Drive shafts for Audi A4 S4 Quattro

We have gathered a comprehensive selection of drive shafts for the Audi A4 S4 Quattro, covering model years from 1997 onwards. Whether you drive a saloon or a convertible with four-wheel...

Products for Drive shafts for Audi A4 S4 Quattro

30 products
25 - 30 of 30
Item no.:210176
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 638 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:618540
  • Position: Rear
  • Splines wheel side: 42
  • Total length: 630 mm
  • Joint diameter: 98 mm
  • Flange diameter: 108 mm
Item no.:611503
  • Position: Rear
  • Splines wheel side: 33
  • Total length: 590 mm
  • Diameter 1: 89 mm
  • ABS teeth: 45
Item no.:1175780
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 616 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:1119901
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 524 mm
  • Joint diameter: 114 mm
  • ABS teeth: 45
Item no.:317576
  • Position: Front
  • Splines wheel side: 38
  • Total length: 500 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Showing 25–30 of 30 products

Drive shafts for Audi A4 S4 Quattro

Owning an Audi A4 S4 Quattro means driving a high-performance car with an advanced all-wheel-drive system that places substantial demands on every drivetrain component. The drive shaft is a critical part of this system, responsible for transferring torque from the gearbox and differential out to the wheels. For an S4 model, where the loads are often significantly higher than on standard models, robust materials and precision manufacturing are essential. We supply drive shafts that satisfy these rigorous requirements, ensuring power reaches the road without losses or harsh vibrations. By choosing the right parts, you preserve your car's original handling characteristics and minimise the risk of secondary damage to other drivetrain components.

Our range for the Audi A4 S4 Quattro is engineered to cope with everyday driving as well as spirited driving where the Quattro system is truly put to work. Every shaft is balanced and tested to minimise noise levels and maximise service life. When you purchase a drive shaft from us, you receive a product that is ready to install, often complete with pre-fitted joints and boots, making the replacement straightforward.

What does a drive shaft do on the Audi A4 S4 Quattro?

The primary task of the drive shaft on an Audi A4 S4 Quattro is to enable power transfer while allowing the wheels to move vertically with suspension travel and horizontally when steering. Because the S4 Quattro features all-wheel drive, there are drive shafts both front and rear that work together to deliver the optimum traction this model is famous for. These shafts are fitted with CV joints that accommodate the angles occurring during driving, particularly at sharp steering angles or over uneven surfaces.

On a performance car like the S4, engine torque is substantial, which means the driveshaft must be dimensioned to handle rapid acceleration and sustained heavy loads without twisting or failing. A defective drive shaft can lead to total drivetrain failure, making it crucial to appreciate its role as the vital link between engine power and the road surface. By keeping your drive shafts in sound condition, you ensure the four-wheel-drive system operates just as the engineers in Ingolstadt intended.

Common signs of wear

There are several distinct warning signs indicating that a drive shaft on your Audi is becoming worn or has suffered damage. One of the most common symptoms is a clicking or knocking sound heard clearly when cornering sharply at low speeds. This noise often indicates that the outer CV joint has developed play due to wear or lack of lubrication. Vibrations felt through the steering wheel or the car's chassis under acceleration can instead point to an unbalanced shaft or wear in the inner joint, which becomes especially noticeable at higher speeds.

Another telltale sign to look out for is grease splattered across the inside of the wheel rim or around the wheel arch. This is almost invariably caused by a split CV boot, which allows lubricating grease to be flung out while letting dirt in. If not addressed promptly, the constant velocity joint will be ruined within a short period. If you notice the car pulling to one side or feeling unstable under acceleration, it is also advisable to inspect the condition of your drive shafts to rule out mechanical faults.

How to choose the correct drive shaft

Selecting the correct drive shaft for an Audi A4 S4 Quattro demands precision. Knowing the model name alone is not always enough, as specifications can vary depending on the model year, gearbox type (manual or automatic), and whether you require a front or rear axle component. The most reliable way to find the exact match is to select your car's make, model and engine variant in our search filter, which displays the components tailored to your exact vehicle configuration.

Always verify technical specifications such as shaft length and the number of teeth on the ABS ring if your vehicle features an integrated sensor ring on the shaft. By cross-checking these details against your existing component, you prevent costly incorrect purchases and ensure a trouble-free installation without modifications. We also recommend checking whether new bolts or nuts are required, as these are frequently stretch bolts that must be replaced whenever disassembled.

Related parts to inspect

Be sure to check these dedicated pages for the same vehicle when working on the drive shaft:

When a drivetrain component exhibits wear, surrounding parts on the same car often warrant inspection too. By comparing these specific pages for the Audi A4 S4 Quattro, it becomes much easier to determine whether the issue stems from the drive shaft itself or from an adjacent part of the power transmission system.

This is especially true on models where vibrations, play and unusual noises can transfer symptoms across several driveline components. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent part causing the same fault.

Replacing worn CV boots in good time can also save substantial costs by extending the lifespan of your existing CV joints. It is also wise to check the wheel bearings, as these are often removed during drive shaft replacement and may show wear after many kilometres on the road.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline and power transmission specialist. We combine deep technical expertise with an extensive range to provide premium solutions for your Audi. With our fitment guarantee and focus on getting you the right part first time, you can shop with complete peace of mind. We appreciate the importance of getting your car back on the road quickly, which is why we always aim for rapid EU dispatch and high product quality.

By ordering from us, you get access to components tested to withstand demanding conditions and the specific loads generated by a performance model like the Audi A4 S4 Quattro. We consistently offer the right car parts at the right price, supported by customer service experts who genuinely understand drivelines. Whether you are a DIY mechanic or running a professional garage, we are your trusted partner for a reliable vehicle.

Frequently asked questions about drive shafts for Audi A4 S4 Quattro

How do I know if my Audi A4 S4 Quattro needs a new drive shaft?

The most common signs are clicking noises when turning, vibrations under acceleration, or visible damage to the CV boots leading to grease leaks.

Do drive shafts from a standard Audi A4 fit an S4 Quattro?

Usually not. The S4 model typically features heavier-duty dimensions and different specifications to manage the higher torque, so it is essential to choose parts designed specifically for the S4 Quattro.

Are CV joints included when I buy a complete drive shaft?

Yes, our complete drive shafts are supplied with both inner and outer CV joints fitted, including CV boots and grease, ready for immediate installation.

Why does my Audi S4 vibrate under acceleration?

Vibrations under acceleration are often caused by wear in the inner CV joint or an unbalanced drive shaft. On Quattro models, it can also be related to the propeller shaft.

How do I find the exact drive shaft for my model year?

Select your vehicle's make, model, and engine variant in our search filter. This is the most reliable way to find parts tailored specifically to your car's configuration.

Is it difficult to replace a drive shaft on an Audi A4 S4 Quattro yourself?

It requires sound mechanical experience and the correct tools, including sockets for the hub bolt. For an experienced DIY mechanic, it is a manageable job, but strictly observing tightening torques is essential.