my Audi A3 Sportback 40 Tfsi Quattro vibrate under acceleration?

Vibration under acceleration is a classic symptom of a worn inner CV joint. It can also stem from an unbalanced drive shaft or an issue with the propeller shaft.

Do all Audi A3 drive shafts fit a 40 TFSI Quattro?

No, Quattro models often require specific drive shafts due to the all-wheel drive system and transmission setup. Always select your exact make, model and engine to find the correct part.

What happens if a drive shaft boot tears?

If the boot splits, grease leaks out and dirt gets in. This quickly ruins the CV joint, eventually causing total failure.

Do you offer a guaranteed fit for drive shafts?

Yes, when you select your vehicle's exact make, model and engine and choose the recommended part, your purchase is covered by our fitment guarantee.