Drive shafts for Citroen C5 III Break

To maintain dependable power transmission in your Citroen C5 III Break, you need a high-quality drive shaft tailored to the estate's specific chassis dimensions. Our range covers petrol...

Products for Drive shafts for Citroen C5 III Break

18 products
1 - 18 of 18
Item no.:1125116
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 620 mm
  • Joint diameter: 92 mm
Item no.:2170556
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 950 mm
  • Joint diameter: 90 mm
Item no.:2132000
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 998 mm
  • Joint diameter: 95 mm
Item no.:1170693
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 655 mm
  • Joint diameter: 95 mm
Item no.:2165087
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 958 mm
  • Joint diameter: 92 mm
Item no.:2175018
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 925 mm
  • Joint diameter: 100 mm
Item no.:112216
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Inner splines: 24
  • Total length: 670 mm
  • Diameter 1: 100 mm
Item no.:1118571
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 28
  • Total length: 661 mm
  • Joint diameter: 86 mm
Item no.:2188121
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 28
  • Total length: 870 mm
  • Joint diameter: 86 mm
Item no.:2119530
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 945 mm
  • Joint diameter: 92 mm
Item no.:212450
  • Position: Front
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 980 mm
  • Joint diameter: 92 mm
Item no.:1163254
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 670 mm
  • Joint diameter: 86 mm
Item no.:110931
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 650 mm
  • Joint diameter: 75 mm
Item no.:2141426
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 983 mm
  • Joint diameter: 100 mm
Item no.:1120396
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 640 mm
Item no.:1186369
  • Position: Front left
  • Splines gearbox side: 1
  • Splines wheel side: 1
  • Total length: 1 mm
Item no.:2108475
  • Position: Front right
  • Splines gearbox side: 1
  • Splines wheel side: 1
  • Total length: 1 mm
Item no.:110337
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Inner splines: 24
  • Total length: 670 mm
  • Diameter 1: 100 mm

Drive shafts for Citroen C5 III Break

The Citroen C5 III Break is renowned for its exceptional comfort and advanced suspension system, but transferring power from the engine smoothly to the road requires a robust, dependable drive shaft. At CVJoint24, we specialise in these critical drivetrain components. With extensive stock available for this model, we offer solutions for both petrol and diesel variants, whether you drive an economical 1.6 HDi or a muscular V6. A drive shaft for Citroen C5 III Break has to endure substantial stress, especially on high-torque diesel models where driveline loads peak during acceleration and when carrying heavy luggage in the estate compartment. Our driveshafts are manufactured to meet or exceed original equipment specifications, ensuring long service life and reliable driving dynamics.

What does the drive shaft do on a Citroen C5 III Break?

The primary job of the drive shaft on your Citroen C5 III Break is to transfer the torque generated by the engine and gearbox directly to the front wheels. Because this model is front-wheel drive, these shafts are essential for moving the vehicle forward. A complete drive shaft consists of a solid shaft bar fitted with CV joints at both ends. These constant velocity joints allow the shaft to transmit power at a steady rotational speed while absorbing the movements of the front suspension and steering angles. On a Citroen C5 III Break, frequently driven as a heavily loaded family estate or long-distance tourer, these parts work continuously to deliver smooth power regardless of road surface, cornering angles or load. Without a sound shaft, the car loses both propulsion and safety.

Common signs of wear

There are several typical warning signs that a drive shaft is wearing out on your Citroen C5 III Break. One of the most frequent symptoms is vibration felt through the steering wheel or throughout the bodywork under acceleration, which usually points to internal wear in the inner joint closest to the gearbox. If you instead hear a rhythmic clicking noise on full steering lock, such as when manoeuvring into a parking space, an outer CV joint is likely worn. You should also regularly inspect the CV boots; if these split, the lubricating grease escapes while road grit and water penetrate the joint. This rapidly causes premature wear of the moving internal components. Noticing grease splattered on the inside of the road wheel or in the wheel arch is a clear sign that a boot has split and the shaft requires immediate attention.

How to choose the correct drive shaft

Choosing the correct drive shaft for Citroen C5 III Break requires care, as technical specifications vary depending on engine size, gearbox type (manual or automatic) and exact model years. It is vital to check the precise overall length and the spline tooth counts at both ends to ensure proper fitment into the gearbox and the wheel hub. Certain models also require an integrated ABS ring fitted directly to the shaft. The most reliable way to select the right part is to filter by your car's exact make, model and engine variant in our shop. This ensures you find parts fully compatible with your vehicle's specific chassis and drivetrain, preventing incorrect orders and guaranteeing a hassle-free fit without modifications.

Related parts to inspect

We recommend checking these related categories for your vehicle when replacing a drive shaft:

When a driveline component shows signs of wear, neighbouring parts often require inspection as well. Comparing these exact pages for the Citroen C5 III Break makes it straightforward to determine whether an issue lies with the drive shaft itself or with an adjacent component in the drivetrain.

This is especially important on models where vibrations, play and unusual noises can easily travel between connected drivetrain components. A quick look at related categories reduces the risk of replacing one part while overlooking an adjacent component that causes the same symptoms.

Why choose CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying quality components from our central warehouse in Helsingborg, Sweden across the European Union. We understand the technical nuances of the Citroen C5 III Break and know how vital it is that every component meets rigorous standards to handle the car's demands. By focusing exclusively on driveline parts, we provide technical depth and expertise that general motor factors rarely match. We only stock products proven to withstand demanding European road conditions. With accurate vehicle filtering by make, model and engine, reliable EU shipping and knowledgeable customer support, you can be confident of receiving the right part. We help keep your Citroen running smoothly and safely for thousands of kilometres to come.

Frequently Asked Questions about Drive Shafts for Citroen C5 III Break

How do I know if my Citroen C5 III Break needs a new drive shaft?

The most common signs are vibrations through the car under acceleration, clicking noises when turning sharply, or visible damage and grease leaks from the drive shaft boots.

Is there a difference between the right and left drive shaft on this model?

Yes, the drive shafts differ in length between the right and left sides. The right-hand shaft is usually longer and often fitted with a centre bearing (intermediate bearing) to stabilise power delivery.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, provided the shaft itself is straight and undamaged, you can often save money by simply replacing the inner or outer CV joint if that is where the wear is located.

Does the same drive shaft fit all engines in the C5 III Break?

No, drive shafts vary depending on whether the car has a manual or automatic gearbox as well as the engine fitted (e.g. 1.6 HDi vs 2.0 HDi). Always select your car's exact make, model and engine to find the right part.

Why does my Citroen C5 III Break vibrate under acceleration?

Vibrations under acceleration are a classic symptom of a worn inner CV joint (closest to the gearbox) developing play, which creates an imbalance in the drivetrain.

Are CV boots and grease included when I buy a complete drive shaft?

Yes, when you buy a complete drive shaft from us, it arrives fully assembled with brand-new CV boots, grease and joints, ready to fit directly to the car.