Drive shafts for Citroen Visa

Looking for a replacement drive shaft for your Citroen Visa? As an international Swedish driveline specialist shipping across the EU, we supply vehicle-specific components that ensure...

Products for Drive shafts for Citroen Visa

5 products
1 - 5 of 5
Item no.:317032
  • Position: Front
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 683 mm
  • Joint diameter: 75 mm
Item no.:313574
  • Position: Front
  • Splines wheel side: 21
  • Total length: 584 mm
  • Joint diameter: 75 mm
  • Joint diameter, gearbox side: 115 mm
Item no.:319199
  • Position: Front
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 684 mm
  • Joint diameter: 75 mm
Item no.:1171974
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 21
  • Total length: 565 mm
  • Joint diameter: 84 mm
Item no.:2185500
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 21
  • Total length: 840 mm
  • Joint diameter: 84 mm

Drive shafts for Citroen Visa

The Citroen Visa is an iconic small car that requires specific spare parts to maintain its roadworthiness and vintage charm. The drive shaft is an absolutely critical component of the car's power transmission, especially on a front-wheel-drive car like the Visa where the front axle handles both propulsion and steering. Because this model was produced during a period of rapid technical development, several mechanical variations exist depending on whether your car is powered by a petrol engine or the popular diesel variant. At CVJoint24, you will find a carefully curated range that meets the high standards required for your Citroen Visa. We focus on supplying parts that combine modern durability with precise historic fitment, which is essential to avoid future vibration issues or expensive drivetrain noises.

What does a drive shaft do on a Citroen Visa?

The main task of the drive shaft on a Citroen Visa is to transfer the torque generated by the engine, via the gearbox, directly out to the front wheels. It is the final link in the drivetrain that allows the vehicle to move forwards and backwards. Since the Citroen Visa is front-wheel drive, the drive shaft must be exceptionally flexible. It must not only transmit power under continuous rotation, but also accommodate vertical suspension movement and wide steering angles when cornering. This is made possible by sophisticated CV joints located at either end of the shaft. A properly functioning driveshaft ensures power is transferred smoothly, quietly and without mechanical loss. This not only delivers a comfortable ride, but also minimises secondary wear on the gearbox output shafts and wheel bearings. Without an intact drive shaft your Citroen will be immobilised, as no drive can reach the road regardless of how smoothly the engine runs.

Common signs of wear

Several distinct warning signs indicate that the drive shaft on your Citroen Visa is worn or damaged. One of the most common symptoms is a clicking or knocking noise clearly audible when making sharp turns at low speed, such as when parking. This typically points to a worn outer CV joint. Another telltale sign is vibration through the steering wheel or the entire car during acceleration, which suggests an issue with the inner joint or an unbalanced shaft. Finding grease splattered on the inside of the wheel rim or around the wheel arch is a critical warning that a CV boot has split. Once the boot tears, dirt and moisture penetrate the joint while lubricating grease escapes, rapidly leading to complete failure. Ignoring these symptoms can cause the shaft to snap entirely, causing an immediate loss of drive.

Choosing the right drive shaft

Selecting the correct drive shaft for your Citroen Visa requires attention to detail, as significant variations exist across different engine variants and model years. For instance, driveshafts often differ between the smaller petrol engines and the heavier 17 D diesel, owing to differences in torque ratings and gearbox mountings. Key measurements to confirm prior to purchasing include the shaft's overall compressed length and the spline tooth counts at both the inner and outer ends. It is also important to note whether the vehicle is equipped with ABS—though rare on early Visa models—as this affects the shaft's configuration. To ensure a simple and secure purchase, select your Citroen Visa's exact make, model and engine variant in our vehicle selector. This filters for parts technically compatible with your specific car, eliminating the risk of ordering the wrong component and ensuring a straightforward installation without modifications.

Related parts to inspect

Be sure to check these dedicated pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, neighbouring parts on the vehicle often require inspection too. By comparing these exact pages for your Citroen Visa, it becomes easier to determine whether the problem lies with the drive shaft itself or another related component in the transmission system.

This is particularly relevant on models where vibrations, play and unwanted noises can travel between several parts of the same drivetrain. A quick check of related categories reduces the risk of replacing one component while missing an adjacent worn part causing the same symptoms.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, operating with central warehouse facilities in Helsingborg, Sweden, and shipping across the European Union. We understand that your Citroen Visa deserves premium replacement parts to remain safely on the road, which is why we offer a comprehensive fitment guarantee on all our drive shafts. Backed by extensive technical expertise and a product catalogue focused specifically on driveline components, we deliver quality designed to match or exceed the durability of original parts. When a part fails, you need a replacement quickly; we process orders promptly to ensure swift delivery across the EU. Choosing CVJoint24 means securing high-grade car parts along with expert technical guidance to get the right component first time, keeping your classic car running reliably.

Frequently asked questions about drive shafts for Citroen Visa

How do I know if my Citroen Visa needs a new drive shaft?

The most common signs are clicking noises when cornering, vibrations under acceleration, or visible grease leaks from damaged CV boots.

Can I replace just the CV joint instead of the entire shaft?

Yes, if the shaft bar itself is straight and undamaged, you can often replace just the inner or outer CV joint to save money.

Does the same drive shaft fit all Citroen Visa models?

No, there are differences depending on engine size and model year. Always select your vehicle make, model and engine to find the exact replacement part.

What is included when I buy a drive shaft from you?

Our drive shafts are supplied complete and ready to fit, usually including joints, CV boots and the necessary mounting hardware.

How quickly will my Citroen Visa drive shaft be delivered?

We aim to dispatch your order straight away and offer fast shipping so you can get your car back on the road without delay.

Why is it important to check the CV boot regularly?

The CV boot protects the joint from dirt and water. A split boot quickly leads to premature joint wear, which can mean replacing the entire drive shaft.