Drive shafts for Citroen Jumpy

Find the correct drive shaft for your Citroen Jumpy across all body styles and engine options. Our range covers everything from early diesel models such as the 1.9 D and 1.9 TD to modern...

Products for Drive shafts for Citroen Jumpy

36 products
1 - 24 of 36
Item no.:2191446
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 950 mm
  • Joint diameter: 90 mm
Item no.:1128317
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 610 mm
  • Joint diameter: 90 mm
Item no.:2163732
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 998 mm
  • Joint diameter: 95 mm
Item no.:1166271
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 655 mm
  • Joint diameter: 95 mm
Item no.:1183151
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 685 mm
Item no.:2181406
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 989 mm
Item no.:1158406
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 641 mm
  • ABS teeth: 48
Item no.:7317164
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 641 mm
  • Joint diameter: 100 mm
Item no.:2167566
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 955 mm
  • ABS teeth: 48
Item no.:1142714
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 620 mm
  • Joint diameter: 92 mm
Item no.:2181456
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 958 mm
  • Joint diameter: 92 mm
Item no.:1180128
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 670 mm
  • Joint diameter: 86 mm
Item no.:1155326
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 647 mm
  • Joint diameter: 90 mm
Item no.:1105225
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 647 mm
  • ABS teeth: 48
Item no.:2151927
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 929 mm
  • Joint diameter: 90 mm
Item no.:2194457
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 929 mm
  • ABS teeth: 48
Item no.:1121328
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 732 mm
  • Joint diameter: 86 mm
Item no.:2101618
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 970 mm
  • Joint diameter: 86 mm
Item no.:1176565
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 676 mm
  • Seal ring diameter: 59 mm
Item no.:2101893
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 980 mm
  • Joint diameter: 92 mm
Item no.:214052
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 974 mm
  • Joint diameter: 86 mm
Item no.:116168
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 715 mm
  • Joint diameter: 86 mm
Item no.:7315738
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 955 mm
  • Joint diameter: 100 mm
Item no.:1108272
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 630 mm
  • ABS teeth: 48
Showing 1–24 of 36 products

Drive shafts for Citroen Jumpy

The Citroen Jumpy is a true workhorse, frequently subjected to heavy payloads and demanding driving conditions, which puts extreme demands on the vehicle's power transmission. The drive shaft is one of the most critical components in this system, responsible for transferring power directly from the gearbox to the wheels. At CVJoint24, you will find an extensive selection of drive shafts specifically developed to meet the technical specifications of your Citroen Jumpy. With numerous variants in our range, we offer solutions covering everything from the earliest generations to the very latest models.

Selecting the correct spare part for a commercial van is essential to minimise downtime. A faulty drive shaft can lead to consequential damage affecting both the gearbox and suspension. That is why we work exclusively with components of the highest standard. By focusing on specialist knowledge in All car makes drivetrains, we ensure that the parts we supply not only fit physically, but also perform reliably under the heavy strain of a fully loaded Jumpy in everyday use.

What does a drive shaft do on a Citroen Jumpy?

The primary job of the drive shaft on a Citroen Jumpy is to act as the final link in the drivetrain. It receives the torque generated by the engine and gearbox, translating it into rotational motion at the front wheels. Because the Jumpy is front-wheel drive, the drive shafts must accommodate both suspension travel and steering angles while simultaneously transmitting power. This is achieved via the inner and outer CV joints fitted at each end of the shaft.

The inner joint attaches to the gearbox and allows the shaft to move in and out as the suspension travels up and down. The outer joint, located at the wheel hub, allows the wheel to steer while maintaining consistent drive. For a Citroen Jumpy, frequently driven in stop-start urban traffic with tight cornering, these joints endure significant wear. A properly functioning drive shaft is therefore fundamental to vehicle handling and safety, especially under heavy loads where stress on the metal increases considerably.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Citroen Jumpy is reaching the end of its service life. One of the most common signs is a rhythmic clicking or knocking noise heard when making sharp turns at low speeds. This noise usually originates from the outer CV joint and is typically caused by escaping grease or dirt entering the joint. If you notice vibrations through the steering wheel or the entire bodywork during acceleration, an inner joint may be worn or out of balance.

Another vital warning sign is grease splattered across the inner wheel rim or suspension components. This almost always points to a split CV boot. Once the boot fails, the delicate bearings inside the constant velocity joint are exposed to road salt, water and grit, which quickly ruins the part. For Citroen Jumpy owners, regular driveshaft inspections are well worthwhile; catching a damaged boot early can save you the cost of a complete drive shaft replacement by simply fitting a new boot kit and fresh grease.

How to choose the right drive shaft

Identifying the exact drive shaft for your Citroen Jumpy can be challenging due to variations across engine sizes, gearbox types and model years. Parameters such as total shaft length, spline tooth counts (both gearbox-side and wheel-hub-side), and whether the vehicle has an ABS system are all critical. A drive shaft for a 1.6 HDi can differ markedly from one for a 2.0 HDi, even if the vehicles look identical from the outside.

To make your selection simple and reliable, you can easily filter our catalogue by your vehicle's make, model and engine variant. This ensures you only see parts that are technically compatible with your vehicle. However, it is always recommended to verify whether your vehicle requires an ABS ring mounted directly on the drive shaft, as certain variants rely on this for the braking system to function correctly. If in doubt, we also suggest comparing your existing shaft's length and spline count with the detailed specifications in our product listing.

Related parts to check

Be sure to also inspect these exact pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, adjacent parts on the vehicle often warrant inspection too. By comparing these exact pages for the Citroen Jumpy, it becomes easier to determine whether an issue lies with the drive shaft itself or with a neighbouring transmission part.

This is particularly relevant on models where vibrations, play and unwanted noises can transfer between multiple parts in the same driveline. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent part that causes the same symptom.

By conducting a thorough inspection of these related components, you reduce the risk of having to strip down the front suspension again in the near future. A comprehensive drivetrain overhaul delivers greater peace of mind and better overall running economy.

Why buy from CVJoint24?

CVJoint24 is not just another general car parts retailer; we are a dedicated Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden. Our strength lies in deep catalogue expertise and a commitment to providing the correct part for every vehicle. For Citroen Jumpy owners, this means we understand the exact technical details separating each model variant. We know commercial vans must stay on the road, which is why we prioritise high availability and fast dispatch across Europe.

When you order from us, you benefit from specialist technical knowledge and customer support that genuinely understands the practical challenges of replacing a drive shaft. We combine an extensive range with the reliability of a dedicated Scandinavian specialist. By selecting your exact make, model and engine, you can be completely confident that the drive shaft you order will fit your Citroen Jumpy perfectly and deliver trouble-free motoring for many kilometres to come.

Frequently Asked Questions about Drive Shafts for Citroen Jumpy – Quality Parts for Your Van

How do I know which drive shaft fits my Citroen Jumpy?

The easiest and most reliable way is to select your vehicle by make, model and engine variant in our store. With 27 different variants depending on the engine, gearbox and model year, this ensures you get a shaft with the correct length and spline count.

What are the most common symptoms of a failing drive shaft?

The most common signs are clicking noises on full steering lock, vibrations under acceleration, or visible grease leaks from torn CV boots. If the vibrations are severe, the shaft should be replaced immediately.

Do I need to replace both drive shafts at the same time?

No, there is no requirement to replace both at the same time. However, they often wear at a similar rate, so if one side has failed, it is wise to at least inspect the CV boots on the opposite side.

Are CV joints included when I buy a complete drive shaft?

Yes, when you order a complete drive shaft from us, it arrives fully assembled with both the inner and outer CV joint as well as boots, ready for direct installation on your Citroen Jumpy.

Why does my Citroen Jumpy vibrate under acceleration?

Vibrations under acceleration are often caused by wear in the inner CV joint. On a commercial vehicle like the Jumpy, this can be aggravated under heavy loads as the operating angles of the drive shaft change.

Is it difficult to replace a drive shaft on a Jumpy yourself?

It requires some mechanical experience and the correct tools, such as a large socket for the hub nut and tools to separate the ball joint. If you are unsure, professional help is recommended, but for an experienced DIY mechanic, it is a straightforward job.

Do I have to change the gearbox oil when replacing a drive shaft?

Yes, on most Citroen Jumpy models gearbox oil will drain out when you pull the inner drive shaft out of the transmission. It is therefore the perfect opportunity to refill with fresh gearbox oil.