Drive shafts for Audi A4 2.0 Tfsi Flexible Fuel Quattro

Looking for a high-quality drive shaft for your Audi A4 2.0 Tfsi Flexible Fuel Quattro? As an international Swedish driveline specialist shipping across the EU, we supply...

Products for Drive shafts for Audi A4 2.0 Tfsi Flexible Fuel Quattro

6 products
1 - 6 of 6
Item no.:3109085
  • Position: Front
  • Flange diameter: 123 mm
  • Total length: 469 mm
  • Splines wheel side: 42
Item no.:4185599
  • Position: Rear left
  • Total length: 587 mm
  • Splines wheel side: 42
Item no.:5184213
  • Position: Rear right
  • Total length: 545 mm
  • Splines wheel side: 42
Item no.:6167088
  • Position: Rear
  • Flange diameter: 100 mm
  • Total length: 630 mm
  • Splines wheel side: 42
Item no.:6155023
  • Position: Rear
  • Flange diameter: 100 mm
  • Total length: 626 mm
  • Splines wheel side: 42
Item no.:319011
  • Flange diameter: 123 mm
  • Total length: 465 mm
  • Splines wheel side: 42

Drive shafts for Audi A4 2.0 Tfsi Flexible Fuel Quattro

Finding the right drive shaft for an Audi A4 2.0 Tfsi Flexible Fuel Quattro requires precision and a clear understanding of the car's advanced four-wheel drive setup. This specific model places high demands on drivetrain components, as the output from the turbocharged engine must be distributed smoothly and effectively to all four wheels. At CVJoint24 you will find a carefully selected range of drive shafts tailored specifically to this configuration. We offer reliable solutions designed to meet or exceed original equipment specifications.

Our drive shafts are engineered to withstand the demanding forces encountered in both everyday city driving and tough road conditions. Because the Quattro system relies on a finely balanced torque split, it is vital that each drive shaft meets exact dimensions and possesses the correct torsional rigidity. Choosing a precision-matched replacement ensures your car's road manners and essential active safety systems—such as electronic stability control and ABS—perform exactly as intended. As your driveline specialists, we help you pick the right part first time.

What does a drive shaft do on an Audi A4 2.0 Tfsi Flexible Fuel Quattro?

The primary task of a drive shaft on an Audi A4 2.0 Tfsi Flexible Fuel Quattro is to transmit torque from the engine and gearbox directly to the road wheels. In an all-wheel-drive vehicle like this, drive shafts are fitted front and rear, providing an efficient and capable transfer of power. Each driveshaft consists of an axle bar equipped with an inner and an outer CV joint, allowing the wheels to move freely with the suspension and turn during steering while transferring power without interruption.

The Flexible Fuel engine delivers a wide torque curve designed for peak efficiency regardless of fuel blend. The drive shaft must absorb these variable torque loads without generating unwanted vibrations or power losses. A drive shaft in peak condition reduces drivetrain friction, helping to maintain fuel economy and a quiet, refined drive. It is a critical link ensuring your Audi performs with the precision and responsiveness it was engineered to deliver.

Common signs of wear

A worn drive shaft typically produces distinct mechanical warning signs. One of the most frequent symptoms is a sharp clicking or knocking sound on full steering lock under acceleration, which usually points to a worn outer CV joint. If you experience vibrations running through the cabin during acceleration—particularly at motorway speeds—the inner constant velocity joint is often the culprit. On an Audi A4 2.0 Tfsi Flexible Fuel Quattro, acting promptly on these symptoms prevents consequential damage to the differentials.

Another clear indicator is grease splattered over the inside of the wheel rim or around the wheel arch. This happens when a CV boot splits, allowing vital lubricating grease to escape and abrasive road grit to enter the joint. Left unaddressed, the lack of lubrication and build-up of dirt will quickly destroy the joint through excessive friction and overheating. Regular checks of your CV boots and drivetrain components remain the most cost-effective way to preserve reliability.

How to choose the correct drive shaft

Choosing the correct replacement drive shaft for your Audi A4 2.0 Tfsi Flexible Fuel Quattro is straightforward when you match your vehicle details. By selecting your car's make, model, engine variant and production year in our shop, you can quickly filter out parts tailored to your specific setup. Be sure to verify the required fitting position before ordering, as drive shafts vary between the front and rear axles as well as between the left and right sides.

In addition to axle position, gearbox type can occasionally affect shaft dimensions, though our vehicle selector accounts for these technical differences. We always recommend fitting complete drive shafts to make installation easier and to guarantee that both the inner and outer CV joints are factory-fresh. With our accurate fitment guarantee, you can rest assured that your new driveshaft will mount seamlessly, saving valuable time and labour at the garage.

Related parts to check

We also recommend checking these specific pages for the same vehicle when working on the drive shaft:

When a drivetrain component shows signs of wear, related parts often require attention too. Comparing these exact pages for the Audi A4 2.0 Tfsi Flexible Fuel Quattro makes it much easier to determine whether an issue stems solely from the drive shaft or from another linked section of the driveline.

This is especially important on four-wheel-drive models, where vibrations, play and mechanical noises can travel along the driveline. A quick look at related categories helps ensure you replace the correct item without overlooking a neighbouring part that contributes to the same problem.

Replacing worn components proactively is the best way to prevent extensive and costly mechanical repairs down the line.

Why shop at CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden. We offer extensive technical expertise and a comprehensive catalogue to supply precision-engineered parts for demanding cars such as the Audi A4 2.0 Tfsi Flexible Fuel Quattro. Our focus remains firmly on manufacturing quality and dependable fitment, backed by our comprehensive fitment guarantee.

When you purchase your spare parts from us, you benefit from our specialist knowledge of driveline engineering. We make it easy to source the correct car parts first time, whether you are a professional workshop technician or a dedicated DIY mechanic. With extensive stock held ready for dispatch and an expert customer support team ready to assist with complex drivetrain questions, CVJoint24 is your trusted partner for premium replacement parts.

Frequently Asked Questions about Drive Shafts for Audi A4 2.0 Tfsi Flexible Fuel Quattro

How do I know which drive shaft fits my Audi A4 2.0 Tfsi Flexible Fuel Quattro?

The simplest and most reliable way is to select your car's exact make, model and engine variant in our search filter. This ensures you only see drive shafts that are technically compatible with your specific vehicle.

What are the most common symptoms of a failing drive shaft?

The most common signs include clicking noises when cornering (outer CV joint), vibrations during acceleration (inner CV joint) and visible grease leaks from damaged CV boots.

Is there a difference between front and rear drive shafts on a Quattro?

Yes, the drive shafts differ in both length and construction depending on whether they fit the front or rear axle. Always check the specified fitting position in the product description.

Are CV joints included when I buy a complete drive shaft?

Yes, when you purchase a complete drive shaft from us, it comes fully assembled with both the inner and outer CV joints as well as CV boots, ready for direct installation.

What does your fitment guarantee mean?

Our fitment guarantee means that if you have selected the correct vehicle model and engine details and the part still does not fit, we will help you exchange it for the right part without any hassle.

How quickly can I get my new drive shaft delivered?

We offer fast delivery on most of our stocked drive shafts, helping you get your Audi A4 back on the road as quickly as possible.