Drive shafts for Nissan

Here you will find drive shafts for a wide range of Nissan models, from the classic Micra and Sunny to robust Navara pickups. The range includes components engineered for front-wheel,...

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Drive shafts for Nissan

1,098 products
625 - 648 of 1098
Item no.:114578
  • Splines gearbox side: 32
  • Splines wheel side: 22
  • Total length: 410 mm
Item no.:1186041
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 620 mm
  • Joint diameter: 90 mm
Item no.:2135635
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 916 mm
  • Joint diameter: 81 mm
Item no.:0149712
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 908 mm
  • ABS teeth: 44
Item no.:1192606
  • Position: Front left
  • Splines gearbox side: 28
  • Splines wheel side: 29
  • Total length: 690 mm
  • Joint diameter: 94 mm
Item no.:2146934
  • Position: Front right
  • Splines gearbox side: 28
  • Splines wheel side: 29
  • Total length: 1,005 mm
  • Joint diameter: 94 mm
Item no.:2100583
  • Position: Front right
  • Splines gearbox side: 39
  • Splines wheel side: 29
  • Total length: 1,017 mm
  • Joint diameter: 94 mm
Item no.:1152046
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 605 mm
  • ABS teeth: 44
Item no.:7308177
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 605 mm
  • Diameter 1: 89 mm
Item no.:2172834
  • Splines gearbox side: 39
  • Splines wheel side: 28
  • Total length: 1,017 mm
  • Thread size: M24x1.5
  • ABS teeth: 51
Item no.:219992
  • Position: Front right
  • Splines wheel side: 29
  • Total length: 655 mm
  • ABS teeth: 44
Item no.:1102050
  • Splines gearbox side: 28
  • Splines wheel side: 31
  • Total length: 936 mm
Item no.:115118
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 619 mm
  • Joint diameter: 84 mm
Item no.:7317248
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 963 mm
  • Joint diameter: 84 mm
Item no.:319296
  • Position: Front
  • Splines wheel side: 28
  • Total length: 522 mm
  • Joint diameter: 95 mm
  • Joint diameter, gearbox side: 90 mm
Item no.:2120853
  • Splines wheel side: 29
  • Total length: 550 mm
  • Joint diameter, gearbox side: 130 mm
  • ABS teeth: 44
Item no.:317538
  • Position: Front
  • Splines wheel side: 28
  • Total length: 521 mm
Item no.:216853
  • Position: Front right
  • Splines gearbox side: 39
  • Splines wheel side: 27
  • Total length: 1,015 mm
  • Joint diameter: 91 mm
Item no.:114049
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • Total length: 675 mm
  • Joint diameter: 91 mm
Item no.:316534
  • Splines gearbox side: 27
  • Splines wheel side: 29
  • Total length: 660 mm
  • Thread size: M24x1.5
Item no.:312675
  • Position: Front
  • Splines wheel side: 28
  • Total length: 565 mm
  • Joint diameter: 95 mm
  • Joint diameter, gearbox side: 124 mm
Item no.:119073
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 931 mm
  • Joint diameter: 90 mm
Item no.:215635
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 27
  • Total length: 635 mm
  • Joint diameter: 90 mm
Item no.:1112459
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 27
  • Total length: 936 mm
  • Diameter 1: 90 mm
Showing 625–648 of 1098 products

Drive shafts for Nissan

Nissan is a brand associated with both innovation and reliability, and its drivetrains are no exception. The drive shaft is a critical component in your car's power transmission system, responsible for transferring engine power from the gearbox out to the wheels while accommodating suspension movement and steering. For Nissan owners, a defective drive shaft causes not only poor ride comfort but also a genuine safety risk. At CVJoint24, you will find an extensive range of drive shafts specifically matched to Nissan. With comprehensive stock ready to dispatch across Europe from our warehouse in Helsingborg, Sweden, we cover everything from dependable older workhorses to the latest models. As driveline specialists, we understand the technical demands placed on these components, whether for a front-wheel-drive city car or an all-wheel-drive SUV. Our goal is to supply car parts that match or exceed original equipment standards, allowing you to drive your Nissan with total confidence in its mechanical integrity. By focusing on specialist expertise, we ensure that our parts are built to endure demanding European road conditions where salt and road grit place high demands on material quality and surface protection.

How drive shafts differ between Nissan models

There are significant differences between drive shafts depending on the Nissan model you drive. For example, a drive shaft for a Nissan Micra is engineered to be lightweight and compact to suit a smaller car with limited space, whereas a shaft for a Nissan Navara or X-Trail must be considerably sturdier to cope with higher loads and torque, especially during off-road driving or towing heavy trailers. The differences go far beyond physical size; the number of splines—the small teeth on each end of the shaft—varies between engine options and gearbox types. The length of the shaft is also critical and can differ by just a few millimetres between model years, making precision essential when selecting replacement parts. Some Nissan models also feature unique designs for how the ABS ring is mounted or how the inner joint connects to the differential. Understanding these model-specific details is what sets us apart from general car parts retailers. We make sure you receive a part that not only looks right on screen, but actually operates seamlessly with the rest of your vehicle's drivetrain.

Common signs of wear

Identifying drive shaft issues early can save you significant time and expense. The most classic symptom of a worn outer CV joint is a clicking or knocking noise clearly audible when cornering, especially under acceleration. If the sound stops when driving in a straight line, the constant velocity joint is almost certainly the culprit. Vibrations are another common symptom, but these often originate from the inner CV joint or an imbalance in the driveshaft itself. These vibrations are usually most pronounced under acceleration and can resonate through the entire chassis. Damaged CV boots are another vital warning sign. If a boot splits, dirt and water enter the joint while essential grease is thrown out, leading to rapid failure of the internal bearing surfaces. If you spot grease splatters inside the wheel arch or on the wheel rim, inspect the assembly immediately. Replacing a complete Drive shaft rather than simply patching up a single component ensures the whole assembly is in fresh condition, reducing the risk of consequential failures.

How to choose the correct drive shaft for your Nissan

To ensure you get the exact match for your car, start by selecting your car's make, model and engine variant in our vehicle selector. This is the most reliable way to filter down to the products engineered for your specific Nissan. However, several other factors must also be kept in mind. Always check whether your car has a manual or an automatic gearbox, as this often alters the design of the shaft at the gearbox interface. Another crucial factor is identifying which side has failed; left and right drive shafts are rarely interchangeable because gearboxes are typically mounted off-centre in the engine bay. It is also wise to check the condition of your ABS rings for Nissan during the replacement, as these can corrode or crack and trigger ABS faults. At CVJoint24, we provide detailed technical data such as overall length and spline counts so you can easily cross-reference with your existing part if needed. Our approach ensures you have all the facts required to order correctly first time, saving valuable time during installation.

Popular Nissan models to explore

Continue to the right Nissan model for your drive shaft:

When the range is comprehensive, choosing your exact model is the ideal next step. Selecting your vehicle brings up a page tailored precisely to the correct fitment, drivetrain configuration, and parts designed for your car.

Alongside these popular variants, we also see consistent demand for components for the Nissan X-Trail, Juke and Note. Whichever model you drive, we aim to keep the correct part on the shelf ready for swift dispatch across the EU. Moving to a model-specific page allows you to view the exact technical specifications that apply to your vehicle's driveline, providing extra peace of mind throughout the buying process. Our catalogue is built to guide you accurately based on our extensive specialist knowledge.

Why shop at CVJoint24

Buying from CVJoint24 means partnering with dedicated driveline specialists. We are not just a generic car parts retailer; we are a Swedish driveline specialist shipping directly from our central warehouse in Helsingborg to customers across the European Union, putting quality and exact fitment first. Our fitment guarantee means you can order with complete confidence when selecting your vehicle's make, model and engine—we ensure the part matches your Nissan. With a focus on speed, our stocked items are dispatched promptly, because we know how essential it is to get your car back on the road quickly. Our range is carefully curated to withstand demanding conditions, partnering exclusively with manufacturers who maintain rigorous manufacturing precision. With CVJoint24, you receive the right spare parts at competitive prices, backed by true technical expertise. We provide detailed specifications and the most relevant components for your car's drivetrain, making us the trusted choice for DIY mechanics and professional garages alike.

Frequently Asked Questions about Drive Shafts for Nissan

How do I know if my Nissan needs a new drive shaft?

The most common signs are clicking noises when turning, vibrations under acceleration or visible grease leaking from split CV boots. If you notice any of these symptoms, you should inspect the drive shaft without delay.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, in many cases it is possible to replace only the inner or outer CV joint. However, on many modern Nissan models, it is often more time-efficient and reliable to replace the complete driveshaft as a single assembly.

Does the same drive shaft fit both the left and right side of my Nissan?

Usually not. Due to the position of the gearbox, drive shafts are typically different lengths. Always check the product description to confirm whether the part is intended for the driver's side or the passenger's side.

What is included when I buy a complete drive shaft from you?

Our complete drive shafts are supplied fully assembled with inner and outer CV joints, boots, grease, and any necessary fitting accessories such as axle nuts or circlips where required.

How does your fitment guarantee work for Nissan parts?

When you select your vehicle's make, model, and engine, our system matches the parts to your car's technical specifications. If you purchase a part recommended by our system and it unexpectedly does not fit, we will help you find the correct part at no extra charge.

Why is it important to check the ABS ring when replacing a drive shaft?

On many Nissan models, the ABS ring is mounted directly on the drive shaft. If the reluctor ring is cracked or corroded, it can trigger fault codes in the braking system. Many of our replacement drive shafts come with a pre-fitted ABS ring.