Drive shafts for Chrysler Voyager

Finding the correct drive shaft for your Chrysler Voyager is vital for ride comfort and safety. As a spacious, heavy minibus, the Voyager puts substantial strain on its drivetrain,...

Products for Drive shafts for Chrysler Voyager

32 products
1 - 24 of 32
Item no.:1128668
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 635 mm
  • ABS teeth: 47
Item no.:2172286
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 1,029 mm
  • ABS teeth: 47
Item no.:1115551
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 615 mm
  • ABS teeth: 47
Item no.:7308175
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 611 mm
  • Joint diameter: 92 mm
Item no.:2175380
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 1,029 mm
  • ABS teeth: 47
Item no.:7317258
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 1,008 mm
  • Joint diameter: 92 mm
Item no.:1103960
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 640 mm
  • ABS teeth: 47
Item no.:2112682
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 1,032 mm
  • ABS teeth: 47
Item no.:1145815
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 615 mm
Item no.:2126816
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 1,029 mm
Item no.:2149127
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 1,029 mm
  • ABS teeth: 47
Item no.:6171291
  • Position: Rear
  • Splines gearbox side: 110
  • Splines wheel side: 26
  • Total length: 749 mm
  • ABS teeth: 50
Item no.:1176413
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 614 mm
  • ABS teeth: 47
Item no.:2152409
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 1,000 mm
  • ABS teeth: 47
Item no.:1192028
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 614 mm
  • Joint diameter: 92 mm
Item no.:2167032
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 1,000 mm
  • Joint diameter: 92 mm
Item no.:1131463
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 612 mm
  • Diameter 1: 92 mm
Item no.:1193295
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 612 mm
  • ABS teeth: 47
Item no.:2112652
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 1,033 mm
  • ABS teeth: 47
Item no.:2173363
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 1,002 mm
  • Diameter 1: 92 mm
Item no.:2173830
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 1,002 mm
  • ABS teeth: 47
Item no.:2185764
  • Position: Front right
Item no.:1188800
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 614 mm
  • Joint diameter: 93 mm
Item no.:2157300
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 1,000 mm
  • Joint diameter: 93 mm
Showing 1–24 of 32 products

Drive shafts for Chrysler Voyager

For decades, the Chrysler Voyager has been one of the most popular vehicles for large families, but its size and weight place high demands on mechanical components. The drive shaft is one of the hardest-working parts, constantly transmitting power from the engine to the wheels under varied loads. At CVJoint24, we understand the specific drivetrain challenges of this model. We offer an extensive range of drive shafts engineered to withstand the torque and weight of a fully laden Voyager. Whether you drive an older generation or a later model year, our goal is to supply components that restore your vehicle's original driving comfort and reliability.

Our selection comprises carefully chosen products, ensuring coverage for most engine options and gearbox configurations on the market. Choosing a drive shaft from a specialist means you receive a part with correctly hardened steel and premium constant velocity joints pre-lubricated with the appropriate grease. This is especially vital for the Chrysler Voyager, where undersized aftermarket parts often lead to premature vibration or failure. Shopping with us gives you access to technical expertise and car parts selected for durability and precise fitment.

What does a drive shaft do on a Chrysler Voyager?

The drive shaft on a Chrysler Voyager serves as the primary link in the power transmission between the gearbox and the driven wheels. Its main function is to transfer the torque generated by the engine so the vehicle can move forwards or backwards. Because the Voyager is front-wheel drive in most configurations, the drive shafts must not only transmit power, but also allow the wheels to steer and move vertically with the suspension. This articulation is enabled by the inner and outer CV joints situated at each end of the shaft.

Beyond rotating, the driveshaft must absorb the vibrations and impacts caused by uneven road surfaces. On a heavy vehicle such as the Chrysler Voyager, this is a demanding task. If a drive shaft becomes unbalanced or the joints begin to bind, vehicle stability suffers. A properly functioning drive shaft ensures smooth power delivery, providing seamless acceleration and reducing wear on neighbouring drivetrain components such as the differential and gearbox output seals. Understanding the drive shaft's vital role highlights why quality should never be compromised when replacing it.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Chrysler Voyager is reaching the end of its service life. One of the most frequent signs is a clicking or knocking noise when taking sharp turns at low speeds. This noise typically originates from the outer CV joint and occurs when grease has leaked out or dirt has entered, causing mechanical wear in the bearing tracks. Ignoring this can eventually lead to the joint seizing or snapping, leaving the vehicle stranded.

Another common symptom is vibration felt specifically under acceleration. If the steering wheel or the entire vehicle shudders under throttle, but settles once you lift off, the inner CV joint is often the culprit. On the Chrysler Voyager, these vibrations are sometimes misdiagnosed as wheel imbalance, but when tied directly to engine load, the drive shaft is the likely cause. Finally, always inspect for grease splatters on the inside of the wheel rim or the wheel arch liner, which clearly indicates a split CV boot requiring immediate attention before secondary damage occurs.

How to choose the correct drive shaft

Selecting the correct drive shaft for a Chrysler Voyager can be challenging due to the numerous variations across engine sizes, gearbox types (manual or automatic) and production years. Differences in overall length, spline tooth counts on the shaft ends, and ABS ring configurations mean precision is crucial. To make the process straightforward and reliable, simply select your car's make, model and engine from our catalogue to filter out incompatible parts.

When choosing a replacement, also consider whether you require a complete drive shaft or just an individual joint. In many cases, replacing the entire driveshaft proves more cost-effective and saves workshop time, as it arrives with brand new joints and CV boots pre-assembled from the factory. Furthermore, check whether your vehicle requires an ABS ring on the shaft, as an incorrect tooth count will trigger faults in your safety systems. With our accurate fitment data, you can be confident that the part you order will fit your Chrysler Voyager properly.

Related parts to check

Be sure to check these related pages for the same vehicle when working on the drive shaft:

When one drivetrain component wears out, adjacent parts on the vehicle often require inspection as well. Comparing these exact pages for the Chrysler Voyager makes it easier to diagnose whether an issue lies with the drive shaft itself or another related transmission component.

This is particularly relevant on models where vibrations, play and strange noises can transfer between several drivetrain parts. A quick check of related categories reduces the risk of replacing the right type of component while missing another worn part that produces identical symptoms.

While working on the drive shaft of your Chrysler Voyager, it is an ideal time to inspect neighbouring suspension and driveline components. Parts operating under the same loads often share similar wear, and replacing them together saves time and labour costs. We recommend inspecting the wheel bearings and ball joints, as these are typically disturbed during drive shaft replacement.

Here are the key related categories for your vehicle:

  • Outer CV joints for Chrysler Voyager – If the shaft itself is sound but the joint clicks.
  • Inner CV joints for Chrysler Voyager – For vibrations under acceleration.
  • Propeller shaft centre bearings for Chrysler Voyager – Essential for keeping the shaft stable and vibration-free.
  • CV boots for Chrysler Voyager – The most cost-effective way to protect your CV joints.
  • ABS rings for Chrysler Voyager – Inspect to ensure the ring is not cracked or corroded.
By reviewing the entire system, you ensure that your Chrysler Voyager remains quiet, dependable and safe on the road for many kilometres to come.

Why shop with CVJoint24?

CVJoint24 is not just an ordinary auto parts retailer; we are a dedicated specialist focusing strictly on drivetrains and power transmission. For Chrysler Voyager owners, this provides access to a deeper inventory and higher technical competence than general suppliers offer. We understand the fine specifications that separate an adequate drive shaft from an exceptional one, stocking only components proven to handle demanding loads and European roads.

Choosing CVJoint24 gives you confidence in parts backed by proper technical verification. With fast dispatch across the EU from our central warehouse in Helsingborg, Sweden, we keep your vehicle's garage downtime to a minimum. We combine the extensive range of a major supplier with the knowledgeable customer support of a focused specialist. Turn to CVJoint24 for a smooth ordering process and drivetrain parts that keep your vehicle running at its best.

Frequently Asked Questions about Drive Shafts for Chrysler Voyager

How do I know which drive shaft fits my Chrysler Voyager?

The easiest and most reliable method is to select your car's make, model, and engine variant in our store. Because drive shafts vary substantially depending on engine size and transmission type, filtering by your exact vehicle specification ensures you get the correct spline count and shaft length.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, provided the shaft itself is undamaged, you can replace solely the inner or outer CV joint. We supply both complete drive shafts and individual joints for Chrysler Voyager, though fitting a complete shaft is often more cost-effective when factoring in workshop labour.

Why does my Chrysler Voyager vibrate under acceleration?

Vibrations when accelerating are a textbook symptom of a worn inner CV joint. On a substantial vehicle like the Voyager, this is particularly noticeable. Check for play in the inner section of the drive shaft or inspect whether a CV boot has split.

Are CV boots included when I purchase a complete drive shaft?

Yes, when you buy a complete drive shaft from us, it always comes fully assembled with CV boots, CV joints, and fresh grease. It is an all-in-one replacement ready to get your car back on the road swiftly.

Is there a difference between drive shafts for manual and automatic transmissions?

Yes, there are often differences in both total length and the gearbox-side mounting depending on whether your Voyager has a manual or automatic gearbox. Always select your car's exact model and engine configuration to find the correct version.

How long does delivery take for a drive shaft?

We dispatch all in-stock items promptly across Europe. As a Swedish driveline specialist dedicated to drive components, we process and handle your order quickly and efficiently.

What happens if I continue driving with a broken or worn drive shaft?

A failing drive shaft can ultimately snap, causing the car to lose all propulsion and leave you stranded. If a joint seizes, it can also cause extensive damage to the gearbox or suspension components, making prompt repair essential.