Drive shafts for Lancia Phedra

Looking for a replacement drive shaft for your Lancia Phedra? As a dedicated driveline specialist, we supply a carefully chosen range for this model. Finding the exact component for a...

Products for Drive shafts for Lancia Phedra

16 products
1 - 16 of 16
Item no.:212048
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 980 mm
  • Joint diameter: 100 mm
Item no.:212232
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 970 mm
  • Joint diameter: 100 mm
Item no.:1127096
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 610 mm
  • Joint diameter: 95 mm
Item no.:1184636
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 656 mm
  • Diameter 1: 86 mm
Item no.:211455
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 960 mm
  • Diameter 1: 95 mm
Item no.:2145889
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 27
  • Total length: 865 mm
  • Joint diameter: 86 mm
Item no.:1102969
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 631 mm
  • Joint diameter: 102 mm
Item no.:111925
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 637 mm
  • Joint diameter: 95 mm
Item no.:217037
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 970 mm
  • Joint diameter: 95 mm
Item no.:117346
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 665 mm
  • Joint diameter: 86 mm
Item no.:214009
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • Total length: 950 mm
  • Joint diameter: 86 mm
Item no.:118405
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 623 mm
  • Diameter 1: 92 mm
Item no.:213628
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 926 mm
  • Diameter 1: 92 mm
Item no.:219308
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 923 mm
  • Diameter 1: 100 mm
Item no.:1150208
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 641 mm
  • Joint diameter: 100 mm
Item no.:213055
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 970 mm
  • Joint diameter: 100 mm
  • Joint diameter, gearbox side: 89 mm

Drive shafts for Lancia Phedra

The Lancia Phedra is a spacious and technically sophisticated MPV, developed in a joint venture that places specific demands on its mechanical components. The drive shaft is a vital part of the vehicle's architecture, built to cope with substantial torque alongside continuous movement from suspension travel and steering. At CVJoint24, you will find a comprehensive range of drive shafts tailored specifically to meet the technical requirements of your Lancia Phedra. Whether your vehicle is powered by a petrol engine or one of the strong JTD diesels, ensuring the shaft has the exact dimensions and high material quality is essential. We focus on providing parts that match or exceed original specifications, preserving the car's celebrated ride comfort and road safety.

What does the drive shaft do on a Lancia Phedra?

The primary role of the drive shaft on a front-wheel-drive car such as the Lancia Phedra is transferring rotational power from the gearbox straight to the driven wheels. It is a demanding task: the shaft must rotate at high speeds while constantly changing angles as the wheels steer and travel over road imperfections. Precision-engineered joints inside the driveshaft allow for this flexibility without sacrificing power delivery. In a heavy MPV like the Phedra, these components endure severe stress, particularly under hard acceleration or when travelling fully loaded. A drive shaft in peak condition ensures engine power reaches the tarmac smoothly without vibration or power loss, which is fundamental to the entire drivetrain and overall fuel efficiency.

Common signs of wear

Several clear warning signs indicate that a drive shaft on your Lancia Phedra is approaching the end of its service life. One of the most frequent symptoms is vibration felt through the steering wheel or floorpan under acceleration. This is often caused by internal wear inside the inner CV joint, creating an imbalance as it rotates. Another telltale sign is a rhythmic clicking or knocking sound when taking tight turns at low speeds, typically pointing to a worn outer CV joint. You should also inspect the CV boots regularly; grease splattered across the inner wheel rim or wheel arch indicates a split boot. If road grit and moisture penetrate the joint, wear accelerates rapidly and soon necessitates replacing the entire drive shaft.

Choosing the right drive shaft

Selecting the correct drive shafts for Lancia can be tricky because multiple technical configurations often exist for the same model year. Differences include the overall length, the spline count on the ends fitting into the wheel hub and gearbox, and whether the vehicle requires an integrated ABS reluctor ring. To avoid any guesswork, select your car's exact make, model and engine variant in our catalogue to view only the parts that match your vehicle. Remember to check whether you need the left-hand or right-hand side, as drive shafts on the Lancia Phedra almost always vary in length and design due to the transverse gearbox position.

Related parts to inspect

Be sure to check these related pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, nearby parts on the vehicle often warrant inspection too. By comparing these relevant categories for the Lancia Phedra, it becomes much easier to determine whether an issue lies with the drive shaft itself or another related transmission part.

This is especially important on vehicles where vibrations, play and strange noises can transfer across interconnected drivetrain parts. Checking related components helps you avoid replacing one part whilst overlooking another adjacent worn item causing the same symptoms.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching high-grade parts across the EU from our warehouse in Helsingborg, Sweden. We understand the specific demands of vehicles like the Lancia Phedra and supply only components built to exacting quality standards. Thanks to our fitment guarantee, you can be confident that the drive shaft you order will fit your car perfectly when selected by your make, model and engine. We combine an extensive product range with deep technical expertise to help you get the right component first time. By specialising strictly in drivetrain components, we offer exceptional accuracy and service. With prompt dispatch and a true passion for driveline engineering, we are your trusted choice for Lancia spare parts.

Frequently asked questions about drive shafts for Lancia Phedra

How do I know whether the right or left drive shaft is damaged on my Lancia Phedra?

Vibrations during acceleration often indicate a worn inner CV joint, whilst clicking noises when cornering point to the outer joint. If the noise occurs when turning left, it is usually the outer CV joint on the right-hand side that is worn, and vice versa.

Can I replace just a CV joint instead of the entire drive shaft?

Yes, if the shaft bar itself is undamaged and has not bent, you can often replace just the inner or outer CV joint. This is a cost-effective alternative if the wear is confined to the joint.

Why are there so many different drive shafts for the Lancia Phedra?

The variations depend on the engine variant (e.g. 2.0 vs 2.2 JTD), gearbox type (manual or automatic) and model year. Each configuration requires specific lengths and spline counts to operate correctly.

What is included when I buy a complete drive shaft from you?

Our complete drive shafts are supplied fully assembled with both inner and outer CV joints, CV boots, grease, and the necessary fitting hardware such as hub nuts or circlips.

Do I need to change the gearbox oil when replacing a drive shaft?

When removing the drive shaft, gearbox oil often drains out. It is therefore an ideal opportunity either to top up the fluid or to change the oil completely to ensure the longevity of your gearbox.

What does your fitment guarantee for drive shafts mean?

It means we guarantee the part will fit your Lancia Phedra when you select your vehicle's make, model and engine variant. In the unlikely event that the part does not fit, we will help you find the correct one without any hassle.