Drive shafts for Land Rover Freelander

Looking for a high-quality drive shaft for your Land Rover Freelander? As a dedicated Swedish driveline specialist supplying drivers across Europe, CVJoint24 offers an expertly curated...

Products for Drive shafts for Land Rover Freelander

17 products
1 - 17 of 17
Item no.:3120658
  • Position: Front
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 610 mm
  • ABS teeth: 60
Item no.:1195840
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 630 mm
  • ABS teeth: 60
Item no.:1108023
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 630 mm
  • Diameter 1: 92 mm
Item no.:2160307
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 595 mm
  • ABS teeth: 60
Item no.:2178266
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 595 mm
  • Diameter 1: 92 mm
Item no.:618372
  • Position: Rear
  • Splines gearbox side: 23
  • Splines wheel side: 28
  • Total length: 808 mm
  • Seal ring diameter: 58 mm
Item no.:7304180
  • Position: Rear
  • Splines gearbox side: 23
  • Splines wheel side: 28
  • Total length: 808 mm
  • Diameter 1: 75 mm
Item no.:615212
  • Position: Rear
  • ABS teeth: 60
Item no.:2183499
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 595 mm
  • ABS teeth: 60
Item no.:2111726
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 593 mm
  • Joint diameter: 92 mm
Item no.:1145245
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 630 mm
  • Joint diameter: 92 mm
Item no.:312580
  • Position: Front
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 613 mm
  • Joint diameter: 92 mm
Item no.:7304149
  • Position: Front
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 614 mm
Item no.:2101989
  • Position: Front
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 610 mm
  • ABS teeth: 60
Item no.:5177926
  • Position: Rear
  • Splines gearbox side: 23
  • Splines wheel side: 28
  • Total length: 808 mm
  • ABS teeth: 60
Item no.:7304178
  • Position: Rear
  • Splines gearbox side: 23
  • Splines wheel side: 28
  • Total length: 808 mm
  • Diameter 1: 75 mm
Item no.:7304151
  • Position: Front
  • Splines gearbox side: 25
  • Splines wheel side: 28
  • Total length: 614 mm

Drive shafts for Land Rover Freelander

The Land Rover Freelander is renowned for its ability to handle both city driving and demanding terrain. Maintaining this versatility requires a drivetrain in peak condition. The drive shaft is one of the most critical components in this system, subjected to heavy loads during every acceleration and turn. At CVJoint24, you will find a dedicated range tailored specifically for the Freelander. Every drive shaft is engineered to meet or exceed original equipment specifications, ensuring smooth, efficient power delivery free from unwanted noises. Choosing the correct part is essential for your vehicle's longevity and road safety.

What does a drive shaft do on a Land Rover Freelander?

The primary task of a drive shaft on a Land Rover Freelander is to transmit torque from the gearbox or differential directly to the wheels. Because the Freelander is frequently equipped with four-wheel drive, both the front and rear drive shafts play a central role in how the vehicle tackles varied surfaces. A drive shaft consists of a shaft bar with CV joints at both ends, allowing the wheels to move up and down with the suspension and steer (on the front axles) while constantly transferring power. Without a fully functioning driveshaft, the car loses its ability to drive efficiently, which can leave you stranded or cause secondary drivetrain damage due to imbalance.

Common signs of wear

Several clear symptoms indicate that a drive shaft on your Land Rover Freelander is wearing out. One of the most common signs is a clicking or knocking noise when making sharp turns at low speeds. This typically points to a damaged outer CV joint. If you instead experience vibrations throughout the car under acceleration, the inner CV joint is often the culprit. It is also vital to inspect the CV boots regularly; if a boot splits, the lubricating grease escapes and dirt enters, rapidly destroying the precision bearings inside the joint. Grease splatters on the inside of the wheel rim are a sure sign that an inspection is overdue.

How to choose the correct drive shaft

Selecting the right drive shaft for your Land Rover Freelander requires precision. Variations exist depending on whether the car has a manual or automatic gearbox, as well as the specific engine under the bonnet. Furthermore, shafts differ between the left and right sides, and between the front and rear axles. Other crucial factors include the spline count on the shaft ends and whether the car has ABS, as the ABS ring is often mounted directly on the joint. To make your choice straightforward and accurate, simply select your Freelander's model year and engine variant in our store. This filters out incompatible parts, showing only the options guaranteed to fit your vehicle.

Related parts to inspect

Be sure to check these related pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows wear, adjacent parts on the vehicle often require inspection as well. Comparing these exact categories for the Land Rover Freelander makes it easier to determine whether the issue lies in the drive shaft itself or in a neighbouring section of the transmission system.

This is particularly relevant on models where vibrations, play, and noises can transfer between interconnected driveline components. Checking related categories reduces the risk of replacing one correct part while overlooking an adjacent component that contributes to the same problem.

Why buy from CVJoint24?

As the international shop of a Swedish driveline specialist shipping from our central warehouse across the EU, we offer a unique combination of expertise and catalogue depth. We focus purely on car parts for vehicle power transmission, delivering exact fitment that general motor factors often struggle to match. When you order from us, you always benefit from our fitment guarantee, giving you complete confidence that your new parts will fit your Land Rover Freelander perfectly. With fast dispatch across Europe, we help keep your vehicle's garage downtime to an absolute minimum. Our goal is to provide the correct part at competitive prices so you can keep your Freelander running at its best.

Frequently asked questions about drive shafts for Land Rover Freelander

How do I know if my Freelander needs a new drive shaft?

The most common symptoms are clicking noises when cornering, vibrations under acceleration, or visible grease leaking from split CV boots.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, if the shaft bar itself is undamaged, you can often replace just the inner or outer CV joint, which can be a more cost-effective option.

Is there a difference between drive shafts for manual and automatic gearboxes?

Yes, there can be differences in length and splines. Always select your car's exact model, year and engine variant to ensure you receive the correct version.

Does the same drive shaft fit both the left and right side?

Usually not. On the Land Rover Freelander, drive shafts are typically side-specific for either the left or right side due to different lengths.

What happens if I continue driving with a damaged drive shaft?

A failing drive shaft can ultimately snap completely, leaving the vehicle stranded and potentially causing secondary damage to the gearbox, suspension, and brakes.

Are CV joints and boots included when I buy a complete drive shaft?

Yes, when you buy a complete drive shaft from us, it arrives fully assembled with both inner and outer CV joints as well as new CV boots.