Drive shafts for Fiat Punto

Find the right drive shaft for your Fiat Punto in our extensive range, covering everything from agile petrol engines to diesel hatchbacks and convertibles. By selecting your car's make,...

Products for Drive shafts for Fiat Punto

74 products
1 - 24 of 74
Item no.:111069
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 611 mm
  • Joint diameter: 76 mm
Item no.:2173206
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 841 mm
  • Joint diameter: 76 mm
Item no.:1140306
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 646 mm
  • Joint diameter: 76 mm
Item no.:2165013
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 870 mm
  • Joint diameter: 80 mm
Item no.:214639
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 870 mm
  • ABS teeth: 44
Item no.:112616
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 586 mm
  • Joint diameter: 80 mm
Item no.:113570
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 586 mm
  • ABS teeth: 44
Item no.:1114921
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 585 mm
  • ABS teeth: 44
Item no.:2109673
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 870 mm
  • ABS teeth: 44
Item no.:2180589
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 498 mm
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:1186161
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 22
  • Total length: 508 mm
  • Joint diameter: 80 mm
Item no.:2183288
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 22
  • Total length: 824 mm
  • Joint diameter: 80 mm
Item no.:1157091
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 22
  • Joint diameter: 80 mm
  • ABS teeth: 44
Item no.:2128125
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 22
  • Joint diameter: 80 mm
  • ABS teeth: 44
Item no.:2191987
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 24
  • Total length: 910 mm
Item no.:7302010
  • Position: Front right
  • Splines wheel side: 25
  • Total length: 497 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 89 mm
Item no.:2166855
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 910 mm
  • Joint diameter: 82 mm
Item no.:1164563
  • Splines wheel side: 25
  • Total length: 515 mm
  • Seal ring diameter: 51 mm
Item no.:114738
  • Position: Front left
  • Splines gearbox side: 23
  • Splines wheel side: 22
  • Total length: 511 mm
  • Diameter 1: 76 mm
Item no.:210517
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 842 mm
Item no.:115975
  • Position: Front left
  • Splines wheel side: 25
  • Total length: 457 mm
  • Joint diameter: 89 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2138131
  • Position: Front right
  • Splines gearbox side: 23
  • Splines wheel side: 22
  • Total length: 815 mm
  • Joint diameter: 76 mm
Item no.:1187121
  • Position: Front left
  • Splines wheel side: 25
  • Total length: 435 mm
  • Joint diameter: 89 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2146845
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 886 mm
  • Joint diameter: 76 mm
Showing 1–24 of 74 products

Drive shafts for Fiat Punto

The Fiat Punto is a popular small car that requires reliable components to retain its agility in city traffic. The drive shaft is a critical link in the vehicle's powertrain, and with us you will find options that meet or exceed original equipment specifications. Our range for this model covers a broad spectrum of engine options and model years. Investing in a quality-assured drive shaft means not only a safer journey but also a more durable solution over time. We focus on offering parts engineered to withstand the stresses of everyday driving, from stop-start urban traffic to motorway speeds. Every component is carefully selected to suit the specific requirements of your Fiat.

What does the drive shaft do on a Fiat Punto?

The primary job of the drive shaft on a front-wheel-drive car like the Fiat Punto is to transfer torque from the gearbox to the front wheels. It must handle both suspension travel and steering angles whilst rotating at high speed. The driveshaft assembly consists of the shaft itself, an outer CV joint at the wheel hub, and an inner CV joint at the gearbox. This design ensures constant power transmission regardless of the steering angle. Without a functioning drive shaft, the car cannot move forward, as engine power never reaches the road. It is a precision-engineered mechanical part requiring exact balancing to prevent vibrations and unnecessary wear on surrounding suspension components.

Common signs of wear

Several warning signs indicate that a drive shaft on your Fiat Punto is beginning to fail. One of the most frequent symptoms is a clicking or knocking noise on tight turns, which typically points to a worn outer joint. If you notice vibrations through the steering wheel or the entire bodywork under acceleration, the inner constant velocity joint is often the culprit. Another clear indicator is grease splattered inside the wheel rim or around the wheel arch, caused by a split CV boot. Once the boot fails, dirt gets in and the lubricating grease escapes, quickly leading to complete drive shaft failure. Ignoring these symptoms can result in a breakdown that leaves the car stranded in traffic, which can be both costly and dangerous.

Choosing the right drive shaft

Selecting the correct drive shaft for your Fiat Punto can be tricky, as specifications vary according to engine capacity, gearbox type, and whether the vehicle has ABS. The most reliable way to find the correct part is to select your car's make, model, and engine variant in our shop. This filters out the products that are technically compatible with your vehicle's exact setup. Always check the spline tooth count on the ABS ring if your vehicle has one fitted directly to the shaft. Lengths can also differ between the left and right sides, as one shaft is typically longer to reach the passenger-side wheel. Taking care with technical details ensures you avoid costly returns and enjoy a much smoother installation in the garage.

Related parts to inspect

Please also check these exact pages for the same car when working on the drive shaft:

When a driveline component shows signs of wear, neighbouring parts on the same car often warrant an inspection as well. Comparing these exact pages for Fiat Punto makes it simpler to establish whether the fault lies in the drive shaft itself or in another adjacent section of the drivetrain.

This is particularly relevant on models where vibrations, play, and noises can shift symptoms across several parts in the same drivetrain. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent part that contributes to the very same issue.

Replacing these parts preventatively can save both time and money in the long run, especially if you have already dismantled the suspension to reach the drive shaft. A complete overhaul gives you total peace of mind on the road.

Why buy from cvjoint24.com?

CVJoint24 is the international shop of a Swedish driveline specialist with its warehouse in Helsingborg, Sweden. We combine deep technical knowledge with a range defined by exceptional quality and precision. By focusing exclusively on driveline components, we deliver expertise that general car parts stores simply cannot match. Our catalogue is structured to help you select the exact spare parts for your Fiat Punto by make, model, and engine variant. We understand the importance of fast dispatch and an accurate fit so you can get your car back on the road without delay. When you choose us, you get far more than just a replacement part: you gain access to a dedicated specialist passionate about reliable drivetrains and satisfied customers across Europe.

Frequently Asked Questions about Drive Shafts for Fiat Punto – Find the Right Part for Your Car

How do I know whether to replace the entire drive shaft or just a CV joint?

If the shaft bar itself is straight and the splines are undamaged, replacing just the worn CV joint is often sufficient. However, if there is severe rust, imbalance, or multiple components on the shaft are worn, a complete drive shaft is a safer and often more cost-effective solution.

Does the same drive shaft fit both the right and left sides of a Fiat Punto?

Usually not. On the Fiat Punto, as on most front-wheel-drive cars, the gearbox is positioned off-centre, which means the drive shafts are different lengths on the right and left sides.

What happens if I continue driving with a broken drive shaft?

In the worst-case scenario, the car loses drive completely and leaves you stranded. A damaged driveshaft that breaks away while driving can also cause extensive consequential damage to the suspension, brake hoses, and gearbox.

Is an ABS ring included when I buy a complete drive shaft for my Punto?

This varies depending on the specific item. In our shop, the product description clearly states whether the ABS ring is pre-fitted to the drive shaft or not.

Why do vibrations occur during acceleration after replacing a drive shaft?

Vibrations can occur if the inner joint has not seated properly in the gearbox, if the shaft is out of balance, or if worn engine mounts are negatively affecting the working angle of the shaft.

Do I need to top up the gearbox oil when replacing a drive shaft?

Yes, on most Fiat Punto models, gearbox oil drains out when you pull out the inner CV joint. It is therefore an ideal opportunity to check the level and completely replace the oil if necessary.