Drive shafts for Ford Tourneo Connect Grand Tourneo Connect
Find the right drive shaft for your Ford Tourneo Connect or Grand Tourneo Connect by selecting your car's model and engine. Our range includes precision-engineered components for...
Products for Drive shafts for Ford Tourneo Connect Grand Tourneo Connect
- Position: Front left
- Total length: 653 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Front right
- Total length: 984 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Front right
- Total length: 983 mm
- Splines gearbox side: 28
- Splines wheel side: 27
- Position: Front left
- Total length: 635 mm
- Splines gearbox side: 28
- Splines wheel side: 27
- Position: Front left
- Total length: 944 mm
- Splines gearbox side: 35
- Splines wheel side: 27
- Diameter 1: 87 mm
- Position: Front left
- Total length: 645 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Front right
- Total length: 982 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Diameter 1: 87 mm
- Position: Front right
- Inner splines: 33
- Total length: 981 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Front left
- Total length: 648 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Front left
- Total length: 635 mm
- Splines gearbox side: 28
- Splines wheel side: 27
- Diameter 1: 87 mm
- Position: Front right
- Total length: 985 mm
- Splines gearbox side: 28
- Splines wheel side: 27
- Diameter 1: 87 mm
- Position: Front left
- Total length: 648 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Front right
- Inner splines: 35
- Total length: 982 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Front left
- Total length: 645 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Front right
- Total length: 983 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Front left
- Total length: 943 mm
- Splines gearbox side: 35
- Splines wheel side: 27
- Diameter 1: 87 mm
- Position: Front left
- Total length: 650 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Front right
- Total length: 980 mm
- Splines gearbox side: 26
- Splines wheel side: 27
- Position: Front right
- Total length: 558 mm
- Splines gearbox side: 28
- Splines wheel side: 27
- Position: Front right
- Splines wheel side: 27
- Diameter 1: 87 mm
- Position: Front right
- Total length: 985 mm
- Splines gearbox side: 26
- Splines wheel side: 27
Drive shafts for Ford Tourneo Connect Grand Tourneo Connect
The Ford Tourneo Connect and the longer Grand Tourneo Connect are robust vehicles that frequently encounter demanding driving conditions, whether serving as spacious family cars or in daily commercial use. The drive shaft is a critical drivetrain component that must withstand substantial stress over time, especially under heavy payloads or during stop-and-start urban driving. At CVJoint24, you will find model-tailored drive shafts that meet or exceed original specifications for your Ford. We understand the importance of minimising your vehicle's downtime, which is why we only supply parts with guaranteed fitment. By choosing the correct components for your Ford, you ensure engine torque reaches the road wheels efficiently without causing unnecessary wear on the rest of the drivetrain.
What does the drive shaft do on a Ford Tourneo Connect Grand Tourneo Connect?
The primary role of the drive shaft on a Ford Tourneo Connect or Grand Tourneo Connect is to transfer torque from the gearbox to the driven wheels. Because these models are typically front-wheel drive, a drive shaft is fitted to each side at the front. The shaft consists of a solid bar with CV joints at both ends, allowing both suspension movement and wide steering angles while transmitting power continuously. For the Grand model, with its longer wheelbase and often higher payload capacity, it is especially important that the driveshaft is properly dimensioned to handle the increased load. A fully functioning shaft is vital for a smooth, vibration-free ride, which is particularly evident during acceleration and on uneven road surfaces where the drivetrain works hard.
Common signs of wear
Several distinct symptoms indicate that a drive shaft on your Ford is becoming worn or damaged. One of the most common signs is vibration felt through the steering wheel or the entire bodywork during acceleration, which typically points to wear in the inner CV joint. If you hear a clicking or knocking sound on full steering lock at low speeds, this usually indicates a failing outer CV joint. Another critical warning sign is grease or oil splattered on the inside of the wheel rim, indicating a split CV boot. Once the boot fails, dirt penetrates and the grease is lost, quickly causing the entire shaft assembly to fail. Ignoring these symptoms can ultimately lead to a complete breakdown, leaving you stranded.
How to choose the correct drive shaft
Choosing the correct drive shaft for your Ford Tourneo Connect Grand Tourneo Connect demands precision, as specifications vary considerably. Differences exist depending on whether the vehicle has a manual or automatic gearbox, as well as between different engine variants such as the 1.5 or 1.6 TDCi. The most reliable way to find the right part is to select your Ford make, model and engine variant in our vehicle selector. You should also check the total length of the shaft and the spline counts on both the inner and outer ends when verifying manually. The right-hand side often uses a longer shaft fitted with an intermediate centre bearing that should also be inspected. Our catalogue filters the products matching your specific vehicle variant to prevent incorrect orders and ensure straightforward installation.
Related parts to check
You may also wish to check these exact pages for the same vehicle when working on the drive shaft:
When one drivetrain component shows signs of wear, related parts on the same car often require inspection too. Comparing these exact pages for the Ford Tourneo Connect Grand Tourneo Connect makes it easier to determine whether an issue lies with the drive shaft itself or another related part of the power transmission.
This is particularly relevant for models where vibrations, play and unusual noises can shift symptoms across several interconnected drivetrain parts. A quick check of related categories reduces the risk of replacing one correct part while overlooking an adjacent component that causes the same underlying fault.
- Ford Tourneo Connect Grand Tourneo Connect
- Outer CV joints for Ford Tourneo Connect Grand Tourneo Connect
- Propeller shafts for Ford Tourneo Connect Grand Tourneo Connect
Why shop with CVJoint24?
CVJoint24 is the international shop of a Swedish driveline specialist, supplying a comprehensive range of parts for Ford models from our central Swedish warehouse across the EU. We combine technical expertise with premium car parts to deliver the ideal solution for your Ford Tourneo Connect Grand Tourneo Connect. Our strength lies in extensive category knowledge and ensuring correct fitment when you select your vehicle details, giving you complete confidence in your purchase. We understand the technical demands of modern drivetrains and supply only components built to endure European roads and harsh climates. With our support, you receive the right spare parts swiftly and efficiently, restoring safe, stable driving free from vibrations, noises or the threat of sudden failure.
Frequently Asked Questions about Drive Shafts for Ford Tourneo Connect & Grand Tourneo Connect
How do I know if the drive shaft fits my Ford Tourneo Connect?
The easiest and most reliable way is to select your vehicle's make, model, and engine variant in our search filter. This will display only the drive shafts that are fully compatible with your specific car.
What are the most common symptoms of a worn drive shaft?
The most common signs are vibrations during acceleration, clicking noises when cornering sharply, and grease leaking from damaged CV boots. If the vibrations disappear when you lift off the accelerator, the inner CV joint is often the worn component.
Is there a difference in drive shafts between the Grand Tourneo and the standard Connect model?
Yes, differences in length and dimensions can occur depending on the wheelbase and engine options. Always select your specific model and engine variant to ensure you receive the correct version for your vehicle.
Do I need to replace both drive shafts at the same time?
No, it is not necessary to replace both drive shafts if only one has failed. However, they do wear at a similar rate, so it is always sensible to inspect the CV boots and joints on the other side at the same time.
Are CV joints and boots included when I purchase a complete drive shaft?
Yes, when you purchase a complete drive shaft from us, it arrives fully assembled with both inner and outer CV joints, as well as the CV boots, ready for direct installation on your vehicle.
Why does my Ford vibrate during acceleration but not at a steady cruise?
This is a classic symptom of a worn inner CV joint on the drive shaft. Under engine load, play within the joint causes noticeable vibrations that transmit through the entire car.