Drive shafts for Audi A4 2.0 TDI Quattro

Need a replacement drive shaft for your Audi A4 2.0 TDI Quattro? As driveline specialists, we supply an extensive range of tailored drive shafts engineered to meet the demands of Quattro...

Products for Drive shafts for Audi A4 2.0 TDI Quattro

20 products
1 - 20 of 20
Item no.:3158659
  • Position: Front
  • Splines wheel side: 42
  • Total length: 469 mm
  • Flange diameter: 123 mm
  • Thread size: M16x1.5
Item no.:6179654
  • Position: Rear
  • Splines wheel side: 42
  • Total length: 626 mm
  • Diameter 1: 88 mm
  • Diameter 2: 100 mm
Item no.:4176917
  • Position: Rear left
  • Splines wheel side: 42
  • Total length: 587 mm
Item no.:5108458
  • Position: Rear right
  • Splines wheel side: 42
  • Total length: 545 mm
Item no.:3126957
  • Position: Front
  • Splines wheel side: 42
  • Total length: 465 mm
  • Joint diameter: 101 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:6173031
  • Position: Rear
  • Splines wheel side: 42
  • Total length: 630 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:1174055
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 595 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2141704
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:6135520
  • Position: Rear
  • Splines wheel side: 37
  • Total length: 618 mm
  • Flange diameter: 108 mm
  • ABS teeth: 45
Item no.:3102927
  • Position: Front
  • Splines wheel side: 38
  • Total length: 521 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:312520
  • Position: Front
  • Splines wheel side: 42
  • Total length: 463 mm
  • Joint diameter, gearbox side: 123 mm
  • Flange diameter: 123 mm
Item no.:317128
  • Position: Front left
  • Splines wheel side: 42
  • Total length: 465 mm
  • Joint diameter: 85 mm
  • Joint diameter, gearbox side: 84 mm
Item no.:611258
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 618 mm
  • Joint diameter: 88 mm
  • ABS teeth: 45
Item no.:1141194
  • Position: Front left
  • Splines wheel side: 42
  • Total length: 463 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:1167524
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 596 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2116292
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 618 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2195646
  • Splines wheel side: 38
  • Total length: 620 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:318414
  • Position: Front
  • Splines gearbox side: 42
  • Splines wheel side: 42
  • Total length: 465 mm
  • Joint diameter, gearbox side: 83,6 mm
Item no.:611597
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 626 mm
  • Joint diameter: 94 mm
  • Flange diameter: 100 mm
Item no.:319934
  • Position: Front
  • Splines wheel side: 42
  • Total length: 463 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 123 mm

Drive shafts for Audi A4 2.0 TDI Quattro

The Audi A4 2.0 TDI Quattro represents a sophisticated balance between efficiency and four-wheel-drive capability. Maintaining this balance demands premium-grade components. The drive shaft is the vital link ensuring engine power reaches the tarmac without loss. At CVJoint24, you will find a carefully selected range of drive shafts specifically engineered to handle the torque generated by the 2.0 TDI engine in combination with the Quattro system's demands. With an extensive range in our system, we offer solutions for virtually every variant of this model. Investing in a quality-assured drive shaft is not merely about fixing a fault; it is about restoring the vehicle's original driving dynamics and ensuring the four-wheel-drive system operates just as the engineers in Ingolstadt intended.

What does a drive shaft do on an Audi A4 2.0 TDI Quattro?

In an Audi A4 2.0 TDI Quattro, the role of the drive shaft is more complex than in a front-wheel-drive car. Here, the system must handle power distribution to both the front and rear axles via a centre differential. The drive shafts at each wheel must manage varying torque depending on road conditions and driving style. The inner joints accommodate axial movement as the suspension moves up and down, while the outer CV joints allow the front wheels to steer. For a Quattro model, it is vital that all four drive shafts remain in top condition, as imbalance or play in a single shaft can propagate through the entire drivetrain, causing premature wear to differentials and the gearbox. Understanding this setup highlights why manufacturing precision is so crucial for this specific model.

Common signs of wear

Drive shaft wear often develops gradually, but an attentive Audi A4 2.0 TDI Quattro driver will spot clear warning signs. The classic symptom is a rhythmic clicking noise heard on full steering lock, almost always pointing to a worn outer CV joint. Another frequent symptom is vibration at specific speeds or under heavy acceleration, which often indicates imbalance in the shaft itself or wear in the inner joint near the gearbox. You should also inspect the CV boots regularly. A split boot marks the beginning of the end for any driveshaft, as protective grease escapes while road dirt and moisture penetrate. If you spot grease splattered on the inside of the wheel rim or wheel arch liner, act promptly before the entire shaft fails.

Choosing the right drive shaft

Selecting the correct drive shaft for your Audi A4 2.0 TDI Quattro requires care. Because the model comes in various configurations with different gearboxes – both manual and automatics such as S-tronic – driveshaft specifications vary significantly. Differences include overall shaft length and the spline count on the inner and outer flanges. To ensure a straightforward process, use our search tool by selecting your vehicle's exact make, model and engine. This links directly to detailed vehicle data, matching parts that genuinely fit your car. Before ordering, verify whether you require the left-hand or right-hand side, and whether it is for the front or rear axle, as Quattro vehicles use unique shafts for both positions.

Related components to inspect

Please also check these exact pages for the same car when working on the drive shaft:

When one drivetrain component wears out, related parts on the car often need checking too. Comparing these exact pages for the Audi A4 2.0 TDI Quattro makes it easier to determine whether the issue lies in the drive shaft itself or in an adjacent section of the power transmission.

This is particularly relevant on models where vibrations, play and noises can transfer between multiple components in the drivetrain. A quick check of related categories reduces the risk of replacing the right type of part while overlooking a neighbouring component causing the same symptoms.

Why choose CVJoint24

Why choose CVJoint24 for your Audi A4 2.0 TDI Quattro? The answer lies in our specialisation. Unlike general car parts retailers, we focus exclusively on driveline and power transmission components, giving us specialist expertise and extensive product depth. We know that accurate fitment is everything with drive shafts. That is why we provide a reliable fitment guarantee when you select your vehicle's make, model and engine. Our goal is for you to get the correct part first time, avoiding unnecessary returns. As a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden, we supply parts built to endure demanding European road conditions. With swift delivery and customer support that understands drivetrains inside out, we are your trusted partner for quality and peace of mind. Always the right part, straight to your door.

Frequently asked questions about drive shafts for Audi A4 2.0 TDI Quattro

How do I know if the drive shaft fits my Audi A4 2.0 TDI Quattro?

The most reliable way is to select your car's exact make, model and engine variant in our search filter. This filters out the drive shafts that are technically verified for your specific model and drivetrain.

What are the most common symptoms of a failing drive shaft?

The most common signs are clicking noises when cornering, vibrations during acceleration, and grease splattered across the inside of the wheels caused by torn CV boots.

Is there a difference between front and rear drive shafts on Quattro models?

Yes, the drive shafts differ in both length and mounting between the front and rear axles. Always check the fitting position in the product description.

Can I replace just the CV joint instead of the entire shaft?

Yes, provided the shaft itself is undamaged and straight, you can often save money by simply replacing the inner or outer CV joint.

Do you offer a fitment guarantee on drive shafts?

Yes, we provide a fitment guarantee on all drive shafts when you make your purchase based on your vehicle's correct make, model and engine specifications.

How quickly will the drive shaft be delivered?

We dispatch all in-stock parts promptly from our central warehouse so you can get your Audi A4 2.0 TDI Quattro back on the road as quickly as possible.