Drive shafts for Jeep Grand Cherokee

Explore a comprehensive range of drive shafts tailored for the Jeep Grand Cherokee. The range covers generations from 1991 onwards, including variants for petrol, diesel and flex-fuel...

Products for Drive shafts for Jeep Grand Cherokee

50 products
1 - 24 of 50
Item no.:1190588
  • Position: Front left
  • Total length: 575 mm
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • ABS teeth: 54
Item no.:2167202
  • Position: Front right
  • Total length: 979 mm
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • ABS teeth: 54
Item no.:1100541
  • Position: Front left
  • Total length: 663 mm
  • Splines gearbox side: 37
  • Splines wheel side: 32
Item no.:612261
  • Position: Rear
  • Total length: 859 mm
  • Splines gearbox side: 37
  • Splines wheel side: 32
Item no.:1124021
  • Position: Front left
  • Total length: 591 mm
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • ABS teeth: 48
Item no.:1185011
  • Position: Front left
  • Total length: 618 mm
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • ABS teeth: 48
Item no.:2140264
  • Position: Front right
  • Total length: 1,045 mm
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • ABS teeth: 48
Item no.:2112898
  • Position: Front right
  • Total length: 1,018 mm
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • ABS teeth: 48
Item no.:112566
  • Position: Front left
  • Total length: 622 mm
  • Splines gearbox side: 34
  • Splines wheel side: 26
Item no.:615622
  • Position: Rear
  • Diameter: 100 mm
  • Total length: 40 mm
  • ABS teeth: 25
Item no.:314734
  • Position: Front right
  • Total length: 1,035 mm
  • Splines gearbox side: 37
  • Splines wheel side: 32
Item no.:618458
  • Position: Rear
Item no.:2102286
  • Position: Front right
  • Total length: 608 mm
  • Splines gearbox side: 29
  • Splines wheel side: 29
Item no.:1146308
  • Position: Front left
  • Total length: 654 mm
  • Splines gearbox side: 29
  • Splines wheel side: 29
Item no.:412895
  • Position: Rear
  • Total length: 858 mm
  • Splines gearbox side: 32
  • Splines wheel side: 32
Item no.:115515
  • Total length: 575 mm
  • Splines wheel side: 27
Item no.:212921
  • Total length: 977 mm
  • Splines wheel side: 27
Item no.:614679
  • ABS teeth: 0
Item no.:111860
  • Total length: 576 mm
  • Splines gearbox side: 27
  • Splines wheel side: 27
Item no.:2177634
  • Position: Front right
  • Total length: 979 mm
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • ABS teeth: 54
Item no.:115646
  • Total length: 670 mm
  • Splines gearbox side: 37
  • Splines wheel side: 32
Item no.:412209
  • Position: Rear
  • Total length: 832 mm
  • Splines gearbox side: 32
  • Splines wheel side: 32
Showing 1–24 of 50 products

Drive shafts for Jeep Grand Cherokee

The drive shaft is a vital component in the drivetrain of your Jeep Grand Cherokee. This robust SUV demands parts capable of withstanding both high torque and the heavy loads encountered in sophisticated four-wheel-drive systems. We supply drive shafts engineered to match original equipment specifications, ensuring your vehicle's handling and stability are fully maintained. Fitting the correct components reduces the risk of consequential damage to the gearbox and differentials, which is particularly crucial on a heavy vehicle like the Grand Cherokee. Our range covers multiple generations of this iconic model, ensuring every shaft meets the strength requirements needed for both motorway cruising and light off-roading.

What does a drive shaft do on a Jeep Grand Cherokee?

On a Jeep Grand Cherokee, the drive shaft transfers rotational force from the differential out to the road wheels. Because the vehicle is frequently fitted with advanced drive systems such as Quadra-Trac or Quadra-Drive, the driveshafts are exposed to considerable forces under acceleration and across uneven ground. A complete drive shaft consists of the shaft itself along with an inner and an outer CV joint, allowing for suspension travel and steering angles whilst delivering constant power. Without an intact drive shaft, the vehicle will lose drive and safety is severely compromised, as power cannot be correctly distributed across the axles—a fundamental requirement for the vehicle's four-wheel-drive capabilities.

Common signs of wear

There are several clear indications that a drive shaft on your Jeep Grand Cherokee is failing. One of the most frequent symptoms is a noticeable vibration through the steering wheel or throughout the cabin under acceleration. If you hear a rhythmic clicking noise on full steering lock, it is usually a worn outer joint. Another warning sign is grease leaking from around the CV boots; once grease escapes, internal components rapidly wear out from friction and road contamination. For Jeep drivers who venture off-road or encounter salted winter roads, the condition of the boots is critical, as the smallest tear allows water and grit to penetrate and ruin the joint's hardened surfaces. Catching these warning signs early often prevents a total breakdown.

Choosing the right drive shaft

Selecting the correct replacement part for a Jeep can be challenging, as specifications vary considerably between different engine options and model years. Simply choose your car's make, model and engine in our vehicle selector to filter out the components that are technically compatible with your vehicle. Always verify the overall length of the shaft and the spline counts on both the inner and outer ends, as these details vary according to the drivetrain configuration. It is common for different shafts to be specified for the left and right sides, and high-output powertrains like the V8 models may require heavy-duty versions. We help you find the precise part for an effortless installation and lasting durability, whether your Jeep is used for heavy towing or daily commuting.

Related parts to inspect

Be sure to check these related pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows wear, adjacent parts on the vehicle often require attention as well. By comparing these exact pages for the Jeep Grand Cherokee, it is easier to determine whether an issue lies with the drive shaft itself or with another component in the drivetrain.

This is particularly relevant on models where vibrations, play and noises can transmit symptoms across multiple driveline parts. A quick look at related categories ensures you do not replace one part while overlooking an adjacent component contributing to the same problem.

By inspecting the entire drivetrain and renewing any worn ABS rings at the same time, you guarantee that both power delivery and safety systems function seamlessly for tens of thousands of kilometres to come.

Why buy from cvjoint24.com?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching directly from our warehouse in Helsingborg, Sweden. We understand the technical nuances of the Jeep Grand Cherokee and offer an extensive range of driveline products with specialist depth. Our focus is on delivering OE-quality car parts that withstand harsh European winters and rigorous driving conditions. By selecting your make, model and engine, you can find the right spare parts quickly and reliably. We combine technical know-how with strict product relevance so you can be confident your Jeep receives the dependable components it needs for optimal performance.

Frequently Asked Questions about Drive Shafts for Jeep Grand Cherokee

How do I know if my Jeep Grand Cherokee needs a new drive shaft?

The most common symptoms are vibrations during acceleration, clicking noises on full steering lock, or visible grease leaks from split CV boots.

Do all drive shafts fit every Jeep Grand Cherokee model?

No, drive shafts vary depending on the model year, engine (such as V8 vs diesel), and the specific four-wheel-drive system fitted to the vehicle. Always select your make, model and engine to find the correct match.

Is there a difference between the right and left drive shaft on a Grand Cherokee?

Yes, on most Jeep Grand Cherokee models, the right and left drive shafts are different lengths and can feature different mountings.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, if the shaft bar itself is undamaged, you can often replace just the inner or outer CV joint, which can be a more economical alternative.

Why does my Jeep vibrate even after replacing the drive shaft?

If vibrations persist, it may be due to an unbalanced propeller shaft, worn centre bearings, or the new drive shaft not being seated properly in the splines.

What happens if a drive shaft snaps while driving?

If a drive shaft breaks, the wheel loses drive. On a four-wheel-drive Jeep, the vehicle may sometimes still move forward, but continuing to drive poses a serious risk of damaging the differential.