Drive shafts for Audi A5 3.2 FSI Quattro

Looking for a premium drive shaft for your Audi A5 3.2 FSI Quattro? At CVJoint24, you will find direct-fit drive shafts specifically built to handle the output of your car's V6 engine...

Products for Drive shafts for Audi A5 3.2 FSI Quattro

8 products
1 - 8 of 8
Item no.:3190269
  • Position: Front
  • Splines wheel side: 42
  • Total length: 469 mm
  • Flange diameter: 123 mm
  • Thread size: M16x1.5
Item no.:6170032
  • Position: Rear
  • Splines wheel side: 42
  • Total length: 630 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:4198518
  • Position: Rear left
  • Splines wheel side: 42
  • Total length: 587 mm
Item no.:5154824
  • Position: Rear right
  • Splines wheel side: 42
  • Total length: 545 mm
Item no.:3116176
  • Position: Front
  • Splines wheel side: 42
  • Total length: 465 mm
  • Joint diameter: 101 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:318120
  • Position: Front
  • Splines wheel side: 42
  • Total length: 463 mm
  • Joint diameter, gearbox side: 123 mm
  • Flange diameter: 123 mm
Item no.:1130253
  • Position: Front left
  • Splines wheel side: 42
  • Total length: 463 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:7305311
  • Position: Rear right
  • Splines wheel side: 42
  • Total length: 547 mm
  • Joint diameter: 100 mm
  • Flange diameter: 108 mm

Drive shafts for Audi A5 3.2 FSI Quattro

The Audi A5 3.2 FSI Quattro combines elegance with performance, and its drivetrain is engineered to transfer the power of the 3.2-litre FSI engine to the road with utmost precision. The drive shaft plays a critical role in this system by transferring torque from the gearbox to the wheels. Because this model features Quattro all-wheel drive, the drive shafts are subjected to distinct stresses, particularly under hard acceleration and during cornering. Choosing the correct replacement spare parts is therefore essential to maintain the vehicle's balance and safety. We supply components that meet or exceed original equipment specifications to guarantee long service life and optimum performance in your Audi.

What does a drive shaft do on an Audi A5 3.2 FSI Quattro?

The drive shaft on an Audi A5 3.2 FSI Quattro is the component that physically connects the vehicle's power source to the driven wheels. In an all-wheel-drive system like Quattro, driveshafts are fitted both front and rear. Their main task is to allow the wheels to move up and down with the suspension and steer while constantly transmitting drive power. Without working drive shafts, engine power would never reach the tarmac, making them one of the most critical elements of the entire drivetrain. For the 3.2 FSI model, the shafts are dimensioned to handle the higher torque compared to smaller engine options, placing rigorous demands on material selection and manufacturing precision.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Audi A5 3.2 FSI Quattro is becoming worn or has failed. One of the most typical signs is a clicking or knocking noise heard when turning sharply, which usually points to a failing outer CV joint. If you instead feel vibrations through the vehicle body during acceleration, it often indicates play or wear in the inner CV joint. Other warning signs include grease splattered over the inside of the alloy wheel or around the wheel arch, caused by a split CV boot. If the boot tears, dirt enters and grease is lost, which quickly leads to complete driveshaft failure if not addressed in good time.

How to choose the correct drive shaft

Selecting the correct drive shaft for an Audi A5 3.2 FSI Quattro requires precision, as variations exist depending on gearbox type and production year. The easiest approach is to select your car's make, model and engine variant in our store selector. This filters out the components engineered to your vehicle's exact specifications. Always verify technical details such as overall shaft length, spline count on both the inner and outer ends, and whether your model relies on specific ABS rings. Checking these parameters ensures a straightforward fitment and seamless operation with your car's driveline systems.

Related components to inspect

Feel free to check these related pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows wear, adjacent parts on the same car often require inspection as well. Comparing these exact category pages for the Audi A5 3.2 FSI Quattro makes it easier to establish whether the fault lies in the drive shaft itself or in a neighbouring section of the drivetrain.

This is especially important on performance models where vibrations, play and noises can travel between several driveline components. Checking related categories reduces the risk of replacing one correct part while overlooking an adjacent component that causes the same symptom.

Taking a proactive approach saves both time and money in the long run by identifying wear before it causes consequential damage.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across Europe from our warehouse in Helsingborg, Sweden. We understand the importance of getting the right part for your Audi A5 3.2 FSI Quattro first time, which is why we provide a dependable fitment guarantee. Our catalogue features exceptional depth and consistent quality, ensuring you receive durable car parts engineered to last. Drawing on our technical expertise in driveline engineering, we offer the guidance you need to order with complete confidence. When you shop with CVJoint24, you can rely on precision parts, expert technical support and fast international delivery across the EU.

Frequently asked questions about drive shafts for Audi A5 3.2 FSI Quattro

How do I know if the drive shaft fits my Audi A5 3.2 FSI Quattro?

The easiest way is to select your car's make, model and engine in our search filter. We have 7 specific items for this model, and our fitment guarantee ensures you receive the correct part.

What are the most common symptoms of a failing drive shaft?

The most common signs are clicking noises when cornering (outer CV joint) or pronounced vibrations through the vehicle during acceleration (inner CV joint).

Do I need to replace both drive shafts at the same time?

No, this is not mandatory, but if one shaft has failed due to general wear and tear, there is a strong likelihood that the other side is also worn.

Are CV boots and fitting accessories included?

Yes, our complete drive shafts are typically supplied with fitted CV boots and the necessary fitting accessories for a straightforward installation.

What is the difference between an inner and an outer CV joint?

The outer joint sits at the wheel and accommodates steering angles, whilst the inner joint sits at the gearbox and absorbs suspension movement.

How quickly will my new drive shaft be delivered?

We offer fast delivery across Europe on most of our stocked products for the Audi A5 3.2 FSI Quattro.