Drive shafts for Audi A4 Avant 1.8 T Quattro

Discover our range of drive shafts tailored for the Audi A4 Avant 1.8 T quattro. The selection is curated to cover four-wheel-drive estate models across multiple model years. Select your...

Products for Drive shafts for Audi A4 Avant 1.8 T Quattro

41 products
25 - 41 of 41
Item no.:2108267
  • Position: Front right
  • Joint diameter: 88 mm
  • Total length: 617 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:316872
  • Position: Front
  • Flange diameter: 123 mm
  • Joint diameter: 83,6 mm
  • Total length: 466 mm
  • ABS teeth: 45
Item no.:610941
  • Position: Rear
  • Joint diameter: 88 mm
  • Total length: 593 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:215140
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 638 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:611588
  • Position: Rear
  • Total length: 593 mm
  • Splines wheel side: 33
  • Diameter 1: 90 mm
  • ABS teeth: 45
Item no.:1188621
  • Position: Front left
  • Joint diameter: 88 mm
  • Total length: 614 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:313064
  • Position: Front
  • Joint diameter: 88 mm
  • Total length: 498 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:314289
  • Position: Front
  • Total length: 522 mm
  • Seal ring diameter: 60 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2196349
  • Position: Front right
  • Joint diameter: 88 mm
  • Total length: 636 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:1185220
  • Position: Front left
  • Joint diameter: 98 mm
  • Total length: 596 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2158411
  • Position: Front right
  • Joint diameter: 98 mm
  • Total length: 618 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:113881
  • Position: Front left
  • Flange diameter: 124 mm
  • Total length: 595 mm
  • Seal ring diameter: 60 mm
  • ABS teeth: 45
Item no.:211936
  • Position: Front right
  • Flange diameter: 124 mm
  • Total length: 615 mm
  • Splines gearbox side: 123
  • ABS teeth: 45
Item no.:218760
  • Position: Front right
  • Total length: 620 mm
  • Splines gearbox side: 130
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:319369
  • Position: Front
  • Total length: 525 mm
  • Splines gearbox side: 123
  • Splines wheel side: 38
  • Joint diameter, gearbox side: 123 mm
Item no.:2184110
  • Position: Front right
  • Flange diameter: 130 mm
  • Total length: 500 mm
  • Splines gearbox side: 130
  • ABS teeth: 45
Item no.:315555
  • Position: Front
  • Total length: 625 mm
  • Splines gearbox side: 100
  • Splines wheel side: 38
  • ABS teeth: 45
Showing 25–41 of 41 products

Drive shafts for Audi A4 Avant 1.8 T Quattro

When it comes to power transmission in an Audi A4 Avant 1.8 T Quattro, the drive shaft is one of the most critical components. This particular model, renowned for its dependable turbocharged engine and advanced Quattro system, places high demands on its mechanical parts. A drive shaft must be able to handle both the torque from the 1.8 T engine and the stresses involved in four-wheel drive. With us, you will find a wide range of drive shafts carefully selected to meet or exceed original equipment specifications. We understand the importance of precision, which is why every part in our range is verified to fit your car's exact chassis and drivetrain.

Owning an Audi A4 Avant often means valuing driving dynamics and safety. Maintaining these qualities requires components that stand the test of time. Our drive shafts are manufactured from robust materials designed to withstand harsh European winters and the wear and tear of both city driving and long motorway journeys. By choosing the right part from the outset, you minimise the risk of future problems and ensure your car continues to deliver the performance you expect.

What does a drive shaft do on an Audi A4 Avant 1.8 T Quattro?

The primary job of the drive shaft on an Audi A4 Avant 1.8 T Quattro is to transmit rotational force from the gearbox and differentials out to the wheels. Because the Quattro system distributes power between all four wheels, the drive shafts play a central role in maintaining traction and stability across varied driving conditions. Without functioning driveshafts, engine power would never reach the road, making them indispensable to the vehicle's propulsion.

On this specific Audi model, the drive shafts work alongside both the front and rear differentials. They must articulate and move in harmony with the car's suspension and steering, made possible by integrated CV joints. This constant articulation means the drive shaft is subjected to immense mechanical stresses whenever you accelerate, corner, or drive over uneven surfaces. Appreciating this complexity makes it clear why the quality of a replacement shaft is so vital to your car's overall health.

Common signs of wear

Several clear symptoms indicate that a drive shaft on your Audi A4 Avant 1.8 T Quattro is beginning to fail. One of the most frequent signs is a clicking or knocking noise heard when making sharp turns at low speeds. This is often caused by a worn outer CV joint or one that has lost its lubrication due to a split CV boot. If you notice vibrations through the steering wheel or chassis under acceleration, it may instead indicate imbalance or wear in the inner constant velocity joint.

Another warning sign is grease spattered on the inside of the wheel rim or around the wheel arch. This happens when the protective boot splits and flings out grease, quickly causing the CV joint to overheat and wear out. Ignoring these early warning signs can ultimately result in total failure where the drive shaft snaps, leaving the car completely without drive. Regular inspection of CV boots and listening for unusual noises is therefore a wise investment for any Audi owner.

How to choose the correct drive shaft

Choosing the correct drive shaft for an Audi A4 Avant 1.8 T Quattro can be tricky, as variations exist depending on model year, gearbox type, and whether the shaft is for the front or rear axle. The most important step is to check the number of splines (teeth) on both the inner and outer ends of the shaft, as well as measuring its overall length. Because Quattro models have specific requirements to operate seamlessly with four-wheel drive, matching these specifications precisely is essential.

To make selection straightforward, we always recommend filtering by your car's exact make, model and engine variant to display only the parts relevant to your vehicle. Also verify whether your car is fitted with ABS, as the driveshaft often features an integrated ABS ring that must correspond with your car's sensor system. Taking care with these details ensures a trouble-free installation and a long service life for your new replacement part.

Related components to check

Feel free to inspect these exact pages for the same vehicle when working on your drive shaft:

When one drivetrain component shows signs of wear, nearby parts on the same vehicle often warrant inspection as well. Comparing these exact pages for the Audi A4 Avant 1.8 T Quattro makes it easier to determine whether the issue lies with the drive shaft itself or another adjacent part of the power transmission.

This is particularly relevant on models where vibrations, play, and noises can transfer symptoms across several parts in the same drivetrain. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that contributes to the very same problem.

By renewing damaged CV boots or inspecting the propeller shaft centre bearing while changing a drive shaft, you can save both time and money in the long run. A comprehensive overhaul of the drivetrain delivers a safer driving experience and substantially extends the service life of your vehicle.

Why buy from CVJoint24?

CVJoint24 is your dedicated European specialist in driveline components, operating from our central warehouse in Helsingborg, Sweden. We combine in-depth technical knowledge with a broad product range to provide the best possible solution for your Audi A4 Avant 1.8 T Quattro. Our primary focus is on supplying parts with a precise fit, backed by our fitment guarantee. When you order from us, you can rest assured you are receiving components tested and selected by specialists who understand the rigorous demands of modern cars.

We dispatch quickly across the EU to help you get your car back on the road without delay. Our goal is to remove the uncertainty from purchasing car parts. Whether you are a DIY mechanic or a professional garage, you gain access to specialist expertise and an extensive inventory covering everything from drive shafts to ABS rings. Choose the right part first time with CVJoint24 and experience the difference of a dedicated specialist.

Frequently asked questions about drive shafts for Audi A4 Avant 1.8 T Quattro

How do I know if the drive shaft fits my Audi A4 Avant 1.8 T Quattro?

The easiest way is to select your car's make, model and engine variant in our search filter. We have 19 matching items for this model, and our fitment guarantee ensures you get the correct part for your vehicle's exact specification.

What are the most common symptoms of a failing drive shaft?

The most common signs are clicking noises when cornering, vibrations under acceleration, and grease leaking from split CV boots. If you notice any of these symptoms, the drive shaft should be inspected straight away.

Does the drive shaft include CV joints and boots?

Yes, our complete drive shafts are supplied fully assembled with both inner and outer CV joints as well as protective CV boots, ready for direct installation on your Audi.

Are the drive shafts different between the front and rear on a Quattro?

Yes, the front and rear drive shafts differ in length and mounting points. It is therefore crucial to check the fitting position before ordering to ensure correct fitment.

Do I need to replace both drive shafts at the same time?

It is not strictly necessary, but if one driveshaft is worn out, the other on the same axle has typically covered the same mileage and may also be near the end of its service life. Many drivers choose to replace both to prevent another trip to the garage.

What is covered by your fitment guarantee?

Our fitment guarantee means that if you choose your vehicle's make, model and engine variant and a recommended part does not fit as expected, we will help you find the correct replacement at no extra charge or accept it back for a return.