Drive shafts for Citroen Berlingo Berlingo First

Looking for a replacement drive shaft for your Citroen Berlingo Berlingo First? As a Swedish driveline specialist, we supply a carefully chosen range of drive shafts precision-engineered...

Products for Drive shafts for Citroen Berlingo Berlingo First

9 products
1 - 9 of 9
Item no.:119410
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 594 mm
  • Joint diameter: 87 mm
Item no.:114236
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 594 mm
  • ABS teeth: 29
Item no.:1193413
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 592 mm
  • ABS teeth: 48
Item no.:214191
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 865 mm
  • Joint diameter: 87 mm
Item no.:217349
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 868 mm
  • ABS teeth: 48
Item no.:212568
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 939 mm
  • Joint diameter: 86 mm
Item no.:215378
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 865 mm
  • ABS teeth: 29
Item no.:114928
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 625 mm
  • Joint diameter: 86 mm
Item no.:115550
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 600 mm
  • ABS teeth: 48

Drive shafts for Citroen Berlingo Berlingo First

The Citroen Berlingo Berlingo First is an iconic van that has faithfully served businesses and private motorists for many years. As one of the most versatile vehicles in its class, it places heavy demands on its mechanical components, not least the drive shafts. The drive shaft is the vital link ensuring engine power is converted into forward motion, and in a vehicle frequently carrying heavy loads, these components are exposed to immense torque and mechanical stress. Here at CVJoint24, you will find a carefully selected range tailored specifically to this model. We focus on providing parts that not only fit physically, but also match or exceed the quality of original equipment to guarantee long service life and dependable operation in harsh European conditions.

What does a drive shaft do on a Citroen Berlingo Berlingo First?

To understand the importance of a properly functioning drive shaft on your Citroen Berlingo Berlingo First, you have to look at its role in power transmission. The drive shaft is an articulating shaft connecting the gearbox output shafts to the wheel hubs. Because the front wheels of a Berlingo handle both propulsion and steering, the drive shaft must be able to articulate through various angles while rotating at high speeds. This is made possible by constant velocity (CV) joints. The inner joint mounts to the gearbox and allows the shaft to plunge in and out as the vehicle's suspension travels up and down. The outer joint sits at the wheel hub and accommodates large angular movements when steering. If either of these components fails, the van loses its ability to transfer drive efficiently, which can lead to a complete breakdown.

Common signs of wear

Spotting drive shaft wear early can save you both money and hassle. The most classic symptom of a worn outer CV joint on a Citroen Berlingo Berlingo First is a rhythmic clicking noise when cornering or making tight turns. If the noise disappears once the steering wheel straightens out, it is a clear sign that the joint is worn out. Vibrations felt through the chassis during acceleration, particularly between 50 and 90 km/h, often indicate that the inner CV joint has developed play or that the driveshaft itself is bent. CV boots are another critical checkpoint. These rubber gaiters retain lubricating grease and seal out water and road dirt. If you spot cracks in the rubber or grease splattered across surrounding suspension components, you should replace the parts immediately to prevent catastrophic failure.

How to choose the correct drive shaft

When it is time to purchase a replacement drive shaft for your Citroen Berlingo Berlingo First, precision is everything. It is not enough simply to know that you drive a Citroen; you must know your vehicle's exact technical configuration. Dimensions such as overall shaft length, the number of splines on both the inner and outer ends, and whether the van features ABS all play a critical role. On certain Berlingo models, the ABS reluctor ring is pressed directly onto the outer CV joint; if the tooth count does not match your vehicle's sensor, the ABS warning light will illuminate. To ensure you select the correct part, simply filter our range by selecting your vehicle's make, model and engine variant, ensuring a reliable fit for your specific van.

Related parts to inspect

Be sure to inspect these related pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, neighbouring parts on the vehicle often warrant inspection too. Comparing these exact pages for the Citroen Berlingo Berlingo First makes it easier to determine whether an issue lies with the drive shaft or another part of the power transmission system.

This is particularly relevant on models where vibrations, play and unusual noises can transfer symptoms across several driveline components. Checking related categories reduces the risk of replacing the correct component type while overlooking an adjacent worn part that contributes to the very same problem.

Why buy from CVJoint24?

Shopping with CVJoint24 means choosing an established driveline specialist. We are a Swedish specialist business shipping across the EU from our warehouse in Helsingborg, Sweden, with a thorough understanding of the challenges that demanding European roads present for the Citroen Berlingo Berlingo First. Our focus is on delivering first-class quality and guaranteed fitment so that you get the right part straight away. We combine technical expertise with an easy-to-use vehicle selector to ensure you always find the right fit. Turn to CVJoint24 for dependable service, drivetrain expertise and car parts engineered to perform year after year.

Frequently Asked Questions about Drive Shafts for Citroen Berlingo Berlingo First

How do I know if the drive shaft fits my Citroen Berlingo Berlingo First?

The easiest and most reliable way is to select your car's make, model and engine variant in our search filter. This displays the parts that are technically verified for your specific vehicle.

What are the most common symptoms of a failing drive shaft?

The most common signs are clicking noises when cornering sharply, steering wheel vibrations under acceleration, or visible damage and grease leaks from the drive shaft boots.

Can I replace just the outer CV joint on my Berlingo?

Yes, if the shaft itself is straight and the inner joint is in good condition, you can replace just the outer CV joint. We supply both individual joints and complete drive shafts.

Why does my Citroen Berlingo Berlingo First vibrate during acceleration?

Vibration during acceleration is often caused by wear in the inner CV joint or issues with the centre bearing on the longer drive shaft. It can also be due to an imbalance in the shaft itself.

Are boots and grease included when I buy a complete drive shaft?

Yes, our complete drive shafts are supplied fully assembled with CV boots, grease and the necessary mounting hardware to make installation as straightforward as possible.

How quickly will my new drive shaft be delivered?

We offer fast dispatch on in-stock items from our central warehouse, ensuring your new drive shaft reaches you promptly across the EU.