Drive shafts for Audi A4 Avant 2.0 TDI 16V

Looking for a replacement drive shaft for your Audi A4 Avant 2.0 TDI 16V? At CVJoint24, you will find a carefully curated range of drive shafts engineered specifically for this engine...

Products for Drive shafts for Audi A4 Avant 2.0 TDI 16V

15 products
1 - 15 of 15
Item no.:3113261
  • Position: Front
  • Splines wheel side: 38
  • Total length: 521 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:1176691
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 611 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2100322
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 625 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:1167069
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 595 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2117491
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2125224
  • Splines wheel side: 38
  • Total length: 619 mm
  • Joint diameter, gearbox side: 104 mm
  • ABS teeth: 45
Item no.:118123
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 590 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:1109549
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 593 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:2104386
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 613 mm
  • Joint diameter, gearbox side: 100 mm
  • ABS teeth: 45
Item no.:2138550
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 621 mm
  • Joint diameter: 100 mm
  • ABS teeth: 45
Item no.:1142271
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 611 mm
  • Joint diameter: 100 mm
  • ABS teeth: 45
Item no.:1135593
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 596 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2138990
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 618 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:1102202
  • Splines wheel side: 38
  • Total length: 595 mm
  • Joint diameter, gearbox side: 123 mm
  • Seal ring diameter: 59,5 mm
  • Thread size: M16x1.5
Item no.:2158557
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter, gearbox side: 123 mm

Drive shafts for Audi A4 Avant 2.0 TDI 16V

The Audi A4 Avant 2.0 TDI 16V is a popular model renowned for its balance of performance and everyday practicality. To preserve the car's handling characteristics and safety, keeping the drivetrain components in peak condition is vital. A drive shaft for this specific Audi model must effortlessly cope with the high torque delivered by the 2.0 TDI engine, especially under hard acceleration and heavy loads. We offer robust solutions engineered to withstand the strains of both day-to-day driving and long motorway journeys. Choosing the right spare parts ensures that power transmission remains efficient and vibration-free for many thousands of kilometres to come. Our range includes carefully selected items that guarantee an exact match for your car's original factory specifications, whether you require the left or right-hand side.

What does the drive shaft do on an Audi A4 Avant 2.0 TDI 16V?

The drive shaft plays a pivotal role in the drivetrain of your Audi A4 Avant 2.0 TDI 16V. Its primary task is to transfer rotational power from the gearbox to the front wheels, enabling the vehicle to move forward. Because the front wheels also handle the steering, the drive shaft must cope with constantly shifting angles and suspension movements without losing power. It consists of an axle bar equipped with an inner and an outer CV joint that provides this necessary flexibility. For a diesel engine such as the 2.0 TDI 16V, precision engineering in these components is especially critical to handle the engine's characteristic torque delivery and minimise drivetrain losses. Without a functioning driveshaft, the engine's power cannot reach the road, making it one of the most critical mechanical components in the vehicle.

Common signs of wear

There are several distinct signs indicating that a drive shaft on your Audi A4 Avant is beginning to wear out. One of the most typical symptoms is a clicking or knocking noise heard when making sharp turns, which usually points to a damaged outer CV joint. Vibrations through the steering wheel or car chassis under acceleration can instead signal issues with the inner CV joint or an imbalance in the shaft itself. If you spot grease splattered on the wheel rim or under the car, it is often caused by a split CV boot, which quickly lets dirt in to destroy the constant velocity joint. Ignoring these symptoms can ultimately lead to total failure, leaving you stranded. Regular inspection of the drive shaft boots is the best way to prevent expensive repairs and ensure the driveshaft lasts its intended service life.

How to choose the right drive shaft

Selecting the correct drive shaft for your Audi A4 Avant 2.0 TDI 16V requires close attention. Variations exist depending on gearbox type and production year. The most critical checks are the shaft's overall length, the number of splines at both ends, and whether the vehicle requires an integrated ABS ring on the shaft. To make the process as straightforward and reliable as possible, we always recommend filtering by your car's exact make, model and engine variant. This isolates the 13 exact items compatible with your specific vehicle configuration, eliminating the risk of ordering the wrong part and saving you time during fitting. Measuring the old shaft or counting the teeth can also serve as an effective safeguard if there is any doubt regarding specific chassis numbers.

Related parts to inspect

Be sure to check these related pages for the same vehicle when working on the drive shaft:

When one drivetrain component exhibits wear, adjacent parts on the same car often require attention as well. By comparing these exact pages for the Audi A4 Avant 2.0 TDI 16V, it becomes much easier to determine whether the issue lies in the drive shaft itself or in another connected section of the power transmission.

This is particularly relevant on models where vibrations, play and unusual noises can travel between several parts within the same drivetrain. A quick check of related categories reduces the risk of replacing one correct component while overlooking an adjacent worn part that contributes to the very same fault.

By taking a proactive approach and replacing worn minor parts in good time, you can significantly extend the lifespan of the complete drive shaft. Maintaining a complete overview of your Audi A4 Avant 2.0 TDI 16V drivetrain saves substantial money in the long run.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching high-grade power transmission parts directly across Europe. We understand the importance of receiving the exact part for your Audi A4 Avant 2.0 TDI 16V straight away, which is why we provide a reliable fitment guarantee. Our extensive range offers exceptional depth and premium build quality, catering to virtually every repair requirement. With our dedicated focus on picking the correct part first time and delivering high-quality goods, you can order with absolute confidence. Our expertise covers the entire drivetrain, from complete drive shafts to specialised components like ABS rings and CV boots. Trust an expert team that knows drive shafts and CV joints inside out for the best results and a smooth, trouble-free drive.

Frequently asked questions about drive shafts for Audi A4 Avant 2.0 TDI 16V

How do I find the right drive shaft for my Audi A4 Avant 2.0 TDI 16V?

The easiest way is to select your vehicle make, model and engine variant in our search filter. This will display the 13 parts specifically tailored to your car's engine and gearbox.

What are the most common symptoms of a failing drive shaft?

Common signs include clicking noises when cornering (outer joint), vibrations under acceleration (inner joint) or grease leaking from a damaged CV boot.

Are CV boots and grease included when I buy a complete drive shaft?

Yes, our complete drive shafts are supplied fully assembled with CV boots, CV joints and the correct quantity of grease to make installation straightforward.

Can I replace just the outer CV joint instead of the entire shaft?

Yes, if the shaft bar itself is undamaged, you can often replace just the outer or inner CV joint. We sell these components separately for your Audi A4 Avant.

What does your fitment guarantee mean?

Our fitment guarantee means that if you have selected your car's correct make, model and engine specification and the part still does not fit, we will help you exchange it for the right one without any hassle.

How quickly will my new drive shaft be delivered?

We offer next-day dispatch on most of our stocked drive shafts, meaning you can get your Audi A4 Avant 2.0 TDI 16V back on the road in no time.