Drive shafts for Audi Q3 Sportback

Looking for a premium-quality drive shaft for your Audi Q3 Sportback? As a Swedish driveline specialist, we supply a carefully chosen range of drive shafts tailored to your vehicle's...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for Audi Q3 Sportback

30 products
1 - 24 of 30
Item no.:1108109
  • Position: Front left
  • Total length: 570 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:2166558
  • Position: Front right
  • Total length: 925 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:1182076
  • Position: Front left
  • Total length: 562 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:1111694
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 481 mm
  • Splines wheel side: 36
Item no.:2116664
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 772 mm
  • Splines wheel side: 36
Item no.:2122143
  • Position: Front right
  • Total length: 910 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:1161784
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 523 mm
  • Splines wheel side: 36
Item no.:2157146
  • Position: Front right
  • Flange diameter: 119 mm
  • Total length: 586 mm
  • Splines wheel side: 36
Item no.:5181710
  • Position: Rear right
  • Flange diameter: 94 mm
  • Total length: 650 mm
  • Splines wheel side: 36
Item no.:2191425
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 615 mm
  • Splines wheel side: 36
Item no.:212011
  • Position: Front right
  • Total length: 590 mm
  • Splines gearbox side: 40
  • Splines wheel side: 36
Item no.:310072
  • Position: Front left
  • Flange diameter: 108 mm
  • Joint diameter: 108 mm
  • Total length: 495 mm
  • Splines wheel side: 36
Item no.:213954
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 806 mm
  • Splines wheel side: 36
Item no.:1173709
  • Position: Front left
  • Total length: 570 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:2146439
  • Position: Front right
  • Total length: 925 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:1159962
  • Position: Front left
  • Total length: 562 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:1103837
  • Position: Front left
  • Flange diameter: 119 mm
  • Total length: 481 mm
  • Splines wheel side: 36
Item no.:1110758
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 500 mm
  • Splines wheel side: 36
Item no.:218795
  • Flange diameter: 119 mm
  • Total length: 590 mm
  • Splines wheel side: 36
Item no.:213764
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 601 mm
  • Splines wheel side: 36
Item no.:310978
  • Position: Front left
  • Flange diameter: 108 mm
  • Joint diameter: 108 mm
  • Total length: 495 mm
  • Splines wheel side: 36
Item no.:210111
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 806 mm
  • Splines wheel side: 36
Item no.:1119417
  • Position: Front left
  • Total length: 557 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:213413
  • Flange diameter: 119 mm
  • Total length: 590 mm
  • Splines wheel side: 36
Showing 1–24 of 30 products

Drive shafts for Audi Q3 Sportback

The Audi Q3 Sportback is a car that unites the practical qualities of an SUV with a sporty coupé silhouette, placing unique demands on its mechanical components. The drive shaft is one of the most vital components in the vehicle's powertrain and is responsible for transmitting engine torque to the wheels with minimal loss. For a car in this segment, it is crucial that drive shafts are manufactured with high precision to withstand both everyday city driving and demanding motorway journeys. At CVJoint24, we offer tailored drive shafts developed specifically to satisfy the technical requirements of the Audi Q3 Sportback. Choosing the correct parts ensures that your vehicle's handling remains flawless and that wear on other drivetrain components is kept to a minimum. Our range covers a wide selection of engine variants, allowing us to supply solutions for virtually every version of this popular model.

What does a drive shaft do on the Audi Q3 Sportback?

The primary role of the drive shaft on an Audi Q3 Sportback is to act as the link between the gearbox and the wheel hubs. It delivers the torque generated by the engine, which in turn sets the wheels in motion. On a modern vehicle like the Q3 Sportback, the drive shaft features two CV joints – an inner and an outer joint – which allow the shaft to change angles while rotating. This is essential for enabling the wheels to move up and down with the suspension and, on the front axle, to turn with the steering. On models equipped with quattro all-wheel drive, the drive shafts perform an even more intricate job, synchronising power across all four wheels for maximum traction. A properly functioning drive shaft delivers smooth, vibration-free running, which is fundamental to the premium driving experience expected of an Audi.

Common signs of wear

Several clear symptoms indicate that a drive shaft on your Audi Q3 Sportback may need replacing. One of the most typical signs is a clicking or knocking noise when taking tight turns at low speeds, which usually points to a worn outer CV joint. If you experience vibrations through the cabin or bodywork under acceleration, it may suggest play in the inner constant velocity joint or an unbalanced shaft. Another warning sign is grease splattered over the inside of the wheel rim or inside the wheel arch; this is commonly caused by a split CV boot that has allowed lubricant to escape. Without grease, dirt and moisture quickly destroy the joint. Ignoring these symptoms can ultimately lead to total failure and leave you stranded at the roadside, so prompt diagnosis is always recommended to avoid costly secondary damage.

How to choose the correct drive shaft

Finding the right drive shaft for your Audi Q3 Sportback requires careful consideration of several technical specifications. Because this model is available with various engines – from the 35 TFSI to more powerful variants – as well as front-wheel drive and quattro, shaft specifications differ. Length, diameter and the number of splines on the shaft ends must match exactly to ensure a proper fit. The simplest and most reliable way to navigate our catalogue of 30 items is to filter by your car's make, model and engine. Selecting your exact specification displays the car parts guaranteed to fit your car. It is also important to verify whether you need to replace the left or right driveshaft, as they frequently differ in length. With our specialist expertise, we help you choose the right part straight away, saving you time and preventing installation issues.

Related parts to check

Feel free to check these matching pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, neighbouring parts on the same car often require inspection as well. Comparing these exact pages for the Audi Q3 Sportback makes it easier to tell whether the issue lies with the drive shaft itself or another related part of the drivetrain.

This is especially important on models where vibrations, play and unusual noises can travel between several driveline components. Checking related categories quickly reduces the risk of replacing one correct part while overlooking an adjacent component that contributes to the same problem.

By taking a proactive approach and renewing worn small parts at the same time, you can prevent future breakdowns and ensure your vehicle's driveline runs smoothly for many thousands of kilometres to come.

Why buy from CVJoint24?

CVJoint24 is not just another general car parts retailer; we are a Swedish driveline specialist dedicated to drivetrain and power transmission components, shipping across the EU from our warehouse in Helsingborg. Our deep technical focus allows us to provide in-depth expertise and an inventory that wider spare parts shops rarely match. When you order a drive shaft for your Audi Q3 Sportback from us, you can depend on receiving a high-quality product engineered for an exact fit. We back our products with a dependable fitment guarantee, and our customer support team has the technical know-how to assist you every step of the way. With prompt deliveries and a commitment to getting the right part to your door, we are the trusted choice for discerning motorists. We make buying replacement parts straightforward and dependable, so you can get back to enjoying your Audi on the road.

Frequently Asked Questions about Drive Shafts for Audi Q3 Sportback

How do I know if a drive shaft on my Audi Q3 Sportback is failing?

The most common signs of wear are clicking noises when cornering, vibrations under acceleration, or visible grease leaks from split CV boots.

How do I find the correct drive shaft for my car?

Simply select your Audi Q3 Sportback model, year and engine variant to filter out the exact drive shafts that fit your car.

Is there a difference between drive shafts for front-wheel drive and quattro models?

Yes, lengths and specifications often differ, and quattro models also have drive shafts on both the front and rear axles.

What happens if I continue driving with a damaged drive shaft?

A damaged drive shaft can eventually fail completely, causing your car to lose drive entirely and potentially damaging other suspension components.

Does the drive shaft include the CV joints as well?

Yes, our complete drive shafts are supplied with both inner and outer CV joints as well as CV boots, fully assembled and ready for installation.

What warranty do you offer on your drive shafts?

We provide a reliable fitment guarantee and only supply high-quality components designed to withstand tough European driving conditions.

How quickly can my new drive shaft be delivered?

We offer fast delivery across the EU on all in-stock parts, helping you get your Audi Q3 Sportback back on the road without delay.