Drive shafts for Lexus RX

Find the right drive shaft for your Lexus RX from our comprehensive range covering both all-wheel-drive and front-wheel-drive models. Whether you drive an early RX 300 or a later RX 350,...

Products for Drive shafts for Lexus RX

32 products
1 - 24 of 32
Item no.:112467
  • Position: Front left
  • Total length: 659 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30
  • ABS teeth: 48
Item no.:216315
  • Position: Front right
  • Total length: 1,011 mm
  • Splines gearbox side: 24
  • Splines wheel side: 3
Item no.:212394
  • Position: Front right
  • Total length: 996 mm
  • Splines gearbox side: 23
  • Splines wheel side: 30
Item no.:114948
  • Position: Front left
  • Total length: 624 mm
  • Splines gearbox side: 23
  • Splines wheel side: 30
Item no.:610190
  • Position: Rear
  • Total length: 665 mm
  • Splines wheel side: 26
Item no.:613173
  • Position: Rear
  • Total length: 794 mm
  • Splines gearbox side: 23
  • Splines wheel side: 26
Item no.:1175027
  • Position: Front left
  • Total length: 652 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30
  • ABS teeth: 48
Item no.:112507
  • Position: Front left
  • Total length: 626 mm
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • ABS teeth: 48
Item no.:212271
  • Position: Front right
  • Total length: 1,005 mm
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • ABS teeth: 48
Item no.:2146258
  • Position: Front right
  • Total length: 993 mm
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • ABS teeth: 48
Item no.:3153984
  • Position: Front left, Front right
  • Flange diameter: 112 mm
  • Total length: 564 mm
  • Splines wheel side: 30
  • ABS teeth: 48
Item no.:1118592
  • Position: Front left
  • Total length: 638 mm
  • Splines gearbox side: 23
  • Splines wheel side: 26
  • ABS teeth: 48
Item no.:615806
  • Position: Rear
  • Total length: 691 mm
  • Splines wheel side: 26
Item no.:214298
  • Position: Front right
  • Total length: 674 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30
Item no.:216123
  • Position: Front right
  • Total length: 995 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30
  • ABS teeth: 48
Item no.:0150494
  • Total length: 564 mm
  • Splines wheel side: 30
Item no.:215616
Item no.:111191
  • ABS teeth: 0
Item no.:213941
  • ABS teeth: 0
Item no.:113768
  • Position: Front left
  • Total length: 676 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30
Item no.:617012
  • Position: Rear
  • Total length: 833 mm
  • Splines gearbox side: 23
  • Splines wheel side: 26
Item no.:619621
  • Position: Rear
  • Total length: 821 mm
  • Splines gearbox side: 23
  • Splines wheel side: 26
Item no.:210070
  • Position: Front right
  • Total length: 996 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30
Item no.:116814
  • Position: Front left
  • Total length: 640 mm
  • Splines gearbox side: 24
  • Splines wheel side: 30
Showing 1–24 of 32 products

Drive shafts for Lexus RX

The Lexus RX is renowned for its exceptional comfort and reliability, but even a premium SUV requires regular maintenance of its drivetrain to maintain its driving characteristics. A drive shaft for Lexus RX is exposed to severe stresses throughout the vehicle's lifespan, especially on all-wheel-drive versions where power must be distributed effectively between the engine and the wheels. We supply components that meet the rigorous demands for precision and durability expected by a Lexus owner. By choosing the right parts, you preserve your vehicle's smooth ride and minimise the risk of consequential damage to the gearbox or suspension.

What does a drive shaft do on a Lexus RX?

The primary task of the drive shaft on a Lexus RX is to transfer torque generated by the engine, via the gearbox or differential, directly to the wheels. It is a complex mechanical component that must cope with both suspension movements and steering angles while rotating at high speed. On AWD models, driveshafts are fitted both front and rear, placing demanding requirements on power transmission synchronisation. Without an intact drive shaft, the car cannot move forward, and a defective shaft can prevent power from reaching the road safely or efficiently, impairing both acceleration and stability.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Lexus RX is wearing out or needs replacing. One of the most common signs is vibrations felt through the steering wheel or bodywork during acceleration, which often points to imbalance or wear in the inner joint. If you hear a clicking or knocking noise during tight turns at low speeds, it is usually a worn outer CV joint for Lexus RX. Other symptoms include visible grease leakage around the CV boots or a clunking noise when shifting between drive and reverse. Ignoring these warnings can ultimately lead to a complete breakdown at the roadside.

How to choose the correct drive shaft

Finding the correct drive shaft for your specific Lexus RX can be challenging, as specifications vary significantly depending on generation, engine variant, and whether the car is front-wheel drive or all-wheel drive. The most important step for a successful purchase is selecting your car's exact make, model and engine in our vehicle selector. This filters out the parts that are technically compatible with your specific chassis. Always verify the overall length of the shaft and the number of splines (teeth) against the old part where possible, as the manufacturer occasionally introduced revisions over the model's production cycle that affect fitment. Our database is optimised to give you the correct answer immediately.

Related parts to inspect

It is also advisable to check these specific pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, nearby parts for the same car often need inspecting as well. By comparing these specific pages for Lexus RX, it becomes easier to determine whether the fault lies in the drive shaft itself or in an adjacent section of the driveline.

This is particularly relevant on models where vibrations, play and unusual noises can transfer symptoms across several components within the same drivetrain. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent part that contributes to the very same issue.

By replacing worn neighbouring components at the same time as the drive shaft, you save both time and future labour costs, whilst ensuring your car's safety systems operate at their best.

Why shop at CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, offering an extensive range for the Lexus RX. We understand the importance of precise fitment and premium quality so your vehicle stays safe and comfortable on European roads. Our dedicated expertise in power transmission allows us to offer technical guidance and car parts that genuinely fit, unlike general auto parts stores that lack our niche knowledge. With our straightforward search by make, model and engine, and our strong specialist heritage, we are the natural choice for discerning owners looking for durable and cost-effective solutions for their Lexus.

Frequently asked questions about drive shafts for Lexus RX

How do I know if my Lexus RX needs a new drive shaft?

Common signs include vibrations under acceleration, clicking noises when taking sharp turns, or visible grease leaks from the drive shaft boots.

Do all drive shafts fit every Lexus RX model?

No, they differ depending on the generation, engine variant (such as hybrid vs petrol), and whether the car is front-wheel drive or all-wheel drive. Always select your vehicle by make, model, and engine to find the correct part.

Is it difficult to replace a drive shaft on a Lexus RX yourself?

It requires mechanical experience and the correct tools, such as a heavy-duty socket for the hub nut and sometimes a puller. Many owners choose to have a professional garage carry out the work to ensure correct torque settings.

Does the drive shaft include CV joints and boots?

Yes, our complete drive shafts are normally supplied fully assembled with both inner and outer CV joints as well as CV boots for a quick and straightforward installation.

Why is it important to inspect the ABS ring during replacement?

The ABS ring is often mounted on the outer section of the driveshaft. If it is damaged or corroded, the car's safety systems will trigger a warning, so it is best to ensure it is in pristine condition upon installation.