Drive shafts for Audi A4 Avant RS4 Quattro

Looking for a high-quality drive shaft for your Audi A4 Avant RS4 Quattro? As driveline specialists, we supply model-specific components engineered to meet the demanding requirements of...

Products for Drive shafts for Audi A4 Avant RS4 Quattro

15 products
1 - 15 of 15
Item no.:3101025
  • Position: Front left, Front right
  • Total length: 465 mm
  • Splines wheel side: 42
Item no.:4105617
  • Position: Rear left
  • Total length: 587 mm
  • Splines wheel side: 42
Item no.:5129721
  • Position: Rear right
  • Total length: 545 mm
  • Splines wheel side: 42
Item no.:1195941
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 616 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:1152364
  • Position: Front left
  • Flange diameter: 123 mm
  • Total length: 595 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:2145438
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 620 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:215230
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 638 mm
  • Splines wheel side: 38
  • ABS teeth: 45
Item no.:613020
  • Position: Rear left, Rear right
  • Flange diameter: 108 mm
  • Total length: 632 mm
  • Splines wheel side: 42
Item no.:118916
  • Total length: 600 mm
  • Splines wheel side: 38
Item no.:617131
  • Total length: 630 mm
  • Splines wheel side: 42
  • ABS teeth: 0
Item no.:618321
  • Total length: 590 mm
  • Splines wheel side: 33
  • ABS teeth: 45
Item no.:3175421
  • Position: Front left, Front right
  • Flange diameter: 123 mm
  • Total length: 458 mm
  • Splines wheel side: 42
Item no.:119952
  • Flange diameter: 124 mm
  • Total length: 595 mm
  • Splines wheel side: 38
Item no.:211765
  • Flange diameter: 124 mm
  • Total length: 615 mm
  • Splines wheel side: 38
Item no.:318551
  • Flange diameter: 123 mm
  • Total length: 465 mm
  • Splines wheel side: 42

Drive shafts for Audi A4 Avant RS4 Quattro

Owning an Audi A4 Avant RS4 Quattro means driving a vehicle with exceptional performance and an advanced four-wheel-drive system. The drive shaft is a vital component in this setup, responsible for transferring enormous power from the engine and gearbox out to the wheels. For an RS model, requirements for material strength and precision are significantly higher than for standard models. With us, you will find drive shafts specifically dimensioned to handle the high torque and stresses of spirited driving. We understand the importance of preserving your car's original handling and safety, which is why we only supply parts with the highest fitting precision. Every component is carefully selected to withstand the demands of the Quattro system, whether for daily driving or more spirited conditions.

What does a drive shaft do on the Audi A4 Avant RS4 Quattro?

The primary task of the drive shaft on an Audi A4 Avant RS4 Quattro is to act as the mechanical link between the differential and the wheel hubs. Because the RS4 model uses the legendary Quattro system, driveshafts work at both the front and rear to distribute power optimally depending on road conditions and driving style. A drive shaft consists of the shaft bar itself along with an inner and an outer CV joint. These joints allow the wheels to move up and down with the suspension and turn with the steering, while power transmission remains smooth and vibration-free. Without fully functioning drive shafts, your car's ability to accelerate and maintain traction would be drastically impaired, making them the heart of your mechanical drivetrain. The precision of these parts is vital for maintaining the sharp driving dynamics the Audi RS series is renowned for.

Common signs of wear

Wear on a drive shaft typically manifests as clear mechanical symptoms that should never be ignored. For an Audi A4 Avant RS4 Quattro, one of the most common signs is a clicking or knocking noise when taking sharp turns, which usually indicates that the outer CV joint is failing. If you instead experience vibrations through the chassis under hard acceleration, this often points to a worn or unbalanced inner CV joint. It is also essential to inspect the CV boots regularly; if a boot splits, lubricating grease escapes and dirt enters, rapidly destroying the constant velocity joint from the inside. Ignoring these symptoms can lead to complete failure, which at worst can damage surrounding drivetrain components or leave you stranded at the roadside. Early detection often saves substantial repair costs.

How to choose the correct drive shaft

Selecting the correct part for a high-performance vehicle requires precision and care. To ensure you receive a component matching the exact specifications of your Audi A4 Avant RS4 Quattro, always filter by your car's make, model and engine in our vehicle selector. Variations exist in length, spline count (teeth) and ABS ring design, all of which are critical for proper fitment. We have made this straightforward by categorising our 15 matching products to suit your car's specific configuration. Using our search filter eliminates the risk of ordering the wrong part, giving you confidence that the component you order is technically identical to the original. This is especially crucial for RS models, where tight tolerances and maximum strength are required to handle the car's substantial power output.

Related parts to check

Be sure to inspect these related parts for the same vehicle when working on the drive shaft:

When a drivetrain component exhibits wear, adjacent parts on the vehicle often require inspection as well. Comparing these exact pages for your Audi A4 Avant RS4 Quattro makes it easier to determine whether the issue lies with the drive shaft itself or another related section of the drivetrain.

This is particularly relevant on performance models where vibrations, play and noises can transfer between interconnected drivetrain components. A quick check across related categories reduces the risk of replacing one correct part while overlooking an adjacent component that causes the same symptom.

Carrying out a thorough inspection of these components ensures your car's drivetrain remains in peak condition for many miles to come.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist with its warehouse in Helsingborg, Sweden, shipping across the EU. We focus exclusively on components such as drive shafts, CV joints and propeller shafts, giving us specialised technical expertise and product depth that general car parts retailers often lack. When you buy for your Audi A4 Avant RS4 Quattro from us, you receive not only a premium spare part, but also the assurance of accurate fitment and dedicated product support. We know you want your car back on the road promptly, so we ship quickly from our Swedish stock. Combining expert knowledge, high-grade parts and an easy vehicle search by make, model and engine, we are the trusted choice for demanding Audi owners who refuse to compromise on quality.

Frequently asked questions about drive shafts for Audi A4 Avant RS4 Quattro

How do I know if the drive shaft fits my Audi A4 Avant RS4 Quattro?

The most reliable way is to select your car's exact make, model and engine variant in our search filter. This ensures you only see the drive shafts that are technically compatible with your specific RS4 model.

What are the most common symptoms of a failing inner CV joint?

A worn inner CV joint typically causes vibrations through the entire vehicle during acceleration. Unlike the outer joint, it rarely produces clicking noises when cornering; the issue is characterised by noticeable imbalance under load.

Can I replace just the CV boot instead of the entire drive shaft?

Yes, if you catch a split or damaged CV boot early before dirt and grit have damaged the constant velocity joint itself, you can replace just the boot. However, if the joint has already started making noises, you will need to replace the joint or the complete shaft.

Why are drive shafts for the RS4 more expensive than for a standard Audi A4?

RS4 models produce significantly higher torque and power output. This requires reinforced materials, larger dimensions, and stricter manufacturing tolerances to withstand the extreme demands placed on the Quattro drivetrain.

Are CV joints included when I buy a complete drive shaft from you?

Yes, our complete drive shafts are supplied fully assembled with both inner and outer CV joints as well as CV boots, ready for direct installation on your vehicle for a straightforward repair.

How quickly can I get my new drive shaft delivered?

We offer fast delivery on all in-stock items across the EU. If you place your order early on a working day, your drive shaft is normally dispatched the same day to keep your vehicle's downtime to a minimum.