Drive shafts for Audi A7 Sportback S7 Quattro

Looking for a high-quality drive shaft for your Audi A7 Sportback S7 Quattro? As a Swedish driveline specialist, we supply a carefully chosen range for your performance vehicle. To...

Products for Drive shafts for Audi A7 Sportback S7 Quattro

7 products
1 - 7 of 7
Item no.:3170046
  • Position: Front
  • Splines wheel side: 42
  • Total length: 495 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:6175775
  • Position: Rear
  • Splines wheel side: 42
  • Total length: 660 mm
  • Joint diameter: 99 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:4184341
  • Position: Rear left
  • Splines wheel side: 42
  • Total length: 620 mm
  • Diameter 2: 108 mm
Item no.:5172256
  • Position: Rear right
  • Splines wheel side: 42
  • Total length: 576 mm
Item no.:5175086
  • Position: Rear right
  • Splines wheel side: 36
  • Total length: 631 mm
  • Diameter 2: 100 mm
  • Flange diameter: 100 mm
Item no.:117608
  • Position: Front
  • Splines wheel side: 42
  • Total length: 486 mm
Item no.:311092
  • Position: Front
  • Splines wheel side: 42
  • Total length: 490 mm
  • Joint diameter: 104 mm
  • Joint diameter, gearbox side: 123 mm

Drive shafts for Audi A7 Sportback S7 Quattro

The Audi A7 Sportback S7 Quattro is a car that combines luxury with extreme performance and an advanced all-wheel-drive system. The drive shaft plays a pivotal role in managing the powerful engine's torque and distributing it efficiently to the wheels. With us, you will find drive shafts specifically engineered to satisfy the high demands placed on an S7 model. Replacing a worn drive shaft is not merely a matter of comfort, but also of safety and preserving the car's dynamic handling characteristics. We understand the importance of precision when it comes to components for the Audi A7 Sportback S7 Quattro, where every part must endure substantial loads during both everyday driving and spirited runs.

What does a drive shaft do on the Audi A7 Sportback S7 Quattro?

The drive shaft on an Audi A7 Sportback S7 Quattro is a critical link in the vehicle's powertrain. Its primary task is to transfer rotational energy from the gearbox and differential directly to the wheel hubs. Because the S7 is equipped with the legendary Quattro system, multiple shafts work together to deliver maximum traction and acceleration in all weather conditions. The drive shaft must be able to handle significant angle variations during steering and suspension movements, all whilst rotating at very high speeds. A defective or unbalanced shaft can prevent power from reaching the road efficiently, directly impairing the car's performance, stability and fuel efficiency.

Common signs of wear

There are several distinct signs that a driveshaft on your Audi is beginning to fail. One of the most common symptoms is a clicking or knocking noise heard during sharp turns at low speeds, which often indicates that an outer CV joint is worn. If you instead experience vibrations through the steering wheel or chassis under hard acceleration, it may point to problems with an inner CV joint. It is also essential to inspect the CV boots regularly; if they split, lubricating grease escapes and dirt enters, quickly destroying the shaft's moving parts and leading to total failure if not addressed promptly.

How to choose the correct drive shaft

Choosing the correct component for a high-performance vehicle demands care and technical verification. For the Audi A7 Sportback S7 Quattro, various versions exist depending on the exact model year and gearbox type. We always recommend selecting your car's make, model and engine to filter out parts verified for your specific vehicle. Always verify the shaft's total length and the spline tooth count on both the inner and outer ends before commencing installation. With our tailored range for this specific model, we make it simple to find the correct specification without guesswork, saving you both time and money on your repair.

Related parts to check

Be sure to check these exact pages for the same vehicle when working on the drive shaft:

When a drivetrain component shows signs of wear, neighbouring parts on the same car often warrant inspection too. By comparing these exact pages for the Audi A7 Sportback S7 Quattro, it becomes easier to identify whether an issue lies with the drive shaft itself or with another adjoining part of the power transmission system.

This is particularly relevant on models where vibrations, play and unwanted noises can shift symptoms across several parts in the same drivetrain. A quick check of related categories reduces the risk of replacing the right type of part whilst overlooking an adjacent component that affects the very same fault.

Why shop with CVJoint24

CVJoint24 is your dedicated partner for drivetrains and power transmission for German premium vehicles. As a Swedish driveline specialist, we offer not only premium-quality car parts, but also the technical expertise needed to give you total confidence in your purchase. We provide a precise fitment guarantee and fast deliveries across the EU from our Swedish central warehouse, helping your Audi A7 Sportback S7 Quattro return to the road promptly at peak performance. Our dedication to supplying the correct spare parts straight away, paired with an extensive inventory, makes us the natural choice for car enthusiasts and professional garages requiring exacting precision and durability.

Frequently asked questions about drive shafts for Audi A7 Sportback S7 Quattro

How do I know if the drive shaft fits my Audi A7 Sportback S7 Quattro?

The most reliable method is to select your car's make, model and engine variant in our search filter. This narrows our range down so you only see the 7 compatible products for your specific vehicle.

What are the most common symptoms of a failing drive shaft on an S7?

The most common signs are clicking noises when turning (outer joint) or vibrations through the car under acceleration (inner joint). Grease splatters on the inside of the wheel can also indicate a split CV boot.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft bar itself is undamaged, you can often replace only the inner or outer CV joint. We supply both complete shafts and separate joints to offer you the most cost-effective solution.

Are CV boots and grease included when I buy a drive shaft from you?

Yes, our complete drive shafts are supplied fully assembled with CV boots, high-quality grease and the necessary mounting hardware to make replacement quick and straightforward.

Why is the correct number of splines on the drive shaft so important?

Splines are the teeth that lock the shaft into the gearbox and wheel hub. If the spline count does not match precisely, the shaft will not fit or could cause severe damage to other drivetrain components.

How quickly can I get my new drive shaft delivered?

We dispatch all stocked items rapidly from our central warehouse. As Swedish driveline specialists, we operate an efficient logistics process across the EU to minimise your car's downtime.