Nissan X Trail
Car parts and drivetrain components for Nissan X Trail.
Products for Nissan X Trail
- Position: Rear, Inner
- Seal diameter: 38 mm
- Inner splines: 24
- Diameter: 38 mm
- Splines gearbox side: 21
- Position: Front right
- Total length: 962 mm
- Splines gearbox side: 27
- Splines wheel side: 29
- Position: Front left
- Total length: 620 mm
- Splines gearbox side: 29
- Splines wheel side: 29
- ABS teeth: 44
- Position: Front right
- Flange diameter: 137 mm
- Total length: 547 mm
- Splines wheel side: 29
- ABS teeth: 44
- Position: Outer
- ABS teeth: 44
- Seal diameter: 56 mm
- Inner splines: 25
- Outer splines: 29
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 2,025 mm
- Position: Front right
- Total length: 443 mm
- Splines gearbox side: 29
- Position: Rear
- Total length: 792 mm
- Splines gearbox side: 21
- Splines wheel side: 29
- ABS teeth: 44
- Position: Rear, Outer
- Inner splines: 24
- Splines wheel side: 29
- ABS teeth: 44
- Position: Front left
- Total length: 645 mm
- Splines gearbox side: 29
- Splines wheel side: 29
- ABS teeth: 44
- Position: Front right
- Total length: 1,016 mm
- Splines gearbox side: 29
- Splines wheel side: 29
- Position: Front left
- Total length: 711 mm
- Splines gearbox side: 27
- Splines wheel side: 29
- Position: Front, Outer
- Inner splines: 35
- Total length: 163 mm
- Splines wheel side: 29
- ABS teeth: 35
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 2,040 mm
- Position: Rear left, Rear right
- Total length: 801 mm
- Splines gearbox side: 21
- Splines wheel side: 25
- ABS teeth: 48
- Position: Front right
- Total length: 969 mm
- Splines gearbox side: 27
- Splines wheel side: 29
- Position: Outer
- Seal diameter: 62 mm
- Inner splines: 35
- Outer splines: 29
- Joint diameter: 163 mm
Frequently Asked Questions about Drivetrain Parts for Nissan X Trail
How do I know if the inner or outer CV joint is failing on my Nissan X Trail?
A worn outer CV joint typically produces a clicking or knocking noise during sharp turns. An inner CV joint tends to cause vibrations through the car's chassis during acceleration, whether you are turning or driving straight ahead.
Do all drive shafts fit every Nissan X Trail model?
No, drive shafts vary depending on engine size, gearbox type (manual or automatic), and whether the car is front-wheel drive or four-wheel drive. Always select your car's exact model, year and engine variant to find the correct part.
Why does my Nissan X Trail vibrate at higher speeds?
Vibrations at higher speeds can often be traced to an imbalance or wear in the propeller shaft, especially on four-wheel-drive models. It can also stem from worn inner CV joints or unbalanced wheels.
Can I replace just the ABS ring on my Nissan X Trail?
Yes, if the CV joint itself is in good condition but the ABS ring has cracked or corroded, you can replace just the ring. This is a common, cost-effective repair to clear the ABS warning light.
What happens if a drive shaft snaps while driving?
If a drive shaft snaps, the car loses drive to that wheel. In a front-wheel-drive car, this leaves you stranded. It can also cause secondary damage to surrounding components such as brake hoses and suspension parts.
How often should I inspect the CV boots on my Nissan X Trail?
We recommend inspecting the CV boots at every service or seasonal tyre change. Even a small tear quickly lets dirt and moisture in, destroying the constant velocity joint and leading to a much more expensive repair.