Drive shafts for Mazda 6

Discover our comprehensive selection of drive shafts tailored for the Mazda 6, covering petrol and diesel engine variants alike. Our range includes parts for both saloon and estate...

Products for Drive shafts for Mazda 6

32 products
1 - 24 of 32
Item no.:2122350
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 31
  • Total length: 653 mm
  • Joint diameter: 85 mm
Item no.:2125413
  • Position: Front right
  • Splines gearbox side: 31
  • Splines wheel side: 31
  • Total length: 1,017 mm
  • Diameter 1: 85 mm
Item no.:2155475
  • Position: Front right
  • Splines gearbox side: 31
  • Splines wheel side: 31
  • Total length: 1,025 mm
Item no.:2106411
  • Position: Front right
  • Splines gearbox side: 31
  • Splines wheel side: 31
  • Total length: 1,021 mm
  • Diameter 1: 94 mm
Item no.:1100698
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 31
  • Total length: 645 mm
  • Diameter 1: 94 mm
Item no.:217362
  • Splines gearbox side: 31
  • Splines wheel side: 31
  • Total length: 1,018 mm
Item no.:216649
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 399 mm
Item no.:1143109
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 666 mm
  • Joint diameter: 80 mm
Item no.:1169768
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 647 mm
  • ABS teeth: 44
Item no.:2130822
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 28
  • Total length: 601 mm
  • ABS teeth: 44
Item no.:2140350
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 638 mm
Item no.:1147019
  • Position: Front left
  • Splines gearbox side: 30
  • Splines wheel side: 31
  • Total length: 613 mm
  • ABS teeth: 44
Item no.:2103651
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 31
  • Total length: 558 mm
  • ABS teeth: 44
Item no.:4194626
  • Position: Rear left
  • Splines gearbox side: 26
  • Splines wheel side: 28
  • Total length: 785 mm
  • ABS teeth: 44
Item no.:7316749
  • Position: Rear left
  • Splines gearbox side: 26
  • Splines wheel side: 28
  • Total length: 785 mm
Item no.:2139857
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 618 mm
  • Joint diameter: 80 mm
Item no.:1144513
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 663 mm
Item no.:210976
  • Position: Front right
  • Splines gearbox side: 31
  • Splines wheel side: 31
  • Total length: 570 mm
Item no.:213648
  • Position: Front right
  • Splines gearbox side: 31
  • Splines wheel side: 31
  • Total length: 1,030 mm
Item no.:117361
  • Position: Front left
  • Splines gearbox side: 31
  • Splines wheel side: 31
  • Total length: 650 mm
Item no.:2114410
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 599 mm
  • ABS teeth: 44
Item no.:1136735
  • Position: Front left
  • Splines gearbox side: 30
  • Splines wheel side: 28
  • Total length: 643 mm
  • ABS teeth: 44
Item no.:2157965
  • Position: Front right
  • Splines gearbox side: 30
  • Splines wheel side: 28
  • Total length: 587 mm
  • ABS teeth: 44
Item no.:2192790
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 28
  • Total length: 602 mm
  • ABS teeth: 44
Showing 1–24 of 32 products

Drive shafts for Mazda 6

The Mazda 6 is renowned for its driving dynamics and reliability, but like all front-wheel-drive and all-wheel-drive vehicles, its drive shafts are subjected to substantial stress over time. A drive shaft for the Mazda 6 is a critical component that must withstand both the torque produced by the engine and the complex angles created by steering and suspension movement. Here at CVJoint24, you will find a carefully curated range of products specifically engineered to meet or exceed original equipment specifications for your car. Whether you drive an early generation or one of the newer models, our aim is to provide parts that restore your car’s original performance and minimise the risk of future breakdowns. We understand the importance of an exact fit, which is why we stock such an extensive selection for this model series.

What does a drive shaft do on a Mazda 6?

The primary role of the drive shaft on a Mazda 6 is to transfer rotational power directly from the gearbox to the wheels, enabling the car to travel forwards or backwards. This is achieved through a technical assembly consisting of a shaft bar and two joints – an inner and an outer joint. The inner CV joint allows the shaft to move up and down with suspension travel over road imperfections, whilst the outer CV joint enables the wheels to turn for steering whilst maintaining continuous power transfer. For Mazda 6 owners, a properly functioning driveshaft ensures smooth power delivery without jerking, vibration or unwanted noises. As the Mazda 6 is frequently equipped with high-torque engines, particularly in the diesel variants, high demands are placed on the steel grade of the shaft and the hardening of the joints to resist fatigue over years of service in varying European climates.

Common signs of wear

There are several distinct warning signs indicating that a drive shaft on your Mazda 6 may be failing or is already defective. One of the most typical symptoms is a rhythmic clicking or knocking noise that is clearly audible when turning sharply at low speeds, which usually points to a worn outer constant velocity joint. If you instead experience vibrations throughout the car body under acceleration, the inner CV joint has often developed play or lost its lubrication. It is also vital to inspect the CV boots regularly; if a boot splits, the protective grease escapes whilst dirt and moisture penetrate the assembly. On European roads, grit and road salt accelerate this wear rapidly. Ignoring these signs can eventually lead to complete failure where the shaft snaps, rendering the car undriveable and risking consequential damage to surrounding components.

How to choose the correct drive shaft

Finding the correct drive shaft for your Mazda 6 might seem daunting at first glance, as there are multiple technical variations depending on the engine, transmission type (manual or automatic) and exact production year. The differences between shafts often involve total length, the number of splines (teeth) on the ends that engage with the gearbox and wheel hub, and whether the shaft features an integrated ABS ring. To make your selection straightforward and reliable, select your car's make, model and engine variant in our search filter. This narrows our catalogue down so you only see the car parts guaranteed to fit your vehicle. Always check whether you need to replace the left or right side, as these shafts are rarely identical on the Mazda 6. On the longer side, an intermediate shaft is sometimes used, which is an important detail to keep in mind when ordering.

Related parts to inspect

Be sure to check these dedicated pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows signs of wear, it is common practice to inspect neighbouring components on the vehicle as well. By cross-referencing these exact pages for the Mazda 6, it becomes much easier to determine whether an issue lies with the drive shaft itself or with another adjacent part of the drivetrain.

This is particularly relevant on models where vibrations, play and noises can transmit symptoms across multiple driveline parts. A quick check of related categories reduces the risk of replacing one correct component while overlooking an adjacent worn part that contributes to the very same problem.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying high-quality transmission and drivetrain components directly from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with one of the most comprehensive ranges of drive shafts for the Mazda 6 on the market. Our priority is to supply precision-fit, high-grade components that give you peace of mind and restore your vehicle's reliability. By selecting your specific make, model and engine, you eliminate the guesswork and ensure you receive the correct replacement part promptly. We understand how crucial everyday vehicle reliability is, making us the trusted choice for DIY mechanics and professional garages seeking technical expertise, swift EU-wide dispatch and dependable quality. Choosing CVJoint24 means relying on genuine driveline specialists, benefiting both your car’s longevity and your pocket in the long run.

Frequently Asked Questions about Drive Shafts for Mazda 6

How do I know whether the right or left drive shaft is faulty on my Mazda 6?

Clicking noises are usually heard from the side under load; if you turn left and hear a noise, it is often the right outer CV joint that is worn. However, vibrations under acceleration may require a physical inspection to check for play in the inner joints.

Can I replace just the CV joint instead of the entire drive shaft on my Mazda 6?

Yes, in many cases you can replace just the outer or inner CV joint if the shaft bar itself is straight and undamaged. We offer both complete drive shafts and individual CV joints so you can choose the most cost-effective option.

Does the same drive shaft fit both manual and automatic Mazda 6 models?

No, drive shafts usually differ between manual and automatic gearboxes in terms of length and splines. Always select your Mazda 6 make, model and engine on our website to ensure you get the correct version.

Why does my Mazda 6 vibrate under acceleration?

This is a classic symptom of a worn inner CV joint. When play develops in the joint, it creates an imbalance that propagates as vibrations throughout the car under load, which often disappear when you release the throttle.

Is it difficult to replace a drive shaft on a Mazda 6 yourself?

It requires a range of tools and some mechanical experience, as you need to detach parts of the suspension and brakes. For an experienced DIY mechanic it is entirely feasible, but following the correct torque settings during installation is essential.

Are boots and grease included when I buy a drive shaft from you?

Yes, our complete drive shafts are supplied fully assembled with CV boots, grease and the necessary hardware so they are ready to install directly onto your car.

How does a cracked ABS ring affect my Mazda 6?

A cracked ABS ring can cause the brake pedal to pulse under normal braking or trigger the ABS warning light. Because the ring is often mounted on the drive shaft, it can sometimes be most practical to replace the complete shaft or joint if the ring is damaged.