Drive shafts for Honda CRX

Find the right drive shaft for Honda CRX by exploring our range, covering everything from early 1.6 i 16V models to later generations with VTi engines. Whether you drive a sporty coupé...

Products for Drive shafts for Honda CRX

27 products
1 - 24 of 27
Item no.:2156413
  • Position: Front right
  • Total length: 624 mm
  • Splines gearbox side: 25
  • Splines wheel side: 26
Item no.:1119240
  • Position: Front left
  • Total length: 630 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
Item no.:2140021
  • Position: Front right
  • Total length: 590 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
Item no.:2114994
  • Position: Front right
  • Total length: 572 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • ABS teeth: 50
Item no.:1110707
  • Position: Front left
  • Total length: 910 mm
  • Splines gearbox side: 25
  • Splines wheel side: 26
Item no.:1192608
  • Position: Front left
  • Total length: 910 mm
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • ABS teeth: 50
Item no.:1178776
  • Position: Front left
  • Total length: 564 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • ABS teeth: 50
Item no.:1198338
  • Position: Front left
  • Total length: 564 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
Item no.:2175236
  • Position: Front right
  • Total length: 597 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
Item no.:210175
  • Position: Front right
  • Total length: 597 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
Item no.:1177944
  • Position: Front left
  • Total length: 610 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
Item no.:2193070
  • Position: Front right
  • Total length: 597 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
Item no.:2120549
  • Position: Front right
  • Total length: 597 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • ABS teeth: 50
Item no.:1100571
  • Position: Front left
  • Total length: 610 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • ABS teeth: 50
Item no.:214485
  • Position: Front right
  • Total length: 613 mm
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • ABS teeth: 50
Item no.:0150664
  • Total length: 625 mm
  • Splines gearbox side: 25
  • Splines wheel side: 26
Item no.:110084
  • Total length: 608 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • ABS teeth: 50
Item no.:218571
  • Total length: 608 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • ABS teeth: 50
Item no.:116630
  • Total length: 560 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
Item no.:1110009
  • Position: Front left
  • Total length: 562 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • ABS teeth: 50
Item no.:211882
  • Total length: 595 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
Item no.:212819
  • Total length: 595 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • ABS teeth: 50
Item no.:216879
  • Total length: 571 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
Item no.:2167338
  • Position: Front right
  • Total length: 571 mm
  • Splines gearbox side: 27
  • Splines wheel side: 26
  • ABS teeth: 50
Showing 1–24 of 27 products

Drive shafts for Honda CRX

The Honda CRX is an iconic model renowned for its driving enjoyment and lightweight design. Maintaining these unique handling characteristics calls for a drivetrain in peak condition. A drive shaft for Honda CRX is subjected to heavy loads, especially during spirited driving on twisting roads. At CVJoint24 we stock 14 dedicated items in our range to cover the various versions of this classic, from early models through to later VTi variants. Selecting the correct component is not merely a matter of keeping the car rolling; it is about preserving the precise steering feel and responsive acceleration that define the model. As Swedish driveline specialists, we ensure every part meets stringent standards for material quality and precision to stand the test of time.

What does a drive shaft do on a Honda CRX?

The primary role of the drive shaft on a front-wheel-drive car such as the Honda CRX is to transfer torque from the gearbox directly to the front wheels. Because the CRX features a very compact engine bay layout and sportily tuned suspension, the drive shaft must cope with both sharp angles during hard cornering and rapid suspension travel while rotating at high speeds. It consists of a sturdy shaft bar fitted with an inner and an outer CV joint that together provide this vital flexibility. Without a fully functioning driveshaft, engine power never reaches the tarmac, making it one of the most critical links in the vehicle's transmission system. A well-balanced shaft also minimises unnecessary wear on the gearbox output bearings.

Common signs of wear

There are several clear warning signs indicating that a drive shaft for your Honda CRX is nearing the end of its service life. One of the most common symptoms is vibration felt through the steering wheel or throughout the entire body, particularly under hard acceleration. This is often caused by internal wear or an unbalanced shaft. If you hear a rhythmic clicking noise on full steering lock, the outer CV joint is usually worn or damaged. Other signs include noises during engine braking or visible grease stains on the inside of the wheel rim, indicating that a CV boot has split. Once the grease escapes and dirt gets in, wear accelerates dramatically. Ignoring these warnings can ultimately lead to total failure, where the drive shaft snaps and leaves the car completely stranded.

How to choose the correct drive shaft

Finding the right spare part for an older sports car can sometimes be a technical challenge, but our expertise makes the process straightforward and secure. When choosing a drive shaft for your Honda CRX, the most critical factors to verify are the engine type, exact model year and whether the car is fitted with ABS. The tooth count on the ABS ring and the spline count on the stub shafts can vary across different specifications. The most reliable way to ensure an exact fit is to select your car's make, model and engine in our search tool. This instantly filters out the 14 products that are technically compatible with your specific car. We also recommend double-checking the overall shaft length if your vehicle has been modified for track days or features an unusual import specification, ensuring the part matches your car's exact requirements.

Related parts to inspect

Be sure to inspect these matching pages for the same vehicle when working on the drive shaft:

When a driveline component shows signs of wear, neighbouring parts on the same car frequently require inspection too. By checking these matching pages for Honda CRX, it becomes easier to determine whether the fault lies within the drive shaft itself or in an adjacent section of the drivetrain.

This is especially important on models where vibrations, play and noises can transfer symptoms across several parts in the same driveline. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that causes the same issue.

By proactively replacing worn minor components alongside the drive shaft, you safeguard your car's reliability and avoid secondary damage that could prove costly later on.

Why shop at cvjoint24.com

cvjoint24.com is your reliable partner for premium drivetrain components for Japanese classics. As Swedish driveline specialists, we offer a unique blend of thorough technical expertise and a carefully curated range that generic car parts chains struggle to match. We understand the specific demands of cars like the Honda CRX, where every component plays a role in the overall driving experience. With our extensive database and straightforward selection by make, model and engine, we minimise the risk of incorrect orders and ensure absolute product compatibility. When you buy from us, you receive components chosen to deliver optimum performance, safety and long service life across thousands of kilometres on European roads, whether for everyday driving or track days.

Frequently asked questions about drive shafts for Honda CRX - High quality & perfect fit

How do I know if my Honda CRX needs a new drive shaft?

The most common signs are steering wheel vibrations under acceleration, clicking noises when cornering sharply, or visible grease leaking from the drive shaft boots.

Do all drive shafts fit every Honda CRX model?

No, they differ depending on the engine variant (such as the 1.6i-16 or VTi), model year, and whether the car is equipped with ABS. Select your car's make, model and engine to find the right part.

Can I replace just the CV joint instead of the entire shaft?

Yes, if the drive shaft bar itself is undamaged, you can replace the inner or outer CV joint separately. We supply both complete shafts and individual joints.

Are CV boots included when I buy a complete drive shaft for my CRX?

Yes, our complete drive shafts are supplied fully assembled with CV boots, grease, and the necessary fitting accessories for a straightforward installation.

Why is it important to have the correct number of teeth on the ABS ring?

If the tooth count does not match your car's original specification, the ABS sensor will read an incorrect wheel speed, causing the ABS system to malfunction.