Drive shafts for Opel Corsa E

Find the right drive shaft for your Opel Corsa E, whether your car is powered by a petrol or LPG engine. Our range covers dedicated driveshafts suited to hatchback models from 2014...

Products for Drive shafts for Opel Corsa E

13 products
1 - 13 of 13
Item no.:1169599
  • Position: Front left
  • Total length: 615 mm
  • Splines gearbox side: 22
  • Splines wheel side: 22
Item no.:2196572
  • Position: Front right
  • Total length: 920 mm
  • Splines gearbox side: 22
  • Splines wheel side: 22
Item no.:1146951
  • Position: Front left
  • Total length: 579 mm
  • Splines gearbox side: 25
  • Splines wheel side: 25
Item no.:2122860
  • Position: Front right
  • Total length: 952 mm
  • Splines gearbox side: 25
  • Splines wheel side: 25
Item no.:115642
  • Position: Front left
  • Diameter: 79 mm
  • Total length: 608 mm
  • Splines gearbox side: 22
  • Splines wheel side: 25
Item no.:218943
  • Position: Front right
  • Total length: 930 mm
  • Splines gearbox side: 22
  • Splines wheel side: 25
Item no.:2158359
  • Position: Front right
  • Total length: 919 mm
  • Splines gearbox side: 25
  • Splines wheel side: 22
Item no.:1181636
  • Position: Front left
  • Total length: 585 mm
  • Splines gearbox side: 25
  • Splines wheel side: 25
Item no.:2184918
  • Position: Front right
  • Total length: 610 mm
  • Splines gearbox side: 34
  • Splines wheel side: 25
Item no.:219171
  • Position: Front right
  • Total length: 616 mm
  • Splines gearbox side: 34
  • Splines wheel side: 30
  • ABS teeth: 0
Item no.:210589
  • Total length: 955 mm
  • Splines gearbox side: 25
  • Splines wheel side: 25
Item no.:2151316
  • Position: Front right
  • Total length: 886 mm
  • Splines gearbox side: 22
  • Splines wheel side: 22
Item no.:117746
  • Position: Front left
  • Diameter: 79 mm
  • Total length: 608 mm
  • Splines gearbox side: 22
  • Splines wheel side: 25

Drive shafts for Opel Corsa E

The drive shaft is a critical component in your Opel Corsa E, responsible for transferring torque directly from the gearbox to the front wheels. Because the Corsa E is a compact car built with an emphasis on efficiency and driving pleasure, the drive shafts are subjected to continuous stress during both acceleration and cornering. We offer a range of 8 dedicated items for this model, ensuring coverage for most engine variants and model years from 2014 onwards. Choosing a driveshaft with the correct specifications is vital to avoid future problems with drivetrain vibrations or noises. Our goal is to provide components that match or exceed original equipment performance for lasting durability.

What does a drive shaft do on an Opel Corsa E?

On a front-wheel-drive car such as the Opel Corsa E, the drive shaft serves as the final link in the power transmission. It consists of a shaft with two joints: an inner joint at the gearbox and an outer joint at the wheel hub. These joints allow the shaft to move up and down with the suspension and articulate as you steer. Without a functioning drive shaft, power from the engine cannot reach the road, rendering the car undriveable. The quality of the shaft material and the precision of the joints determine how well the component withstands European road conditions, where road salt and grit frequently wear out protective boots and cause corrosion.

Common signs of wear

There are several clear warning signs indicating that a drive shaft on your Opel Corsa E is starting to fail. One of the most common symptoms is vibration felt through the steering wheel or throughout the body under acceleration. If you hear a clicking or knocking sound on full steering lock, this often indicates a worn outer CV joint. Another sign is greasy splatter on the inside of the wheel rim or inside the wheel arch, pointing to a split CV boot where the grease has escaped. If left unaddressed, dirt will penetrate the joint, quickly leading to complete drive shaft failure and potentially more expensive repairs.

How to choose the right drive shaft

Identifying the exact drive shaft that fits your Opel Corsa E can be challenging, as differences depend on engine capacity, gearbox type, and whether the car uses an ABS system with specific reluctor rings. The most reliable way to find the correct part is to select your car's make, model and engine in our vehicle filter. This filters our range to display only the components that are technically compatible with your specific car. If you are verifying the part manually, always check the shaft length and the spline counts on both the inner and outer ends, as these measurements are essential for correct fitment. Keep in mind that differences exist between the left and right sides, with one shaft typically longer than the other.

Related parts to check

Feel free to check these exact pages for the same vehicle when working on the drive shaft:

When a drivetrain component shows signs of wear, adjacent parts on the same vehicle often require inspection too. By comparing these exact pages for Opel Corsa E, it becomes easier to determine whether the fault lies in the drive shaft itself or in a neighbouring part of the transmission.

This is particularly relevant on models where vibrations, play and noises can transfer symptoms across several driveline components. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that contributes to the same issue.

By inspecting the complete assembly, you save time and minimise the risk of future garage visits caused by secondary failures.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline and power transmission specialist with its warehouse in Helsingborg, Sweden. We understand how important it is to get the correct part for your Opel Corsa E first time; that is why we focus on high product accuracy and an in-depth range that surpasses generic car parts retailers. With our technical expertise and commitment to quality, we supply solutions designed to last. Our vehicle selector allows you to filter with confidence by make, model and engine, eliminating guesswork around fitment. When you shop with us, you receive not just a spare part, but access to knowledge from specialists dedicated to keeping your car on the road with safe and reliable components.

Frequently asked questions about drive shafts for Opel Corsa E

How do I know if my Opel Corsa E needs a new drive shaft?

Common signs include vibrations under acceleration, clicking noises when turning, or visible damage to the drive shaft boots where grease has leaked out.

Can I replace just the outer CV joint instead of the entire shaft?

Yes, if the shaft itself is straight and undamaged, you can often save money by replacing only the outer CV joint.

Does the same drive shaft fit all Corsa E models?

No, it varies depending on the engine (e.g. 1.2 or 1.4 Turbo) and gearbox. Always select your vehicle's exact make, model and engine to find the right part.

What happens if I drive with a damaged drive shaft?

A damaged drive shaft can eventually fail completely, causing the car to lose drive and potentially damaging other suspension components.

Is it difficult to replace a drive shaft on a Corsa E yourself?

It requires certain tools and technical know-how. We recommend following the car's workshop manual carefully to ensure correct tightening torques.

Are the boot and grease included when I buy a complete drive shaft?

Yes, our complete drive shafts are supplied fully assembled with boots, joints and the correct amount of grease for direct installation.