Drive shafts for BMW 8 Serie

Looking for a premium-grade drive shaft for your BMW 8 Serie? As the international shop of a Swedish driveline specialist, we provide a carefully chosen range to ensure your vehicle...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for BMW 8 Serie

27 products
1 - 24 of 27
Item no.:1149495
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 584 mm
Item no.:2103260
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 878 mm
Item no.:6104882
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 645 mm
  • Diameter 1: 102 mm
  • ABS teeth: 48
Item no.:615306
  • Position: Rear
  • Total length: 640 mm
Item no.:613327
  • Position: Rear
  • Total length: 648 mm
Item no.:1110447
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 584 mm
Item no.:2135084
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 878 mm
Item no.:6147141
  • Position: Rear
  • Splines wheel side: 30
  • Total length: 645 mm
  • Diameter 1: 102 mm
  • ABS teeth: 48
Item no.:614615
  • Position: Rear
  • Total length: 640 mm
Item no.:615597
  • Position: Rear
  • Total length: 648 mm
Item no.:1151765
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 584 mm
Item no.:2164364
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 878 mm
Item no.:610260
  • Position: Rear
  • Total length: 648 mm
Item no.:1198532
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 584 mm
Item no.:2182597
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 878 mm
Item no.:1153180
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 584 mm
Item no.:2118249
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 878 mm
Item no.:1182745
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 584 mm
Item no.:2135137
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 878 mm
Item no.:1190081
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 584 mm
Item no.:2181786
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 878 mm
Item no.:1164656
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 584 mm
Item no.:2138180
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 878 mm
Item no.:1198265
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 584 mm
Showing 1–24 of 27 products

Drive shafts for BMW 8 Serie

The BMW 8 Serie represents the pinnacle of German engineering and performance, placing exceptionally high demands on every drivetrain component. A drive shaft for this model is far more than just a solid metal bar; it is a precision component engineered to cope with high torque loads and deliver a vibration-free driving experience. With us, you will find an extensive range of drive shafts tailored specifically to the diverse engine options and driveline setups within the 8 Series range. We focus on supplying parts that match or exceed original equipment specifications, ensuring your car retains its signature driving dynamics. Our comprehensive selection covers most requirements for this exclusive model range, whether you drive a modern diesel or a high-performance petrol engine.

What does a drive shaft do on the BMW 8 Serie?

The primary task of the drive shaft on a BMW 8 Serie is to transfer torque from the gearbox or differential directly to the road wheels. On models equipped with xDrive all-wheel drive, both the front and rear drive shafts play a vital role in distributing power effectively and maintaining traction across all conditions. Because the 8 Series is often powered by potent engines, these shafts endure immense stresses during hard acceleration. A properly functioning drive shaft ensures power reaches the tarmac cleanly without losses or intrusive vibrations, which is vital for the car's handling and safety. Driving on a compromised driveshaft not only risks degraded performance, but can also cause costly consequential damage to other drivetrain components.

Common signs of wear

Catching driveshaft issues early helps prevent far more expensive repairs. One of the clearest indications of a worn outer CV joint on a BMW 8 Serie is a clicking or knocking sound that becomes noticeable during tight turns at low speeds. If you feel vibrations through the car body under acceleration instead, this often points to a worn inner CV joint or an unbalanced shaft. Another warning sign is grease leaking around the CV boots, typically caused by splits or cracks that let in grit and moisture. Ignoring these symptoms can ultimately lead to total failure where drive is lost entirely—a particularly hazardous scenario at motorway speeds.

How to choose the right drive shaft

Selecting the correct component for such a technologically sophisticated car demands precision. There are significant differences between drive shafts depending on whether your car is rear-wheel drive or xDrive, as well as which engine variant is fitted under the bonnet. To ensure you receive a shaft with the exact length, spline count and mounting configuration, we always recommend filtering by your car's make, model and engine. This is the most reliable way to find the correct part first time. We cross-reference technical data against your vehicle's exact specification to guarantee an accurate fit without modifications, saving you time and hassle in the workshop. Our range is carefully chosen to meet the exacting standards BMW drivers expect.

Related parts to inspect

We also recommend checking these specific category pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, related parts on the same car often warrant inspection too. By comparing these exact pages for the BMW 8 Serie, it becomes much easier to determine whether the issue lies with the drive shaft itself or another adjacent section of the power transmission.

This is especially important on models where vibrations, play and unwanted noises can transfer between interconnected driveline parts. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent worn part that contributes to the very same fault.

Replacing worn components together delivers a lasting repair, preserving your vehicle's exceptional refinement and mechanical integrity.

Why buy from CVJoint24?

As the international shop of a Swedish driveline specialist, we offer an in-depth expertise that general car parts stores rarely match. We maintain a sharp focus on categories like drive shafts and CV joints, allowing us to supply premium-quality components with dependable fitment. When you order from CVJoint24, you receive more than just a spare part: you get the reassurance of a component meticulously selected for your BMW 8 Serie. Shipping fast from our Helsingborg warehouse across the EU, backed by customer support that genuinely understands driveline engineering, we are the trusted choice for demanding BMW owners who insist on getting the right part every time.

Frequently asked questions about drive shafts for BMW 8 Serie

How do I know if my BMW 8 Serie needs a new drive shaft?

Common symptoms include clicking noises when cornering, vibrations felt through the steering wheel or seat under acceleration, and visible grease leaking from damaged CV boots.

Does the same drive shaft fit all BMW 8 Serie models?

No, drive shafts differ depending on whether the car has xDrive all-wheel drive or rear-wheel drive, as well as the engine and gearbox fitted. Always select your specific vehicle model and engine variant.

What is the difference between the inner and outer CV joint on my BMW?

The outer CV joint is located at the wheel hub and accommodates steering angles, whilst the inner CV joint sits at the gearbox or differential and accommodates suspension travel and length changes.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, if the shaft itself is straight and undamaged, it is often sufficient to replace only the worn CV joint, which is frequently a more cost-effective option.

How quickly can a drive shaft for BMW 8 Serie be delivered?

We aim to dispatch all in-stock items promptly from our central warehouse so you can get your car back on the road without delay.

Do you guarantee correct fitment for drive shafts?

Yes, when you select your specific BMW 8 Serie model, year and engine variant, we guarantee that the recommended part will fit your car perfectly.