Drive shafts for Opel Meriva B

Find the right drive shaft for your Opel Meriva B by filtering by your specific engine option, whether it is the 1.4 petrol, 1.4 LPG, or one of the diesel variants such as the 1.3 CDTI...

Products for Drive shafts for Opel Meriva B

25 products
1 - 24 of 25
Item no.:1185717
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 33
  • Total length: 575 mm
Item no.:214539
  • Splines gearbox side: 25
  • Splines wheel side: 34
  • Total length: 444 mm
Item no.:1122424
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 33
  • Total length: 589 mm
  • Diameter 1: 85 mm
Item no.:2150871
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 560 mm
Item no.:2110094
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 561 mm
  • Joint diameter: 84,5 mm
Item no.:1121771
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 33
  • Total length: 597 mm
  • Joint diameter: 81 mm
Item no.:2144691
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 33
  • Total length: 965 mm
  • Joint diameter: 85 mm
Item no.:2186720
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 33
  • Total length: 953 mm
  • Diameter 1: 82 mm
Item no.:2144725
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 571 mm
  • Joint diameter: 91 mm
Item no.:1183550
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 33
  • Total length: 605 mm
  • Diameter 1: 79 mm
Item no.:1156276
  • Position: Front left
  • Splines gearbox side: 25
  • Splines wheel side: 33
  • Total length: 580 mm
  • Joint diameter: 91 mm
Item no.:2167405
  • Position: Front right
  • Splines gearbox side: 27
  • Splines wheel side: 33
  • Total length: 585 mm
  • Diameter 1: 91 mm
Item no.:2160009
  • Position: Front right
  • Splines gearbox side: 25
  • Splines wheel side: 33
  • Total length: 980 mm
  • Diameter 1: 91 mm
Item no.:219890
  • Splines gearbox side: 22
  • Splines wheel side: 33
  • Total length: 963 mm
  • Joint diameter: 79 mm
  • Joint diameter, gearbox side: 82 mm
Item no.:1121772
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 33
  • Total length: 596 mm
  • ABS teeth: 29
Item no.:311349
  • Position: Front left
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 614 mm
  • Joint diameter: 91 mm
Item no.:117232
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 33
  • Total length: 610 mm
  • Joint diameter: 82 mm
Item no.:319392
  • Position: Front
  • Splines gearbox side: 27
  • Splines wheel side: 30
  • Total length: 615 mm
  • Joint diameter, gearbox side: 86 mm
Item no.:113028
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 33
  • Total length: 612 mm
  • Joint diameter, gearbox side: 82 mm
Item no.:212447
  • Splines gearbox side: 25
  • Splines wheel side: 34
  • Total length: 444 mm
Item no.:2114412
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 571 mm
  • Joint diameter: 91 mm
Item no.:216691
  • Splines gearbox side: 22
  • Splines wheel side: 33
  • Total length: 963 mm
  • Joint diameter: 79 mm
  • Joint diameter, gearbox side: 82 mm
Item no.:215602
  • Splines gearbox side: 25
  • Splines wheel side: 34
  • Total length: 444 mm
Item no.:2180606
  • Position: Front right
  • Splines gearbox side: 34
  • Splines wheel side: 33
  • Total length: 571 mm
  • Joint diameter: 91 mm
Showing 1–24 of 25 products

Drive shafts for Opel Meriva B

The Opel Meriva B is a popular and practical family car renowned for its innovative flex-doors and versatile interior. To maintain the vehicle's driving dynamics and safety, it is essential that the power transmission operates smoothly. A drive shaft for Opel Meriva B is exposed to heavy mechanical stresses on a daily basis, particularly during urban driving with frequent stop-start cycles. At CVJoint24, we understand the importance of supplying components that strictly match original specifications for this specific model. Our selection covers everything from the smaller petrol engines to the high-torque diesel variants, ensuring that your vehicle receives the long-term durability it deserves.

When you choose a drive shaft from us, you obtain a component engineered to withstand the specific torque loads found in a front-wheel-drive MPV. Because the Meriva B features a distinctive chassis design, maintaining the build quality of driveline parts is vital. We stock parts thoroughly tested to handle demanding European road conditions and the harsh wear caused by salted winter roads on the vehicle's underside.

What does a drive shaft do on an Opel Meriva B?

The primary task of the drive shaft on your Opel Meriva B is to transfer engine torque from the gearbox directly to the driven front wheels, allowing the vehicle to move forwards and backwards. It is a precision component comprising an axle shaft fitted with two joints: an inner CV joint against the gearbox and an outer constant velocity joint facing the wheel hub. These joints allow the driven wheels to move up and down with the suspension travel and turn with the steering, all whilst transmitting continuous rotational force.

Without an intact drive shaft, your car would be rendered stationary, as engine torque would never reach the road surface. On the Meriva B, driveshafts are precisely sized to deliver smooth, vibration-free operation, which is fundamental to overall ride comfort. A healthy shaft also helps reduce wear on neighbouring drivetrain components, such as gearbox output shaft seals and wheel bearings, by preventing imbalances and excessive road vibrations.

Common signs of wear

Several clear symptoms indicate that a drive shaft on your Opel Meriva B is reaching the end of its service life. One of the most typical signs is noticeable vibration felt through the car body or steering wheel during acceleration. These vibrations frequently occur when the inner CV joint develops play or the shaft itself becomes unbalanced. If the vibration ceases immediately once you release the accelerator pedal, it points directly towards a worn driveshaft assembly.

Another classic warning sign is a rhythmic clicking or knocking noise audible when negotiating sharp turns at low speed, such as when parking. This usually indicates that the outer CV joint is worn. You should also regularly inspect the CV boots; if these are split or torn, lubricating grease escapes and dirt enters, causing rapid joint failure. If you spot grease splattered over the inside of the wheel rim, prompt action is needed before the complete shaft requires replacement.

How to choose the correct drive shaft

Finding the correct drive shaft for your Opel Meriva B can seem tricky, as several configurations exist depending on engine size, gearbox type (manual or automatic) and model year. Differences can occur in total axle length, the spline count at both ends, and whether specific ABS reluctor rings are fitted to the shaft. To make the process straightforward and reliable, you can easily filter our parts catalogue by vehicle make, model and engine specification.

By selecting your exact vehicle details, our shop displays the components fully compatible with your specific car. This eliminates guesswork and ensures you receive a part engineered for an exact fit. We always advise checking whether you require the left-hand or right-hand side, as drive shafts on the Meriva B are almost invariably different in length between sides. Getting the correct part straight away saves both time and labour during installation.

Related parts to check

We also recommend reviewing these specific pages for the same vehicle when working on the drive shaft:

When a driveline component shows signs of wear, related parts on the car often require attention as well. By comparing these dedicated pages for the Opel Meriva B, it becomes much simpler to diagnose whether the fault lies strictly with the drive shaft or with an adjoining section of the transmission system.

This is particularly valuable on models where vibrations, play and knocking sounds can transfer between multiple drivetrain components. A quick inspection of related categories prevents replacing a component only to find a neighbouring worn part is responsible for the symptom.

Replacing a drive shaft provides an ideal opportunity to inspect other front suspension and steering components that endure similar wear. If the shaft bar itself is undamaged but you experience noise during cornering, fitting a new outer constant velocity joint may be sufficient. Also take the time to inspect the wheel bearings and ball joints, as these are unbolted or accessed during the removal process.

Here are the key categories to explore further for your vehicle:

  • Opel Meriva B - Overview of all driveline components
  • Outer CV joints for Opel Meriva B - For repairing the outer joint
  • All car makes - General drivetrain components
By proactively replacing torn boots and worn oil seals, you can substantially extend the lifespan of your replacement drive shaft and avoid premature workshop repairs.

Why shop at CVJoint24?

CVJoint24 is your trusted partner for All car makes and automotive drivetrain components. As an international Swedish driveline specialist shipping across the EU from our Helsingborg warehouse, we provide deep technical expertise alongside an extensive product range that general motor factors rarely match. We focus dedicatedly on drivetrain components, ensuring top product relevance and reliable guidance for your Opel Meriva B.

Our mission is to supply the right part at the right price backed by prompt, knowledgeable customer service. By choosing your car's make, model and engine, you can be completely confident that the spare parts you order will fit your car accurately without modification. We prioritise your vehicle's reliability and supply only durable, quality-tested parts, making us the natural choice for DIY enthusiasts and independent garages across Europe.

Frequently Asked Questions about Drive Shafts for Opel Meriva B - High Quality & Perfect Fit

How do I know whether the right or left drive shaft has failed on my Meriva B?

Vibrations under acceleration often indicate a worn inner joint, while clicking noises when cornering point to the outer joint. If the noise is clearest when turning left, it is usually the outer joint on the right-hand side that is worn, and vice versa.

Can I replace just the CV joint instead of the entire drive shaft?

Yes, on the Opel Meriva B it is often possible to replace just the outer CV joint if the shaft itself is undamaged. This is a cost-effective solution if the fault is confined solely to the outer joint.

Why does my Opel Meriva B vibrate under acceleration?

This is a classic symptom of a worn inner CV joint. When the joint wears, play develops that causes imbalance under load, transmitting vibrations throughout the entire car.

Are CV boots included when I purchase a complete drive shaft?

Yes, when you buy a complete drive shaft from us, it comes fully assembled with both inner and outer CV joints, as well as protective boots pre-packed with grease.

Is it difficult to replace a drive shaft yourself on a Meriva B?

It requires some mechanical experience and the correct tools, such as a heavy-duty socket for the hub nut and tools to release the ball joint. If you have the right equipment, it is a fully manageable job for a DIY mechanic.

How long does a drive shaft normally last?

A drive shaft can last for the lifetime of the vehicle as long as the CV boots remain intact. However, if a boot tears, the joint can be ruined in just a few weeks due to dirt and moisture.