Drive shafts for Honda

Discover a comprehensive selection of drive shafts tailored for Honda models, spanning petrol, diesel, and hybrid powertrains. The range includes components for front-wheel drive and...

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Drive shafts for Honda

911 products
673 - 696 of 911
Item no.:211833
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 695 mm
Item no.:116643
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 894 mm
  • ABS teeth: 50
Item no.:2158392
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 613 mm
  • ABS teeth: 50
Item no.:112770
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 668 mm
  • Diameter 1: 94 mm
Item no.:1166794
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 660 mm
Item no.:1195135
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 910 mm
  • ABS teeth: 50
Item no.:116995
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 685 mm
Item no.:2117022
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 624 mm
  • Joint diameter: 86 mm
Item no.:7306150
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 624 mm
  • ABS teeth: 50
Item no.:0125241
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 442 mm
Item no.:1104633
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 986 mm
  • ABS teeth: 50
Item no.:2146446
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 621 mm
  • ABS teeth: 50
Item no.:1190265
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 618 mm
  • ABS teeth: 50
Item no.:7304168
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 602 mm
  • Joint diameter: 89 mm
Item no.:119231
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 918 mm
  • Joint diameter: 79 mm
Item no.:219413
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 610 mm
  • Joint diameter: 82 mm
Item no.:318642
  • Position: Front
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 956 mm
  • Joint diameter: 92 mm
Item no.:1175279
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 956 mm
  • ABS teeth: 50
Item no.:1174934
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 28
  • Total length: 597 mm
  • ABS teeth: 50
Item no.:1110707
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • Total length: 910 mm
  • Joint diameter: 86 mm
Item no.:2170986
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 572 mm
  • ABS teeth: 50
Item no.:213929
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 574 mm
Item no.:1188428
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 924 mm
  • ABS teeth: 50
Item no.:1176334
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • Total length: 924 mm
  • Joint diameter: 83 mm
Showing 673–696 of 911 products

Drive shafts for Honda

Honda has long been synonymous with engineering innovation and high reliability, especially when it comes to their advanced drivetrains. A drive shaft for Honda is a critical component responsible for transferring torque from the gearbox directly to the wheels. Because Honda often utilises front-wheel drive (FWD) or the intelligent Real Time AWD all-wheel drive system, extremely high demands are placed on drive shafts to handle both sharp acceleration and wide steering angles without losing efficiency. With us, you will find a curated range covering everything from classic models to the latest hybrid variants.

Choosing the correct component is essential to preserve the driving feel that Honda is renowned for. An undersized or incorrectly designed shaft can cause imbalance and unnecessary wear on other drivetrain parts. At cvjoint24.com, we understand these nuances and supply only parts that meet or exceed the technical specifications required for your car. By focusing on material quality and manufacturing precision, we ensure that every drive shaft withstands the stresses of both city driving and motorway speeds.

How drive shafts differ between Honda models

Honda’s model range is diverse, meaning driveshaft designs vary considerably depending on the vehicle's purpose and drivetrain. A Honda Civic, typically lighter and focused on agility, uses drive shafts engineered to be lightweight yet torsionally stiff. Conversely, a Honda CR-V, with its higher ground clearance and all-wheel drive, requires shafts capable of accommodating greater suspension angles and tougher driving conditions. It is common for the shaft length to differ between the left and right sides owing to the gearbox position, making it vital to confirm precisely which side requires replacement.

Beyond physical dimensions, the spline count (the teeth at the ends of the shaft) varies across generations and engine options. A Honda Accord with a torquey diesel engine often features coarser splines and a beefier shaft than a smaller petrol model to manage the higher torque output. Furthermore, older Honda models frequently feature the ABS ring fitted directly to the outer CV joint, whereas modern models integrate this into the wheel bearing. These technical details are crucial for ensuring the ABS and traction control systems function properly after replacement, underlining the necessity of choosing a model-specific part.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Honda is nearing the end of its service life. One of the most prevalent signs is a rhythmic clicking sound when turning on full lock, such as when parking or negotiating a tight junction. This noise usually stems from the outer CV joint where the internal steel balls have begun to wear down their tracks. If you instead experience noticeable vibrations throughout the vehicle under acceleration that dissipate once you lift off the accelerator, the inner CV joint is typically at fault. The inner joint sits closest to the gearbox, absorbing axial movement as the suspension travels up and down.

Another critical warning sign is a split CV boot, the rubber gaiter protecting the joints. If the boot tears, lubricating grease escapes whilst road grit, water, and salt penetrate inside. This dramatically accelerates wear and can cause catastrophic failure within a very short distance. We therefore recommend inspecting the CV boots regularly during tyre changes or routine servicing. If you spot grease splattered on the inner rim or suspension components, it is a clear sign that a boot has split and the drive shaft requires immediate attention to prevent more costly secondary damage.

How to choose the correct drive shaft for Honda

Navigating the sea of car parts can seem daunting, but we have made the process straightforward. The most reliable way to find the correct drive shaft for your Honda is to select your vehicle’s make, model, and engine variant in our catalogue. This automatically filters the parts engineered to fit your specific car, removing uncertainty surrounding engine codes, gearbox types, and production years—all factors that dictate drive shaft configuration. Our database is aligned with exact Honda specifications, providing peace of mind that your ordered part will fit correctly.

If you wish to double-check details, there are a few physical dimensions you can verify. These primarily include the overall compressed length of the shaft, as well as the spline counts on both the outer wheel side and the inner gearbox side. For certain Honda models, variations also exist depending on whether the car is equipped with an ABS reluctor ring, even though most modern vehicles feature ABS as standard. Combining our vehicle selection tool with a quick visual check of your original part guarantees a precise match every time.

Popular Honda models to explore

Continue to the correct Honda model for drive shafts:

With such a comprehensive inventory, narrowing your search by model is the ideal next step. Selecting your specific model delivers a tailored view focused on fitment, drivetrain type, and the exact parts suitable for your vehicle.

Whichever of these models you drive, you can depend on our components delivering top-tier reliability. We continuously update our inventory to support the newest production years as well as rare engine configurations, ensuring you find the right drivetrain component without delay.

Why shop with cvjoint24.com

When you choose cvjoint24.com, you are partnering with the international shop of a Swedish driveline specialist that possesses extensive expertise in vehicle drivetrains. We are not a generic car parts retailer; we specialise in drive shafts, CV joints, and related components. This dedication allows us to deliver technical guidance and product knowledge that few generalists can rival. Our aim is to provide you with the correct part first time, saving you time and labour costs during installation.

We also recognise the urgency of reliable dispatch. A car sitting immobilised in a garage due to a worn driveshaft demands a prompt resolution. Shipping directly from our specialist warehouse in Helsingborg, Sweden, across the EU, we maintain efficient logistics to dispatch your orders promptly. Combined with competitive pricing and dedicated customer support familiar with Honda drivetrains, we are the trusted choice for DIY mechanics and professional garages alike. Shop with us and benefit from dedicated specialist support.

Frequently Asked Questions about Drive Shafts for Honda

How do I know if my Honda needs a new drive shaft?

The most common signs are clicking noises when cornering (outer CV joint) or vibrations under acceleration (inner CV joint). If you notice that the CV boot is torn or grease has leaked out, you should act quickly to prevent complete failure.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, on many Honda models it is possible to replace only the outer or inner CV joint. However, if the shaft itself is damaged, severely corroded, or multiple joints are worn, it is often more cost-effective and safer to replace the complete drive shaft.

Does the same drive shaft fit both manual and automatic Honda models?

Drive shafts often differ between manual and automatic gearboxes, as the spline fitting into the gearbox and the overall shaft length can vary. Always select your car's exact make, model and engine variant on our site to confirm compatibility.

What does the fitment guarantee mean for my Honda?

Our fitment guarantee means that when you select your vehicle's make, model and engine details and order the recommended part, we guarantee it will fit. In the unlikely event of an issue, we will help you source the correct part without delay.

Is there a difference between the right and left drive shaft on a Honda?

Yes, on most Honda models the right and left drive shafts are different lengths. This is because the gearbox is not mounted centrally in the engine bay. Always check which side you need before placing your order.

How quickly will my new drive shaft be delivered?

We aim to dispatch your order as quickly as possible from our Swedish warehouse. For most in-stock items, we ensure fast international dispatch across the EU so you can get your Honda back on the road without unnecessary delay.