Drive shafts for Fiat Scudo

Are you looking for a high-quality drive shaft for your Fiat Scudo? As a Swedish drivetrain specialist, we provide a broad range of model-tailored drive shafts that ensure optimal power...

Products for Drive shafts for Fiat Scudo

20 products
1 - 20 of 20
Item no.:2124884
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 998 mm
  • Joint diameter: 95 mm
Item no.:1140144
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 610 mm
  • Joint diameter: 90 mm
Item no.:1151753
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 655 mm
  • Joint diameter: 95 mm
Item no.:1174351
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 641 mm
  • ABS teeth: 48
Item no.:2136395
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 955 mm
  • ABS teeth: 48
Item no.:2117302
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 958 mm
  • Joint diameter: 92 mm
Item no.:1119115
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 670 mm
  • Joint diameter: 86 mm
Item no.:1121677
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 676 mm
  • Seal ring diameter: 59 mm
Item no.:2174772
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 980 mm
  • Joint diameter: 92 mm
Item no.:7315741
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 955 mm
  • Joint diameter: 100 mm
Item no.:1107101
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 630 mm
  • ABS teeth: 48
Item no.:7302826
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 647 mm
  • ABS teeth: 48
Item no.:7317187
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 641 mm
  • Joint diameter: 100 mm
Item no.:2146159
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 929 mm
  • ABS teeth: 48
Item no.:216931
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 943 mm
  • Joint diameter: 100 mm
Item no.:7314345
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 641 mm
  • Joint diameter: 100 mm
Item no.:1173032
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 647 mm
  • Joint diameter: 90 mm
Item no.:2199828
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 929 mm
  • Joint diameter: 90 mm
Item no.:210804
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 980 mm
  • Thread size: M24x1.5
Item no.:211814
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 974 mm
  • Joint diameter: 86 mm

Drive shafts for Fiat Scudo

Maintaining the drivetrain on a Fiat Scudo is essential for preserving the vehicle's reliability and performance, especially as these vehicles are frequently used in demanding commercial operation. A drive shaft for Fiat Scudo must withstand high torque and constant loads throughout long working days. At CVJoint24, we specialise in these very components to provide you with parts that meet or exceed original equipment specifications. With several variants in our range, we offer solutions for everything from early model years through to the latest generations.

Our focus is on supplying components tailored precisely to your vehicle's unique configuration. Because the Scudo comes in numerous executions, including different engine options and payload capacities, it is vital to select a drive shaft engineered for your specific vehicle's power transmission. By choosing a specialist like us, you gain access to in-depth technical expertise and a product range carefully curated for demanding European driving conditions.

What does a drive shaft do on a Fiat Scudo?

The drive shaft on a Fiat Scudo performs the crucial task of transferring rotational energy from the gearbox directly to the front wheels. This enables the vehicle to move forwards and backwards with maintained control. On a front-wheel-drive vehicle like the Scudo, the drive shafts are also designed to accommodate the angular variations that occur when steering and whilst the suspension articulates. This places exceptionally high demands on the built-in CV joints positioned at either end of the shaft.

Beyond pure power transfer, the drive shaft acts as a link that must absorb certain vibrations and road surface irregularities to protect the gearbox. A smoothly functioning driveshaft contributes to a refined driving experience and minimises wear on other drivetrain parts. If the shaft becomes bent or the joints wear out, not only is comfort compromised, but safety and the vehicle's overall ability to progress efficiently are also impaired.

Common symptoms of wear

There are several distinct symptoms indicating that it is time to inspect the drive shafts on your Fiat Scudo. One of the most frequent indicators is vibration arising during acceleration, which typically points to imbalance or play in the inner constant velocity joint near the gearbox. If you instead hear a clicking or knocking noise when taking sharp corners at low speeds, the outer CV joint is generally failing due to contamination or a lack of grease.

Another key sign to watch for is grease splattered across the inside of the wheel rim or around the wheel arch. This is almost exclusively caused by a split CV boot, which allows lubricating grease to be flung out whilst dirt penetrates the joint. Caught early enough, replacing solely the boot may suffice, but wear has often already progressed to the point where the complete drive shaft or CV joint must be replaced to ensure long-term durability.

How to choose the correct drive shaft

Choosing the correct drive shaft for Fiat Scudo demands precision because specifications vary depending on engine size, gearbox type, and whether the vehicle is equipped with an ABS system. The key differences between shafts lie in total length, spline count at both ends, and whether an ABS ring is pre-installed. Counting splines and measuring length are dependable methods to verify fitment, though the simplest approach is consulting your vehicle's technical details.

To simplify the selection process, our shop allows you to filter by your vehicle's make, model, and engine variant. By selecting your specific Fiat Scudo, our catalogue updates to show only the components that match your exact van. This minimises the risk of incorrect orders and ensures you receive a part that fits directly upon installation. Should you remain uncertain, our knowledgeable customer support team is always on hand to assist with technical queries.

Related parts to inspect

Feel free to inspect these exact pages for the same vehicle when working on the drive shaft:

When a drivetrain component displays wear, adjacent parts on the vehicle often warrant inspection as well. Comparing these exact pages for Fiat Scudo makes it straightforward to determine whether an issue lies with the drive shaft itself or another neighbouring part within the power transmission.

This is particularly relevant on models where vibrations, play, and noises can shift symptoms across several interconnected drivetrain parts. A swift check of related categories reduces the likelihood of replacing the correct component type while overlooking an adjacent part that shares the same defect profile.

Why purchase from CVJoint24?

CVJoint24 is your dedicated partner when it comes to power transmission spare parts. As a Swedish driveline specialist shipping across the EU, we deliver a unique combination of extensive inventory and technical knowledge that general car parts retailers rarely match. We understand the distinct demands of the Fiat Scudo and have selected our parts to endure demanding commercial use and harsh European conditions.

Shopping with us provides not just quality car parts, but also the assurance of our accurate fitment guarantee. We aim to help you identify the right component on the first attempt, minimising vehicle downtime so your van gets back on the road promptly. Our goal is always to deliver the right part at the right price, supported by customer service experts who truly understand drivetrains. Choose quality and expertise for your Fiat Scudo – choose CVJoint24.

Frequently Asked Questions about Drive Shafts for Fiat Scudo

How do I know if my Fiat Scudo needs a new drive shaft?

The most common signs are vibrations in the steering wheel or bodywork during acceleration, as well as clicking noises when cornering. You should also check whether the CV boots are split or if there are grease splatters around the wheel arches.

Does the same drive shaft fit all Fiat Scudo models?

No, drive shafts vary depending on the engine, gearbox and model year. It is essential to check the overall length, spline count and whether the shaft features an ABS ring before ordering.

How do I find the correct drive shaft for my vehicle?

Using our vehicle selector to choose your Fiat Scudo model, year and engine variant is the most reliable way to filter for drive shafts that fit your specific van.

What is included when I buy a complete drive shaft from you?

Our complete drive shafts arrive fully assembled with inner and outer CV joints, CV boots and the necessary fitting accessories to ensure a quick and straightforward replacement.

Why does my Fiat Scudo vibrate under acceleration?

Vibrations under load are often caused by wear in the inner CV joint or an imbalance in the drive shaft itself. On the longer side, a worn centre bearing can also be the culprit.

How does your fitment guarantee work for Fiat Scudo?

Our fitment guarantee means that if you select your vehicle's make, model and engine variant and the part unexpectedly does not fit, we will help you promptly source the correct replacement without any hassle.