Drive shafts for Nissan X Trail

Find the right drive shaft for your Nissan X-Trail. This range covers components for a wide variety of versions, including both front-wheel-drive models and four-wheel-drive SUVs with...

Products for Drive shafts for Nissan X Trail

35 products
1 - 24 of 35
Item no.:2105328
  • Position: Front right
  • Total length: 962 mm
  • Splines gearbox side: 27
  • Splines wheel side: 29
Item no.:1128684
  • Position: Front left
  • Total length: 620 mm
  • Splines gearbox side: 29
  • Splines wheel side: 29
  • ABS teeth: 44
Item no.:2164049
  • Position: Front right
  • Flange diameter: 137 mm
  • Total length: 547 mm
  • Splines wheel side: 29
  • ABS teeth: 44
Item no.:217871
  • Position: Front right
  • Total length: 443 mm
  • Splines gearbox side: 29
Item no.:411392
  • Position: Rear
  • Total length: 792 mm
  • Splines gearbox side: 21
  • Splines wheel side: 29
  • ABS teeth: 44
Item no.:1136804
  • Position: Front left
  • Total length: 645 mm
  • Splines gearbox side: 29
  • Splines wheel side: 29
  • ABS teeth: 44
Item no.:2120942
  • Position: Front right
  • Total length: 1,016 mm
  • Splines gearbox side: 29
  • Splines wheel side: 29
Item no.:1197332
  • Position: Front left
  • Total length: 711 mm
  • Splines gearbox side: 27
  • Splines wheel side: 29
Item no.:6122070
  • Position: Rear left, Rear right
  • Total length: 801 mm
  • Splines gearbox side: 21
  • Splines wheel side: 25
  • ABS teeth: 48
Item no.:2137474
  • Position: Front right
  • Total length: 969 mm
  • Splines gearbox side: 27
  • Splines wheel side: 29
Item no.:1199032
  • Position: Front left
  • Total length: 615 mm
  • Splines gearbox side: 29
  • Splines wheel side: 29
Item no.:2148038
  • Position: Front right
  • Total length: 1,006 mm
  • Splines gearbox side: 29
  • Splines wheel side: 29
Item no.:1111235
  • Position: Front left
  • Total length: 645 mm
  • Splines gearbox side: 30
  • Splines wheel side: 29
Item no.:2173998
  • Position: Front right
  • Total length: 975 mm
  • Splines gearbox side: 30
  • Splines wheel side: 29
Item no.:1129388
  • Position: Front left
  • Total length: 676 mm
  • Splines gearbox side: 29
  • Splines wheel side: 29
Item no.:2128100
  • Position: Front right
  • Total length: 985 mm
  • Splines gearbox side: 29
  • Splines wheel side: 29
Item no.:1109259
  • Position: Front left
  • Total length: 667 mm
  • Splines gearbox side: 27
  • Splines wheel side: 29
Item no.:1176165
  • Position: Front left
  • Total length: 605 mm
  • Splines gearbox side: 29
  • Splines wheel side: 29
Item no.:219241
  • Position: Front right
  • Total length: 655 mm
  • Splines wheel side: 29
  • ABS teeth: 44
Item no.:619136
  • Total length: 818 mm
  • Splines gearbox side: 21
  • Splines wheel side: 25
  • ABS teeth: 48
Item no.:115373
  • Position: Front left
  • Total length: 692 mm
  • Splines gearbox side: 27
  • Splines wheel side: 29
Item no.:110558
  • Position: Front left
  • Total length: 655 mm
  • Splines gearbox side: 29
  • Splines wheel side: 29
Item no.:217007
  • Position: Front right
  • Total length: 1,003 mm
  • Splines gearbox side: 29
  • Splines wheel side: 29
Item no.:211646
  • Position: Front right
  • Total length: 942 mm
  • Splines gearbox side: 27
  • Splines wheel side: 29
Showing 1–24 of 35 products

Drive shaft for Nissan X Trail

The drive shaft is one of the most heavily stressed components in your Nissan X Trail, especially if you utilise the vehicle's four-wheel-drive system and off-road capabilities. We offer a wide range of 16 specific drive shafts tailored to meet or exceed original specifications. Whether your car is used for towing heavy trailers, city driving or adventures off the beaten track, a robust shaft is required to withstand the torque from the engine. By choosing the right part, you ensure power reaches the wheels without loss or strange noises, maintaining the vehicle's characteristic driving pleasure and stability. We stock components for both front-wheel-drive and four-wheel-drive versions, making us a complete partner for your car's maintenance.

What does a drive shaft do on a Nissan X Trail?

The primary task of the drive shaft on a Nissan X Trail is to transfer rotational energy from the gearbox or differential directly to the wheel hubs. On models with four-wheel drive, the system is more complex, as power is distributed between the front and rear axles. The driveshaft consists of a steel bar with CV joints at both ends, allowing the wheels to move up and down with the suspension and steer on the front axle. Without a functioning drive shaft, the car cannot move forward, and a defective shaft can, in the worst case, lead to total failure of the transmission. The choice of materials in our shafts is optimised to withstand the stresses arising from both high-speed motorway cruising and demanding off-road driving.

Common signs of wear

There are several clear signs that a drive shaft is beginning to fail on your Nissan X Trail. One of the most common symptoms is a clicking or knocking noise during sharp turns, which often indicates wear in the outer constant velocity joint. If you experience vibrations through the steering wheel or the entire bodywork during acceleration, the inner joint may be to blame instead. It is also vital to inspect the CV boots; if these split, grease leaks out and dirt enters, rapidly destroying the shaft's moving components. If you spot grease splatters on the inside of the wheel rim, it is high time to inspect the entire drive shaft assembly to prevent consequential damage to other drivetrain components.

How to choose the correct drive shaft

Finding the right drive shaft among our 16 options requires precision. The Nissan X Trail has been manufactured across several generations with different engine options and gearboxes, which affects the shaft length and the number of splines at the ends. The most reliable way to select the correct component is to filter by your car's exact make, model and engine variant. This ensures you find the parts that are technically compatible with your vehicle. Also check whether your car is equipped with ABS, as some shafts come with a pre-mounted ABS ring while others do not. The correct fit is essential for both safety and durability, and we guarantee that our recommended parts match your vehicle's specifications.

Related parts to inspect

Feel free to also check these exact pages for the same car when working on the drive shaft:

When a drivetrain component shows signs of wear, related parts on the same car often need checking as well. Comparing these exact pages for the Nissan X Trail makes it easier to determine whether the issue lies specifically within the drive shaft or in an adjacent part of the drivetrain.

This is particularly relevant on models where vibrations, play and noises can shift symptoms between multiple parts within the same drivetrain. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent part that affects the same fault.

When replacing a drive shaft, it is often economically and technically advantageous to review related components. If one shaft has failed, it may indicate that the other side or the propeller shaft is also beginning to wear. Here is a list of parts specifically matched to your model:

  • Nissan X Trail - Overview of all drivetrain parts
  • Outer CV joint for Nissan X Trail - If you only need to replace the joint
  • Inner CV joint for Nissan X Trail - To resolve vibrations
  • Propeller shaft for Nissan X Trail - For four-wheel-drive models
  • ABS rings for Nissan X Trail - If the reluctor ring is damaged
By inspecting these parts at the same time, you reduce the risk of future garage visits and ensure a smooth, harmonious drivetrain.

Why shop at CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching directly across the EU from our central warehouse in Helsingborg, Sweden. We understand the technical challenges of the Nissan X Trail and have built a catalogue with extensive category depth so you can always find the correct component. Our expertise spans from simple CV boots to complete drive shafts and prop shafts. Selecting your vehicle's exact make, model and engine minimises the risk of incorrect purchases, saving you both time and money. When you buy from us, you receive not only a spare part, but also the confidence that every product has been carefully selected by specialists who know drivetrains inside out. We focus on quality and fast dispatch so your car can get safely back on the road.

Frequently asked questions about drive shafts for Nissan X Trail

How do I know if my Nissan X Trail needs a new drive shaft?

The most common signs are clicking noises when turning, vibrations under acceleration, or visible grease leaks from split CV boots.

Is there a difference between drive shafts for manual and automatic gearboxes?

Yes, the length of the shaft and the number of splines can vary depending on the gearbox type and engine configuration.

Can I replace just one drive shaft or do both have to be replaced at the same time?

It is perfectly fine to replace only the faulty shaft, but we recommend inspecting the condition of the CV boots on the other side at the same time.

What is included when I buy a complete drive shaft from you?

Our complete drive shafts are supplied fully assembled with both the inner and outer CV joint as well as boots, ready for direct installation.

How do I find the right drive shaft for my specific model year?

Select your vehicle's make, model and engine in our store. This is the most reliable way to identify the correct part for your Nissan X Trail.

Why does my Nissan X Trail vibrate during acceleration?

This is often caused by wear in the inner CV joint, creating an imbalance in the driveshaft when engine torque is transferred.