Drive shafts for Nissan Micra

Find the right drive shaft for your Nissan Micra by selecting your specific model, year and engine. Our range covers drive shafts tailored for both early generations and modern...

Products for Drive shafts for Nissan Micra

41 products
25 - 41 of 41
Item no.:1164088
  • Position: Front left
  • Splines gearbox side: 21
  • Splines wheel side: 23
  • Total length: 608 mm
  • ABS teeth: 42
Item no.:2145948
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 23
  • Total length: 893 mm
Item no.:214447
  • Position: Front right
  • Splines gearbox side: 21
  • Splines wheel side: 21
  • Total length: 828 mm
  • Joint diameter: 71,5 mm
Item no.:119654
  • Position: Front left
  • Splines gearbox side: 21
  • Splines wheel side: 21
  • Total length: 609 mm
  • Joint diameter: 71,5 mm
Item no.:1113216
  • Position: Front left
  • Splines gearbox side: 21
  • Splines wheel side: 23
  • Total length: 610 mm
  • Joint diameter: 72 mm
Item no.:2123974
  • Position: Front right
  • Splines gearbox side: 21
  • Splines wheel side: 23
  • Total length: 821 mm
  • Joint diameter: 72 mm
Item no.:1196348
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 21
  • Total length: 843 mm
  • Joint diameter: 71,5 mm
Item no.:2175795
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 21
  • Total length: 599 mm
  • Joint diameter: 71,5 mm
Item no.:1150914
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 23
  • Total length: 595 mm
  • Joint diameter: 81 mm
Item no.:2142588
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 23
  • Total length: 840 mm
  • Joint diameter: 81 mm
Item no.:2176405
  • Position: Front right
  • Splines wheel side: 23
  • Total length: 840 mm
  • Joint diameter: 81 mm
  • ABS teeth: 42
Item no.:1194218
  • Position: Front left
  • Splines gearbox side: 21
  • Splines wheel side: 23
  • Total length: 608 mm
  • Joint diameter: 72 mm
Item no.:2193654
  • Position: Front right
  • Splines gearbox side: 21
  • Splines wheel side: 23
  • Total length: 825 mm
  • Joint diameter: 72 mm
Item no.:1127045
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 23
  • Total length: 595 mm
  • Joint diameter: 72 mm
Item no.:2110366
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 23
  • Total length: 838 mm
  • Joint diameter: 72 mm
Item no.:1130998
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 23
  • Total length: 595 mm
  • ABS teeth: 42
Item no.:2167455
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 23
  • Total length: 838 mm
  • ABS teeth: 42
Showing 25–41 of 41 products

Drive shafts for Nissan Micra

The Nissan Micra is an iconic small car that requires dependable components to maintain its characteristic agility and reliability in demanding urban traffic. The drive shaft is a vital link in the car's power transmission, and here at CVJoint24 you will find an extensive and carefully selected range engineered specifically for this model. We focus exclusively on offering parts that meet the highest standards of mechanical durability and geometric precision, which is crucial for a vehicle subjected to frequent stop-start driving. By choosing the right components from a driveline specialist, you ensure that your vehicle's drivetrain remains efficient and safe for years to come, whatever the driving conditions.

What does a drive shaft do on a Nissan Micra?

The primary and most vital task of the drive shaft on a front-wheel-drive car such as the Nissan Micra is to transfer torque from the gearbox directly to the front wheels. This assembly consists of a robust shaft bar fitted with two technically sophisticated joints: an inner joint positioned by the gearbox and an outer joint at the wheel hub. These joints are designed to allow the shaft to change angles continuously as the wheels steer and the suspension moves up and down during driving. Without fully functioning drive shafts, engine power could never reach the road in a controlled manner, making them among the most central components in your vehicle's drivetrain.

Common signs of wear

There are several clear warning signs indicating that a driveshaft on your Nissan Micra is nearing the end of its service life. One of the most common symptoms is a rhythmic, metallic clicking noise that is clearly audible when taking sharp corners at low speed, which almost always points to a worn outer CV joint. If you instead experience noticeable vibrations through the steering wheel or the entire bodywork during hard acceleration, the inner joint may have developed excessive play. It is also essential to inspect the CV boots regularly; if these rubber boots split, vital lubricating grease escapes while road grit and moisture penetrate inside. This dramatically accelerates wear and quickly leads to complete failure, requiring a replacement shaft assembly.

How to choose the right drive shaft

Identifying and selecting the correct drive shaft for a Nissan Micra can be a technical challenge because specifications vary widely depending on the engine, gearbox type and specific model year. The most reliable and straightforward way to ensure an exact fit is to select your car's make, model and engine in our vehicle filter. This matches technical parameters such as the shaft's precise overall length, the number of splines and whether the vehicle is equipped with an anti-lock braking system. Because we stock multiple variations, it is critical to verify whether your specific car requires a shaft with a pre-fitted ABS ring or if it uses an alternative wheel speed sensor configuration. Keep in mind, too, that the left and right sides are usually different lengths.

Related components to inspect

We also recommend checking these specific pages for your vehicle when replacing a drive shaft:

When one drivetrain component shows signs of wear, nearby parts on the vehicle often warrant inspection as well. Comparing these exact pages for the Nissan Micra makes it easier to establish whether the problem lies with the drive shaft itself or with an adjacent part of the transmission system.

This is especially relevant on models where vibrations, play and strange noises can transfer symptoms across several parts in the same drivetrain. A quick check of related categories reduces the risk of replacing the right type of part while overlooking a related component that causes the same symptoms.

By taking a proactive approach and also inspecting the condition of the gearbox drive shaft oil seals during installation, you ensure a leak-free and long-lasting repair.

Why buy from CVJoint24?

As the international shop of a Swedish driveline specialist shipping across the EU from Helsingborg, Sweden, we offer technical expertise that generic car parts suppliers rarely match. We have an in-depth understanding of the specific drivetrain challenges on the Nissan Micra and have built a comprehensive catalogue to meet every requirement. By combining high-grade product quality with our accurate vehicle selector based on make, model and engine, we provide the confidence you need to carry out a correct, durable repair. We are dedicated to supplying precision-engineered parts, minimising the risk of incorrect orders and getting your car safely back on the road without delay.

Frequently Asked Questions about Drive Shafts for Nissan Micra – Find the Right Part for Your Car

How do I know if the drive shaft on my Nissan Micra is faulty?

The most common signs are a clicking noise when taking sharp turns or vibrations during acceleration. You should also check whether the CV boots are split or if grease is leaking around the wheels.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, on many Nissan Micra models you can replace solely the outer or inner CV joint if the shaft bar itself is undamaged. This is often a cost-effective alternative.

Is there a difference between drive shafts for manual and automatic Nissan Micra models?

Yes, there is often a difference in both length and spline design between manual and automatic gearboxes. Always select your car's make, model and engine to find the correct version.

Is an ABS ring included when I purchase a new drive shaft?

It depends on the specific item. Certain drive shafts for Nissan Micra are supplied with a pre-fitted ABS ring, whilst others require you to transfer the old one or purchase a new ring separately.

Why does my car vibrate under acceleration after lowering it?

Lowering a Nissan Micra alters the angles of the drive shafts, which can place greater strain on the inner joints and cause vibrations if they are already slightly worn.