Drive shafts for Citroen C5 II Break

Need a replacement drive shaft for your Citroen C5 II Break? As driveline specialists, we supply a carefully chosen range of drive shafts tailored to your vehicle. The Citroen C5 II...

Products for Drive shafts for Citroen C5 II Break

17 products
1 - 17 of 17
Item no.:1148138
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 640 mm
  • Joint diameter: 100 mm
Item no.:2136411
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 950 mm
  • Joint diameter: 100 mm
Item no.:2160411
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 935 mm
  • Joint diameter: 92 mm
Item no.:1189254
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 602 mm
  • Joint diameter: 100 mm
Item no.:2142324
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 953 mm
  • Joint diameter: 98 mm
Item no.:2121897
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 927 mm
  • Joint diameter: 92 mm
Item no.:1107619
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 625 mm
  • Joint diameter: 100 mm
Item no.:1107708
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 620 mm
  • Joint diameter: 92 mm
Item no.:1158740
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 645 mm
  • Joint diameter: 92 mm
Item no.:2143880
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 929 mm
  • Thread size: M24x1.5
Item no.:2111516
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 915 mm
  • Joint diameter: 100 mm
Item no.:118938
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 649 mm
  • Joint diameter: 90 mm
Item no.:2135133
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 936 mm
  • Seal ring diameter: 59 mm
Item no.:217916
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 845 mm
  • Diameter 1: 90 mm
Item no.:119803
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 633 mm
  • Diameter 1: 90 mm
Item no.:116861
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 670 mm
  • Joint diameter: 86 mm
Item no.:217450
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 958 mm
  • Joint diameter: 92 mm

Drive shafts for Citroen C5 II Break

Maintaining the drivetrain on a Citroen C5 II Break is crucial for both comfort and safety. This spacious estate is renowned for carrying passengers and cargo in exceptional comfort, but this also places substantial stress on the car's drive shafts. A defective drive shaft can lead to anything from irritating vibrations to a total breakdown if neglected. At CVJoint24, you will find components engineered specifically to meet the technical demands of this exact generation. We understand the importance of precision, which is why our range is tailored to cover the various engine options and gearbox configurations available for the C5 II Break.

By choosing a model-specific component, you ensure that power transmission remains efficient and free from unnecessary wear on other drivetrain parts. We focus on supplying high-quality parts built to withstand the demands of European roads and changing driving conditions. Whether you run an economical diesel or a more powerful petrol engine, we have the right solution for your vehicle's specific needs.

What does a drive shaft do on a Citroen C5 II Break?

The primary role of the drive shaft on a Citroen C5 II Break is to transfer torque from the gearbox to the front wheels. Because this model is front-wheel drive, the drive shafts play a central part in the vehicle's acceleration and manoeuvrability. A drive shaft consists of an axle shaft with two joints: an inner joint that connects to the gearbox and an outer joint at the wheel hub. These joints allow the shaft to move up and down with the suspension and pivot as you steer, which is critical for a car equipped with Citroen's distinctive suspension system.

For the Citroen C5 II Break, it is especially vital that the driveshaft accommodates all suspension movement without losing efficiency. If the shaft does not function correctly, it compromises not only propulsion but also handling stability and steering feel. A properly functioning drive shaft guarantees smooth power delivery, eliminating jerkiness and enhancing the overall driving experience. It is a sophisticated component that requires an exact fit to operate reliably throughout the vehicle's life.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Citroen C5 II Break is wearing out. One of the most frequent signs is a clicking or knocking noise when taking tight corners at low speed. This typically points to a worn outer CV joint. If you instead experience vibrations through the steering wheel or throughout the car during acceleration, it often suggests a worn inner joint or that the shaft itself has been thrown out of balance. These vibrations usually intensify as speed and engine load increase.

Another vital warning sign to look out for is grease splattered across the inner wheel rim or around the wheel arch. This is generally caused by a split CV boot, which allows lubricating grease to escape and road dirt to penetrate the joint. Caught early, replacing just the boot can often resolve the issue; however, once the joint sustains internal damage, replacing the entire drive shaft is usually necessary. Ignoring these warnings can lead to shaft failure, causing a complete loss of drive.

How to choose the correct drive shaft

Selecting the correct drive shaft for your Citroen C5 II Break requires close attention, as specifications vary according to engine size, gearbox type and production year. Differences include shaft length, the number of splines (teeth) at the ends, and whether the vehicle requires integrated ABS rings on the shaft. For instance, a driveshaft for a 1.6 HDi is not identical to one for a 3.0 V6, as the latter must cope with considerably higher torque and therefore features a heavier-duty build.

To ensure you order the right part, always select your vehicle's make, model and engine variant in our shop. This filters out incompatible products and presents only the parts designed for your exact car. Be sure to check whether it is the left or right side that needs replacing, as drive shafts almost always differ in length due to the offset positioning of the gearbox. Taking care during selection avoids needless returns and gets your repair completed without delay.

Related parts to inspect

Take a moment to check these exact pages for the same vehicle when working on the drive shaft:

When a drivetrain component develops wear, adjacent parts on the same car often require attention as well. Comparing these exact pages for the Citroen C5 II Break makes it easier to determine whether the issue lies purely within the drive shaft or involves another neighbouring section of the transmission.

This is particularly relevant on models where vibrations, play and noises can easily transfer between components across the drivetrain. A quick check of related categories minimises the risk of replacing the right part while missing an adjacent component that causes the same underlying fault.

By inspecting the complete assembly, you safeguard your Citroen's ongoing reliability. A new drive shaft fitted alongside sound CV boots and tight fastenings delivers the best conditions for many kilometres of trouble-free motoring.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist. We understand the technical challenges of automotive power transmission and maintain an extensive, highly specialised catalogue. When shopping with us, you can rely on accurate fitment thanks to our vehicle compatibility data and precise specifications, removing the guesswork from choosing the correct car parts.

All orders are dispatched from our central warehouse in Helsingborg, Sweden, ensuring swift, dependable delivery across the European Union so your car spends less time off the road. Our commitment is always to provide high-quality components at competitive prices. Backed by specialist driveline expertise, we are the trusted choice for Citroen owners who refuse to compromise on safety or performance.

Frequently asked questions about drive shafts for Citroen C5 II Break

How do I know if my Citroen C5 II Break needs a new drive shaft?

The most common symptoms are clicking noises when turning, vibrations under acceleration, or visible grease leaks from split CV boots around the wheel arch.

Does the same drive shaft fit both the right and left side?

No, on the Citroen C5 II Break the drive shafts are usually different lengths because the gearbox is not mounted centrally in the vehicle. Always verify the fitting side before ordering.

Is it difficult to replace a drive shaft on a C5 II Break yourself?

It requires solid mechanical skills and the correct tools, including pullers and a torque wrench. On models fitted with hydraulic suspension, extra care must be taken when working near the suspension system.

Are CV boots and grease included when I buy a complete drive shaft?

Yes, our complete drive shafts are supplied fully assembled with inner and outer joints, CV boots and the correct amount of grease, ready for direct installation.

Why does the price vary between different drive shafts for the same model?

The price varies depending on the shaft dimensions and whether it is reinforced to handle the higher torque produced by larger diesel engines or V6 options, for example.

What does the fitment guarantee at CVJoint24 mean?

It means that when you select your vehicle by make, model and engine and order the recommended part, we guarantee that it will fit your car correctly.