Drive shafts for Audi A6 Avant S6 Quattro

Searching for a high-quality drive shaft for your Audi A6 Avant S6 Quattro? As Swedish driveline specialists, we supply an expertly chosen range designed for this high-performance...

Products for Drive shafts for Audi A6 Avant S6 Quattro

15 products
1 - 15 of 15
Item no.:2100403
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 490 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:3164221
  • Position: Front
  • Splines wheel side: 38
  • Total length: 544 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:3162550
  • Position: Front
  • Splines wheel side: 38
  • Total length: 544 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2180471
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 466 mm
  • Joint diameter: 100 mm
  • Flange diameter: 123 mm
Item no.:3158882
  • Position: Front
  • Splines wheel side: 42
  • Total length: 495 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:6155204
  • Position: Rear
  • Splines wheel side: 42
  • Total length: 660 mm
  • Joint diameter: 99 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:4123822
  • Position: Rear left
  • Splines wheel side: 42
  • Total length: 620 mm
  • Diameter 2: 108 mm
Item no.:5151430
  • Position: Rear right
  • Splines wheel side: 42
  • Total length: 576 mm
Item no.:311566
  • Position: Front
  • Splines wheel side: 42
  • Total length: 490 mm
  • Joint diameter: 104 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:117190
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 545 mm
  • Joint diameter: 106 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:610088
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 650 mm
  • Joint diameter: 88 mm
  • Flange diameter: 108 mm
Item no.:611136
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 653 mm
  • Diameter 1: 88 mm
  • ABS teeth: 45
Item no.:613596
  • Position: Rear
  • Splines wheel side: 38
  • Total length: 654 mm
  • ABS teeth: 45
Item no.:1127456
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 541 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45
Item no.:2140826
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 481 mm
  • Joint diameter: 98 mm
  • ABS teeth: 45

Drive shafts for Audi A6 Avant S6 Quattro

Finding the correct drive shaft for an Audi A6 Avant S6 Quattro demands precision and technical understanding. Known for its potent engine and advanced four-wheel-drive system, this performance estate places exceptionally high demands on every drivetrain component. At CVJoint24, you will find a dedicated range tailored specifically to this car model. We understand how crucial it is that each part matches original equipment specifications to preserve the car's performance and road safety. An incorrect shaft can cause imbalance and damage other parts of the drivetrain, making your choice of supplier vital.

Our selection covers the specific requirements of the S6 variant, where torque levels are significantly higher than in standard models. Consequently, materials and engineering must meet higher standards to withstand the heavy loads generated during hard acceleration and cornering. By focusing on uncompromising quality, we ensure your Audi maintains its signature driving feel and dependable performance over many kilometres to come.

What does a drive shaft do on an Audi A6 Avant S6 Quattro?

The drive shaft on an Audi A6 Avant S6 Quattro carries out the critical job of transferring torque from the gearbox and differentials out to the road wheels. Because the S6 model is equipped with the legendary Quattro all-wheel-drive system, four drive shafts work together to deliver optimum grip and stability across all surfaces. Each shaft must accommodate suspension travel and steering angles while rotating at high speeds. This is made possible by the CV joints at either end of the shaft, which permit angular movement without disrupting power delivery.

Without a sound driveshaft, the car loses its ability to transmit power efficiently, which is especially noticeable in a high-performance vehicle like the Audi A6 Avant S6 Quattro. Power must be distributed evenly for the car's stability control and all-wheel-drive systems to function as intended. A defective shaft can also cause premature wear on the differential and gearbox, making it one of the most vital components in the mechanical heart of your car. Understanding its role highlights why replacing it at the first sign of trouble is essential.

Common signs of wear

There are several telltale signs that a drive shaft is failing on your Audi. One of the most frequent symptoms is a clicking or knocking noise on tight turns, typically pointing to wear in the outer CV joint. If the noise is instead a dull clonk or thud during acceleration, the inner joint is often the culprit. Vibrations felt through the steering wheel or chassis at speed also strongly indicate imbalance or mechanical play within the shaft, requiring prompt inspection to prevent secondary damage.

Another critical warning sign is grease splattered across the inside of the wheel rim or wheel arch. This is usually caused by a torn CV boot. When the boot splits, lubricating grease escapes while road dirt and water penetrate the joint. This accelerates wear dramatically and can lead to total shaft failure in a very short time. For a performance car like the S6 Quattro, paying close attention to these symptoms is paramount, as high power outputs quickly turn minor faults into costly repairs.

How to choose the correct drive shaft

To choose the right part for your Audi A6 Avant S6 Quattro, select your car's exact make, model and engine variant in our vehicle selector. Drive shafts differ between the front and rear axles, as well as between the left-hand and right-hand sides. Furthermore, technical specifications can vary between different production runs of the S6 Quattro depending on equipment levels and build date. Selecting your exact vehicle filters the catalogue down to parts guaranteed to fit your specific configuration, eliminating the risk of incorrect orders.

When evaluating the options, verify the shaft's overall length and the spline tooth counts at both ends. Although our database does the heavy lifting, comparing these dimensions against your removed shaft is always good practice. We recommend fitting complete drive shafts to ensure both the inner and outer constant velocity joints are factory fresh, providing the longest service life and best overall value for your Audi.

Related parts to inspect

Please also check these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, nearby parts on the same car often require attention as well. Checking these exact pages for the Audi A6 Avant S6 Quattro makes it easier to confirm whether an issue stems from the drive shaft itself or another related transmission part.

This is especially important on performance models where vibrations, play and unwanted noises can transfer symptoms across multiple driveline sections. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjoining component that contributes to the very same issue.

Proactively replacing worn CV joint boots or inspecting ABS reluctor rings can frequently save you from costlier repairs down the road. A comprehensive review of the drivetrain guarantees that your S6 puts its power down safely and efficiently.

Why buy from CVJoint24?

CVJoint24 is your dedicated partner for Audi driveline components. As an international shop backed by Swedish driveline specialists with a central warehouse in Helsingborg, Sweden, we offer an extensive range alongside specialist technical knowledge. We focus strictly on OE quality and accurate fitment, underpinned by our reliable fitment guarantee. When you order from us, you can trust that our spare parts are tested to handle tough European driving conditions and the demanding requirements of an Audi A6 Avant S6 Quattro.

With prompt dispatch across the EU directly from our Swedish warehouse and customer support that understands the technical challenges of four-wheel-drive platforms, you can order with confidence. We aim to supply the best solutions for your transmission, whether you are a DIY mechanic or a professional garage. Getting the right part first time is our priority, ensuring your shopping experience is straightforward and dependable.

Frequently asked questions about drive shafts for Audi A6 Avant S6 Quattro

How do I know if the drive shaft fits my Audi A6 Avant S6 Quattro?

The most reliable way is to select your car's make, model and engine variant in our search filter. This narrows our range of 17 items down to those specifically tailored to your vehicle's configuration and chassis number.

What are the most common symptoms of a failing drive shaft?

The most frequent signs include clicking noises when cornering (outer joint), vibrations under acceleration (inner joint or imbalance), and visible grease leaks from damaged CV boots.

Can I replace just the CV joint instead of the entire shaft?

Yes, if the shaft bar itself is undamaged, you can often replace just the inner or outer CV joint. However, in cases of severe wear or corrosion, a complete drive shaft can be a more cost-effective and durable solution.

Is there a difference between the right and left drive shaft on an S6 Quattro?

Yes, on most Audi models with Quattro all-wheel drive, the right and left sides differ in length and sometimes in their mountings. Always check the specifications for the side you intend to replace.

How does the Quattro system affect the choice of drive shaft?

All-wheel drive means the car has drive shafts at both the front and the rear. Because of its high power output, the S6 Quattro has demanding strength requirements, making it crucial to select parts engineered specifically for this variant.

What is included when I buy a complete drive shaft from you?

When you purchase a complete drive shaft, it arrives fully assembled with inner and outer CV joints, CV boots, grease, and all necessary mounting hardware such as bolts or nuts, ready for immediate installation.