Drive shafts for BMW 3 Serie 325 D E91

In need of a replacement drive shaft for your BMW 3 Serie 325 D E91? As a dedicated Swedish driveline specialist, we supply an extensive range of high-quality drive shafts engineered...

Products for Drive shafts for BMW 3 Serie 325 D E91

6 products
1 - 6 of 6
Item no.:6119617
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 651 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1125055
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 598 mm
  • Joint diameter: 94 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:4135892
  • Position: Rear left
  • Splines wheel side: 30
  • Total length: 617 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:5197063
  • Position: Rear right
  • Splines wheel side: 30
  • Total length: 680 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:610841
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 657 mm
  • Flange diameter: 108 mm
  • ABS teeth: 48
Item no.:311321
  • Splines wheel side: 25
  • Total length: 26 mm
  • Thread size: M27x1.5

Drive shafts for BMW 3 Serie 325 D E91

Maintaining the drivetrain on a BMW 3 Serie 325 D E91 is essential to preserve the driving dynamics and stability that the marque is renowned for. The E91 generation, particularly the 325 D model, demands components capable of coping with the substantial torque delivered by the diesel engine to the rear wheels. A drive shaft is a vital link in this setup, and when it begins to show signs of wear, it is crucial to act promptly to prevent secondary damage to other drivetrain components. With us, you will find vehicle-specific solutions engineered to satisfy the technical requirements of your car. We understand that BMW owners expect exceptional precision, which is why our drive shafts are rigorously selected to match original equipment specifications for both strength and dynamic balance.

What does a drive shaft do on a BMW 3 Serie 325 D E91?

The primary role of the drive shaft on your BMW 3 Serie 325 D E91 is to transfer rotational torque from the differential out to the road wheels. Because the 325 D E91 is rear-wheel drive, these shafts are fitted on the rear axle. They must not only transmit driving force but also accommodate suspension travel without binding or causing vibration. A properly functioning drive shaft ensures that power is delivered to the tarmac smoothly and efficiently, which is critical for clean acceleration and cornering poise. Within the driveshaft, constant velocity joints allow for angle variations as the suspension moves over bumps and uneven surfaces. Without an intact drive shaft, the car cannot propel itself forward, and in extreme cases, a failure could cause the wheel to lock or inflict severe damage on the surrounding suspension.

Common symptoms of wear

Several tell-tale signs indicate that a drive shaft on your BMW 3 Serie 325 D E91 is reaching the end of its service life. One of the most frequent symptoms is a noticeable vibration through the body shell under acceleration, especially at motorway speeds. This is typically caused by wear and play inside the inner CV joint. If you notice clicking or knocking noises during sharp turns, the outer CV joint is the more likely culprit. Other warning signs include clunking sounds when coming off the throttle or visible damage to the CV boots. If a CV boot splits, lubricating grease escapes whilst moisture and road dirt penetrate inside, rapidly destroying the internal components through friction and corrosion. Ignoring these warnings can lead to complete failure whilst driving, posing a genuine safety hazard and resulting in costly repairs.

How to choose the correct drive shaft

To choose the correct drive shaft for your BMW 3 Serie 325 D E91, simply select your car's make, model and engine variant in our shop catalogue. Drive shafts can vary depending on gearbox type and exact production month, even within the same generation. By choosing your specific model details, our catalogue filters the car parts that accurately match your vehicle's factory specifications. Be sure to confirm whether you require the left-hand or right-hand side, as they often differ in length. It is also wise to check the spline count on the shaft ends when performing a manual inspection. Thanks to our accurate fitment guarantee, you can rest assured you are receiving a spare part that is technically identical to the original, making installation straightforward so you can focus on the job at hand.

Related parts to inspect

Be sure to check these dedicated pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, neighbouring parts on the vehicle often warrant a thorough inspection too. By checking these exact category pages for the BMW 3 Serie 325 D E91, it becomes much easier to determine whether an issue lies purely within the drive shaft or in an adjacent part of the drivetrain.

This is especially pertinent on vehicles where vibrations, mechanical play and unusual noises can transmit across multiple drivetrain sections. Checking related categories minimises the risk of replacing one component while missing an adjoining part that contributes to the very same problem.

Why buy from cvjoint24.com?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying customers across the EU from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with an extensive range tailored specifically for marques like BMW. When you order from us, you receive high-quality car parts backed by our reliable fitment guarantee. We understand how important it is to obtain the right part the first time to minimise downtime for your BMW 3 Serie 325 D E91. With prompt dispatch and an uncompromised commitment to quality, we ensure your drivetrain performs reliably for many miles ahead. Our customer service team consists of experts ready to assist you throughout the ordering process. Choose a specialist that understands your vehicle inside out – choose cvjoint24.com for a dependable and hassle-free purchase.

Frequently asked questions about drive shafts for BMW 3 Serie 325 D E91

How do I know if the drive shaft fits my BMW 325 D E91?

The easiest and most reliable method is to select your BMW 3 Serie 325 D E91 by make, model and engine variant in our vehicle selector. This filters our range to display only the drive shafts that are technically compatible with your specific car.

What are the most common symptoms of a worn drive shaft?

The most typical warning signs include vibrations under acceleration, clicking noises when turning, or a knocking sound when lifting off the throttle. Leaking grease from a damaged CV boot is also a clear indication that the shaft requires inspection.

Are CV boots and fitting accessories included when I buy a drive shaft?

Yes, our complete drive shafts are supplied with pre-fitted CV boots, joints and the necessary grease. In most cases, the required bolts or nuts for installation on your BMW are also included.

Can I replace only the outer CV joint instead of the complete shaft?

Yes, if the shaft bar itself and the inner joint are in good condition, you can replace just the outer CV joint. We supply these separately as a cost-effective solution when replacing the entire driveshaft is unnecessary.

How quickly can my new drive shaft be delivered?

We process weekday orders promptly from our central warehouse in Helsingborg, Sweden, and ship across the European Union. We understand the importance of getting your BMW 3 Serie 325 D E91 back on the road without delay, so fast handling and dispatch are always our priority.

What does your fitment guarantee mean?

Our fitment guarantee ensures that when you choose your exact car using our make, model and engine selector, the recommended part is guaranteed to fit. In the unlikely event that it does not, we will assist you in finding the correct part at no extra charge.