Drive shafts for BMW X4

Find the right drive shaft for your BMW X4, whether you drive an early 2014 model or a newer generation. Here you will find a broad selection of drive shafts engineered for...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Drive shafts for BMW X4

198 products
1 - 24 of 198
Item no.:1195894
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 592 mm
  • Joint diameter: 86 mm
Item no.:2186378
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 825 mm
  • Joint diameter: 87,8 mm
Item no.:4148449
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 769 mm
  • Joint diameter: 88 mm
Item no.:7301578
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 881 mm
  • Joint diameter: 86 mm
Item no.:5109902
  • Position: Rear right
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 827 mm
Item no.:4193957
  • Position: Rear left
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 771 mm
Item no.:1175401
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 575 mm
Item no.:2131685
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 875 mm
Item no.:417255
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 730 mm
Item no.:519993
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 785 mm
Item no.:411825
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 731 mm
Item no.:515781
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 782 mm
Item no.:613062
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 764 mm
  • Joint diameter: 87,8 mm
Item no.:516211
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 829 mm
  • Joint diameter: 94 mm
Item no.:414155
  • Position: Rear left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 770 mm
  • Joint diameter: 87,8 mm
Item no.:616665
  • Position: Rear
  • Splines gearbox side: 32
  • Splines wheel side: 30
  • Total length: 833 mm
Item no.:614188
  • Position: Rear
  • Splines gearbox side: 32
  • Splines wheel side: 30
Item no.:519377
  • Position: Rear right
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 825 mm
  • Joint diameter: 88 mm
Item no.:1161327
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 574 mm
Item no.:2121398
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 872 mm
Item no.:1174367
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 574 mm
Item no.:2192961
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 875 mm
Item no.:2158915
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 37
  • Total length: 875 mm
Item no.:1186261
  • Position: Front left
Showing 1–24 of 198 products

Drive shafts for BMW X4

The drive shaft is a critical component in your BMW X4 drivetrain. It is responsible for transferring torque from the gearbox or differential directly to the wheels, propelling the vehicle forward. For a performance-oriented SUV like the BMW X4, high demands are placed on these components to withstand heavy loads, particularly during hard acceleration and driving on varied terrain. At CVJoint24, we understand the importance of precision and durability, which is why we offer a carefully chosen range specifically for this model series. Selecting the correct part is crucial for maintaining the driving dynamics and stability that define a BMW X4.

Our products are developed to meet or exceed original equipment specifications, giving you complete confidence when choosing spare parts. As the BMW X4 is frequently used for both urban driving and long motorway journeys, it is vital that the drive shaft is perfectly balanced to eliminate vibrations. By investing in a quality driveshaft, you ensure that the car's advanced suspension system works undisturbed and that power reaches the road without losses or noises.

What does a drive shaft do on a BMW X4?

On a BMW X4, the drive shaft acts as the final link in the drivetrain before power reaches the road surface. Because most X4 models feature the intelligent xDrive all-wheel-drive system, there are drive shafts fitted both at the front and rear. These shafts must handle both steering angle variations (for the front shafts) and the vertical travel caused by the suspension. Inside the drive shaft are CV joints that provide this flexibility whilst transferring power smoothly and efficiently.

If a drive shaft fails, the car loses its ability to distribute power effectively between the wheels, which can cause reduced traction and stability, especially in adverse weather conditions. Ensuring your drive shaft is in top condition preserves your car's sporty handling and safety. It is an advanced engineering component requiring precise manufacturing to handle the high torque produced by modern BMW engines. A properly functioning driveshaft also reduces wear on the gearbox and differential by minimising driveline lash and jerkiness.

Common signs of wear

There are several clear warning signs indicating that a drive shaft on your BMW X4 may need replacing. One of the most common symptoms is a clicking or knocking noise clearly heard during sharp turns at low speeds. This is often caused by a worn outer CV joint or one that has lost its grease due to a damaged CV boot. Another sign is vibration during acceleration, which frequently points to imbalance or wear in the inner constant velocity joint closest to the gearbox.

If you notice grease splattered across the inside of the wheel rim or around the wheel arch, it indicates that a CV joint boot has split. Once the boot fails, dirt and moisture penetrate quickly, leading to rapid wear and eventual failure. Ignoring these symptoms can lead to the drive shaft snapping entirely, leaving the vehicle stranded. Inspecting the drivetrain at the first sign of unusual noises is sensible prevention against expensive repairs and unexpected breakdowns on the road.

How to choose the correct drive shaft

Finding the exact drive shaft for a BMW X4 can be challenging because specifications differ depending on the engine variant, gearbox type, and model year. The most reliable step is to use our vehicle selector to choose your make, model and engine. This filters out the products tailored to your exact car. Always check technical dimensions such as overall length, the number of splines (teeth) on both the inner and outer ends, and whether the shaft is intended for the left- or right-hand side.

For the BMW X4, it is also essential to know whether the component is for the front or rear axle, as their designs differ substantially. Comparing these details with the existing part on the car minimises the risk of ordering the wrong item. Our database is optimised to give you accurate matches for your BMW X4, saving both time and money during the repair. We also recommend checking whether your car has specific factory options affecting the drivetrain layout, such as the M Sport package or adaptive suspension systems.

Related parts to check

Be sure to check these relevant pages for the same vehicle when working on the drive shaft:

When one driveline component shows signs of wear, neighbouring parts on the vehicle often require inspection too. By checking these related pages for the BMW X4, it becomes much easier to determine whether the issue lies purely with the drive shaft or in an adjacent area of the power transmission system.

This is particularly relevant on models where vibrations, play, and noises can transmit between multiple components across the drivetrain. A quick review of related categories prevents you from replacing one component while missing an adjacent part that contributes to the very same symptom.

By inspecting the entire driveline system together, you ensure a durable long-term repair and avoid having to repeat the job shortly afterwards. Replacing cracked CV boots in good time will also significantly extend the service life of your new drive shafts.

Why shop with CVJoint24?

CVJoint24 is your dedicated partner for BMW driveline and power transmission components. As a Swedish driveline specialist, we offer an extensive product catalogue backed by in-depth technical expertise that generic car parts retailers rarely match. We focus exclusively on components such as drive shafts, CV joints, and propeller shafts, allowing us to maintain rigorous quality control and provide precise fitting recommendations. We know exactly what is required to keep a BMW X4 performing at its best.

Using our make, model and engine selection tool gives you a smooth shopping experience focused on accurate fitment. We understand that your vehicle demands parts that endure, which is why we supply only reliable, thoroughly tested products. With fast dispatches from our central Swedish warehouse and a customer service team that truly understands drivetrains, we are the natural choice for both DIY mechanics and garages seeking durable solutions. Thanks to our specialised stock depth, we almost always have the right component on the shelf, ready to ship across Europe.

Frequently Asked Questions about Drive Shafts for BMW X4 – High-Quality Drive Shafts for Your Car

How do I know which drive shaft fits my BMW X4?

The easiest and most reliable way is to select your BMW X4 model, engine variant and year of manufacture in our vehicle selector. This filters out the drive shafts specifically tailored to your car's engine, gearbox and model year.

What are the most common symptoms of a faulty drive shaft on a BMW X4?

The most common signs are clicking noises during sharp turns, vibrations during acceleration, and grease splattered on the inside of the wheels caused by a split CV boot.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft itself is undamaged, you can often replace only the outer or inner CV joint. We supply both complete drive shafts and individual CV joints for the BMW X4.

Is there a difference between front and rear drive shafts on a BMW X4?

Yes, the front and rear drive shafts have completely different designs and dimensions. It is therefore essential to verify the fitting position before ordering.

Why does my BMW X4 vibrate during acceleration?

Vibrations during acceleration are frequently caused by wear in the inner CV joint or an imbalance in the drive shaft. It can also stem from issues with the propeller shaft on four-wheel-drive models.

How long does a drive shaft normally last?

A drive shaft can last for the lifetime of the vehicle, but its lifespan is drastically reduced if the CV boot splits and dirt enters. Regular inspection of the boots is therefore vital.

Are CV boots and grease included when I buy a drive shaft from you?

Yes, our complete drive shafts are supplied fully assembled with CV boots, grease and all necessary mounting hardware to make fitting straightforward.