Drive shafts for Citroen Grand C4

Find the right drive shaft for your Citroen Grand C4, whether you run a petrol or diesel engine. Discover a carefully chosen range suited to both 1.2 PureTech and BlueHDi models. Simply...

Products for Drive shafts for Citroen Grand C4

13 products
1 - 13 of 13
Item no.:1197741
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 662 mm
  • Joint diameter: 77 mm
Item no.:2180716
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 935 mm
  • Joint diameter: 77 mm
Item no.:1178917
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 688 mm
  • Diameter 1: 86 mm
Item no.:2167173
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 950 mm
  • Diameter 1: 86 mm
Item no.:1167575
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 696 mm
  • Joint diameter: 86 mm
Item no.:2171804
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 940 mm
  • Joint diameter: 86 mm
Item no.:2131832
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 945 mm
  • Joint diameter: 86 mm
Item no.:1112643
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 683 mm
  • Joint diameter: 86 mm
Item no.:2118945
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 953 mm
  • Diameter 1: 86 mm
Item no.:1127689
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 663 mm
  • Diameter 1: 95 mm
Item no.:2186829
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 965 mm
  • Diameter 1: 95 mm
Item no.:113387
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 627 mm
  • Diameter 1: 95 mm
  • Diameter 2: 89 mm
Item no.:2161723
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 980 mm
  • Diameter 1: 95 mm

Drive shafts for Citroen Grand C4

The Citroen Grand C4 is a spacious family car that places demanding loads on its drivetrain. The drive shaft is a critical component exposed to heavy stresses during everyday driving, especially when carrying heavy loads or negotiating stop-start city traffic. Here you will find a wide range of drive shafts engineered to withstand these challenges over the long term. We understand the importance of keeping your Citroen Grand C4 safe on the road, which is why we only offer components built to high standards and subject to rigorous quality inspections. Whether you have a petrol or diesel engine, fitting the correct drive shaft is vital to maintain the car's handling and prevent unnecessary wear on other drivetrain parts, saving you money in the long run.

What does the drive shaft do on a Citroen Grand C4?

The main task of the drive shaft on your Citroen Grand C4 is to transfer torque from the gearbox directly to the driven wheels. It is the component that actually turns engine power into forward motion when you press the accelerator. Because the Grand C4 is a front-wheel-drive vehicle, the drive shafts must also cope with wide steering angles and suspension travel whilst transferring power efficiently. This is made possible by the inner and outer CV joints situated at each end of the shaft, allowing multi-axis movement. A properly functioning drive shaft guarantees smooth power delivery and contributes to the quiet, supple ride for which Citroen is renowned. Without an intact shaft, your vehicle cannot drive effectively, which can lead to a complete breakdown mid-journey.

Common signs of wear

Several warning signs indicate that a drive shaft on your Citroen Grand C4 is failing. One of the most frequent symptoms is a clicking or knocking noise clearly heard during sharp turns at low speed, such as when parking. This typically points to a worn or damaged outer CV joint. Another common symptom is vibration through the steering wheel or the entire car under acceleration, which often stems from play in the inner joint or an unbalanced driveshaft. If you notice grease splattered across the inside of the wheel rim or around the wheel arch, a CV boot has split. If left unaddressed, dirt and moisture will penetrate, rapidly destroying the moving parts of the shaft and necessitating a complete replacement.

How to choose the correct drive shaft

Selecting the correct drive shafts for your Citroen Grand C4 requires care, as specifications vary according to engine size, gearbox type and production year. Key technical differences include the total length of the shaft, the spline tooth count at the ends, and whether the vehicle requires an integrated ABS ring on the shaft. To avoid ordering the wrong part, simply select your car's make, model and engine variant in our store. This automatically filters out incompatible parts to show components tailored to your vehicle. Remember to check whether you need the offside (right) or nearside (left) shaft, as they usually differ in length and design to accommodate the gearbox position.

Related parts to inspect

We recommend checking these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, neighbouring parts on the vehicle often require inspection as well. Comparing these exact pages for the Citroen Grand C4 makes it easier to determine whether an issue lies with the drive shaft itself or another nearby section of the drivetrain.

This is particularly relevant on models where vibrations, play and unusual noises can transfer symptoms across several driveline components. A quick look at related categories reduces the risk of replacing one part while overlooking another that contributes to the very same problem.

Inspecting these components together saves you both time and workshop costs over time.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying quality components across the European Union from our Helsingborg warehouse. We combine comprehensive technical expertise with a vast inventory to deliver dependable parts and a seamless shopping experience. Our focus is on precise fitment and OEM-level quality, which is especially crucial for complex components such as drive shafts for the Citroen Grand C4. By choosing your exact make, model and engine variant in our store, you eliminate guesswork and receive the right replacement first time. When you buy from us, you get components meticulously chosen to meet the demanding standards of European roads and modern motoring.

Frequently Asked Questions about Drive Shafts for Citroen Grand C4 - High Quality & Correct Fit

How do I know whether the right or left drive shaft is damaged on my Citroen Grand C4?

Typically, the noise is louder from the side under load. During a right-hand turn, the outer CV joint on the left side takes more load. However, vibrations during acceleration can be harder to pinpoint without a visual inspection underneath the car.

Do I need to replace both drive shafts at the same time?

No, there is no need to replace both at the same time. You usually only replace the side showing wear or faults. However, it is advisable to inspect the CV boots on the other side while the vehicle is raised.

What happens if I keep driving with a damaged drive shaft?

In the worst case, a damaged drive shaft can snap completely, causing the vehicle to lose drive and leaving you stranded. If a CV joint seizes, it can also cause the wheel to lock up or damage other suspension components.

Are CV joints included when I buy a complete drive shaft from you?

Yes, when you order a complete drive shaft from us, it is normally supplied with both the inner and outer CV joints as well as fitted CV boots, ready for direct installation on your Citroen Grand C4.

How long does it take to replace a drive shaft on this model?

For an experienced mechanic, it usually takes between 1 and 2 hours per side, depending on the condition of the car and whether any bolts are seized due to rust or corrosion.