Drive shafts for Citroen C5 I Break

Need a replacement drive shaft for your Citroen C5 I Break? As a Swedish driveline specialist shipping across the EU, we provide a wide selection of 14 tailored options for your vehicle....

Products for Drive shafts for Citroen C5 I Break

20 products
1 - 20 of 20
Item no.:1180963
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 645 mm
  • Joint diameter: 92 mm
Item no.:2159968
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 935 mm
  • Joint diameter: 92 mm
Item no.:2143390
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 915 mm
  • Joint diameter: 100 mm
Item no.:1139707
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 602 mm
  • Joint diameter: 100 mm
Item no.:2109754
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 929 mm
  • Thread size: M24x1.5
Item no.:1136095
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 625 mm
  • Joint diameter: 100 mm
Item no.:1190890
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 640 mm
  • Joint diameter: 100 mm
Item no.:2162320
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 950 mm
  • Joint diameter: 100 mm
Item no.:210876
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 845 mm
  • Diameter 1: 90 mm
Item no.:114494
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 633 mm
  • Diameter 1: 90 mm
Item no.:2145302
  • Splines gearbox side: 25
  • Splines wheel side: 37
  • Total length: 942 mm
  • Thread size: M24x1.5
Item no.:2160644
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 936 mm
  • Seal ring diameter: 59 mm
Item no.:1111594
  • Position: Front left
  • Splines gearbox side: 26
  • Total length: 635 mm
Item no.:2122859
  • Position: Front right
Item no.:113040
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 649 mm
  • Joint diameter: 90 mm
Item no.:2153512
  • Position: Front right
  • Splines wheel side: 25
  • Joint diameter: 100 mm
Item no.:1190991
  • Position: Front left
  • Splines wheel side: 25
  • Joint diameter: 100 mm
Item no.:1147646
  • Position: Front left
  • Splines wheel side: 25
  • Joint diameter: 100 mm
Item no.:1133007
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 620 mm
  • Joint diameter: 100 mm
Item no.:2167081
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 934 mm
  • Joint diameter: 100 mm

Drive shafts for Citroen C5 I Break

The Citroen C5 I Break is renowned for its outstanding comfort and unique hydropneumatic suspension, but maintaining its smooth ride demands a perfectly functioning drivetrain. A drive shaft for Citroen C5 I Break is subjected to heavy loads throughout its service life, particularly on the estate variant which is frequently used for carrying heavier cargo and covering long distances. At CVJoint24, we offer a carefully chosen range of drive shafts specifically engineered to satisfy the technical requirements of this model generation. By choosing the right components, you ensure power is transferred smoothly without disruptive vibrations. Our shafts are built to withstand demanding European road conditions and varied weather, making them a dependable choice for your Citroen.

What does the drive shaft do on the Citroen C5 I Break?

The drive shaft on your Citroen C5 I Break performs the vital task of transferring torque directly from the gearbox to the front wheels, setting the vehicle in motion. Because the C5 I Break is front-wheel drive, the drive shafts must handle substantial suspension travel and variable steering angles simultaneously. This is achieved via the inner and outer CV joints fitted to the shaft. The inner constant velocity joint accommodates longitudinal plunge as the suspension moves, while the outer CV joint allows the front wheels to turn. On the Citroen C5 I Break, the right-hand drive shaft is typically longer and fitted with an intermediate support bearing to counteract torque steer and vibrations. Without an intact drive shaft, the car cannot be driven safely, and a failed driveshaft can leave you entirely without drive.

Common signs of wear

There are several clear symptoms indicating that a drive shaft on your Citroen C5 I Break is wearing out and due for replacement. One of the most common signs is a rhythmic clicking or knocking sound on full steering lock under acceleration, which almost always points to a worn outer CV joint. If you experience severe vibrations through the steering wheel or the entire bodyshell under acceleration, this usually signals an issue with the inner joint or an unbalanced shaft. Another critical symptom is grease spattered across the inner wheel rim or wheel arch. This is typically caused by a split CV boot, allowing grit to enter and lubricating grease to escape. Left unaddressed, the drive shaft will quickly fail due to excessive friction and overheating.

How to choose the correct drive shaft

Selecting the correct drive shaft for your Citroen C5 I Break requires care, as specifications vary depending on engine variant, gearbox type and year of manufacture. Differences between shafts include overall length, spline count on both the outer and inner ends, and whether the shaft features an integrated ABS ring. To make sure you select the right part first time, use our search filter by selecting your car's make, model and engine. This narrows down the options specifically for your vehicle, ensuring a direct fit without any need for modifications. Always verify whether your car has a manual or automatic gearbox, as this is often a determining factor for correct driveshaft fitment.

Related parts to check

We also recommend checking these exact pages for the same car when working on the drive shaft:

When one drivetrain component shows signs of wear, related parts on the car often require inspection as well. Comparing these exact pages for the Citroen C5 I Break makes it easier to establish whether the fault lies in the drive shaft itself or in a neighbouring part of the transmission.

This is especially important on models where vibrations, play and strange noises can transfer between multiple parts of the same drivetrain. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent worn part causing the same symptoms.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist based in Helsingborg, Sweden, shipping quality components across the EU. We understand the specific technical demands of vehicles like the Citroen C5 I Break and supply only top-grade parts. With our precise vehicle selector and strict fitment standards, you can order with complete confidence. We aim to offer premium products at competitive prices, backed by dedicated drivetrain expertise. Thanks to our streamlined warehouse logistics, we dispatch quickly across Europe to get your car back on the road without delay. Choosing CVJoint24 means choosing reliability, prompt service and specialised technical knowledge for your vehicle's essential driveline parts.

Frequently asked questions about drive shafts for Citroen C5 I Break

How do I know if my Citroen C5 I Break needs a new drive shaft?

The most common signs are clicking noises when cornering, vibrations under acceleration, or visible grease leaks from split CV boots. If the vibrations increase with speed, it is often a sign of internal wear.

Can I replace just the outer CV joint instead of the entire shaft?

Yes, if the shaft bar itself is undamaged and the issue lies in the outer joint, you can save money by replacing just the outer CV joint. We offer both complete drive shafts and individual CV joints.

Why is my Citroen vibrating under acceleration?

Vibrations under acceleration on a Citroen C5 I Break are often caused by wear in the inner CV joint or because the centre bearing on the long right-hand drive shaft has deteriorated.

Does the same drive shaft fit both the right and left sides?

No, on the Citroen C5 I Break, the drive shafts are of different lengths. The left-hand shaft is shorter and goes directly into the gearbox, whilst the right-hand shaft is longer and is typically supported by an intermediate bearing.

What is included when I buy a complete drive shaft from you?

When you purchase a complete drive shaft, it usually includes both the inner and outer joints, fitted CV boots packed with grease, as well as the necessary fitting accessories such as nuts or bolts.

How does the car's ride height affect the drive shafts?

Because the C5 features adjustable ride height, the drive shafts operate at varying angles. If the suspension system is not working correctly, it can lead to abnormal wear on the CV joints due to extreme operating angles.