Drive shafts for Audi Q3

Looking for a replacement Audi Q3 drive shaft? As a dedicated Swedish driveline specialist, we supply an extensive range tailored specifically to your vehicle. Whether you drive a...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for Audi Q3

105 products
1 - 24 of 105
Item no.:1121552
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 36
  • Total length: 563 mm
  • Joint diameter: 98 mm
Item no.:2151793
  • Position: Front right
  • Splines gearbox side: 40
  • Splines wheel side: 36
  • Total length: 610 mm
  • Joint diameter: 98 mm
Item no.:2152779
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 910 mm
  • Joint diameter: 98 mm
Item no.:1111579
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 495 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:7308214
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 600 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1174778
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 562 mm
  • Joint diameter: 98 mm
Item no.:2192623
  • Position: Front right
  • Splines gearbox side: 40
  • Splines wheel side: 36
  • Total length: 590 mm
  • Joint diameter: 98 mm
Item no.:7317405
  • Position: Front left
  • Splines gearbox side: 40
  • Splines wheel side: 36
  • Total length: 500 mm
  • Joint diameter: 98 mm
Item no.:2149271
  • Position: Front right
  • Splines gearbox side: 40
  • Splines wheel side: 36
  • Total length: 625 mm
Item no.:2123468
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 806 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1178933
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 570 mm
  • Diameter 1: 100 mm
Item no.:2199513
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 36
  • Total length: 925 mm
  • Joint diameter: 100 mm
Item no.:5199771
  • Position: Rear right
  • Splines wheel side: 36
  • Inner splines: 33
  • Total length: 650 mm
  • Diameter 1: 83 mm
Item no.:4114985
  • Position: Rear left
  • Splines wheel side: 36
  • Total length: 594 mm
  • Diameter 2: 100 mm
  • Flange diameter: 100 mm
Item no.:5145691
  • Position: Rear right
  • Splines wheel side: 36
  • Total length: 631 mm
  • Diameter 2: 100 mm
  • Flange diameter: 100 mm
Item no.:1100946
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 470 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 119 mm
Item no.:2180300
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 754 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 119 mm
Item no.:1162816
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 525 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:2110945
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 795 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:2107778
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 586 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 123 mm
Item no.:2161256
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 615 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:310138
  • Position: Front
  • Splines wheel side: 36
  • Total length: 480 mm
  • Joint diameter: 110 mm
  • ABS teeth: 28
Item no.:2117092
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 589 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 119 mm
Item no.:411341
  • Position: Rear left
  • Splines wheel side: 36
  • Total length: 606 mm
  • Diameter 2: 94 mm
Showing 1–24 of 105 products

Drive shafts for Audi Q3

The Audi Q3 is a popular SUV that demands robust components to handle both city driving and harsher surfaces. The drive shaft is a critical link in the vehicle's power transmission, and here at CVJoint24 you will find a comprehensive range tailored specifically for this model. With 113 precisely matched parts, we cover everything from the earliest model years through to the latest iterations, including Sportback variants. Choosing the correct drive shaft is not merely about keeping the car rolling; it is about preserving the driving dynamics and safety for which Audi is renowned. Our selection is carefully chosen to meet or exceed original specifications, providing a dependable, long-term solution for your vehicle. We understand the importance of precision, especially for cars equipped with advanced drivetrains such as quattro, where every component must work in perfect harmony to avoid unnecessary wear on differentials and the gearbox. By focusing on high-grade materials and exact manufacturing tolerances, we ensure that our drive shafts endure the demands that European road conditions and shifting climates place on an Audi Q3.

What does a drive shaft do on an Audi Q3?

The primary task of a drive shaft on an Audi Q3 is to transfer torque from the gearbox or differential directly to the driven wheels. This enables the car to move forward or in reverse. On front-wheel-drive Q3 models, the front drive shafts are fitted between the gearbox and the front wheel hubs, whilst quattro versions also feature rear driveshafts that receive power via a propeller shaft and a rear differential. The drive shaft must accommodate significant angular changes as the suspension travels up and down and as the vehicle steers. This movement is made possible by the CV joints fitted at each end of the shaft. For an Audi Q3, which is frequently driven as a versatile family car, these components are subjected to substantial loads during acceleration and cornering. A properly functioning drive shaft delivers smooth, vibration-free power, which is essential for ride comfort and even tyre wear. Without an intact drive shaft, the vehicle loses effective drive, which can lead to a complete breakdown if a shaft snaps. It is therefore one of the most critical mechanical components in the entire drivetrain.

Common signs of wear

There are several distinct warning signs that indicate a drive shaft on your Audi Q3 is worn or damaged. One of the most typical symptoms is vibration felt through the steering wheel or car body under acceleration. This is often caused by an unbalanced shaft or excessive play in the inner CV joint. Another classic telltale is a clicking or knocking noise when taking sharp turns at low speeds, which usually points to a failing outer CV joint. You should also routinely inspect the CV boots; if a boot splits, grease escapes and road dirt penetrates, quickly destroying the constant velocity joint and ultimately the entire driveshaft assembly. If you notice the car pulling to one side or hear unusual noises when changing speed, it is high time to check the drivetrain. For Audi Q3 owners, staying alert to these signs is especially vital because these vehicles tackle diverse driving conditions where gravel, road salt and moisture can accelerate the degradation of protective rubber boots. Ignoring early symptoms can lead to far more expensive repairs if neighbouring driveline components become damaged.

How to choose the correct drive shaft

Navigating the various options might seem daunting, but selecting the right part is straightforward when you filter by vehicle specification. The Audi Q3 is available in numerous configurations, and factors such as engine type, gearbox (manual or S tronic) and drivetrain (front-wheel drive or quattro) dictate which drive shaft will fit. Notable variations include overall shaft length, the number of splines (teeth) on the stubs, and compatibility with specific ABS setups. Always determine whether you require the left-hand (nearside) or right-hand (offside) shaft, as they are rarely identical on Audi models. By selecting your car's make, model and engine, you can quickly filter for parts that match your vehicle's exact technical requirements. This eliminates guesswork and ensures an exact fit. We also advise checking whether replacement hub bolts or nuts are required during installation, as modern vehicles frequently employ single-use stretch bolts to achieve the correct torque setting and safeguard the wheel assembly. Choosing a shaft built to the correct specification is essential to prevent unwanted vibrations and future mechanical trouble.

Related parts to inspect

We recommend checking these exact pages for the same vehicle when working on the drive shaft:

When a driveline component shows signs of wear, related parts on the same vehicle should often be checked as well. By comparing these dedicated pages for the Audi Q3, it becomes much easier to determine whether an issue lies with the drive shaft itself or with another component in the drivetrain.

This is particularly useful on models where vibrations, play and unusual noises can transmit symptoms across several interconnected assemblies. A quick check of related categories reduces the risk of replacing one correct part while overlooking an adjacent component that contributes to the same problem.

Replacing a split CV boot in good time can save you hundreds of pounds by preventing full drive shaft failure. Take time to inspect the wheel bearings and ABS rings as well, as these operate in direct contact with the outer end of the shaft. Taking a thorough approach to maintaining your Audi Q3 prolongs component life, preserves resale value and keeps the car driving at its best.

Why buy from CVJoint24?

CVJoint24 is your dedicated specialist for driveline and power transmission components. As a Swedish driveline specialist shipping throughout the European Union, we focus exclusively on this area, giving us technical depth that general car-parts suppliers often lack. We combine dependable component quality with fitment confidence, making it simple to find parts that fit your Audi Q3 when you select your vehicle's make, model and engine. With extensive stock ready in our Helsingborg warehouse, we dispatch orders promptly across Europe, which is vital when a vehicle is on the ramp waiting for parts. Our priority is to help you select the correct part the first time, avoiding inconvenient returns and confusion over technical specifications. We carefully vet our suppliers to ensure every drive shaft meets stringent standards for modern premium cars. When you choose CVJoint24, you receive high-grade spare parts supported by genuine driveline expertise and helpful customer support for total peace of mind.

Frequently asked questions about drive shafts for Audi Q3

How do I know which drive shaft fits my Audi Q3?

The easiest and most reliable way is to filter by your car's make, model and engine variant in our store. This filters our range of 113 items down to those that precisely match your car's chassis, engine type and gearbox.

Is there a difference between drive shafts for Audi Q3 with front-wheel drive and quattro?

Yes, there is a significant difference. Quattro models have drive shafts both at the front and rear, and the front shafts often differ in length and mounting compared to front-wheel-drive models. Always select your exact model and engine to get the correct version.

What are the most common symptoms of a failing drive shaft on an Audi Q3?

The most common signs are vibrations under acceleration, clicking noises when cornering sharply, or grease splatters visible on the inside of the wheel rim, which indicates a split CV boot.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, in many cases you can replace just the outer or inner CV joint if the shaft itself is undamaged. We sell both complete drive shafts and individual joints for Audi Q3.

Are CV boots and fitting accessories included when I buy a complete drive shaft?

Yes, when you purchase a complete drive shaft from us, it comes fully assembled with CV boots, grease and, in most cases, the necessary mounting bolts or nuts.

How quickly can my new drive shaft be dispatched?

We aim to offer prompt dispatch on all in-stock products. If you order early on a working day, your drive shaft is normally dispatched the very same day.