Drive shafts for Peugeot 106

Looking for a replacement drive shaft for your Peugeot 106? As dedicated driveline specialists, we supply an extensive range of high-quality drive shafts tailored specifically to your...

Products for Drive shafts for Peugeot 106

37 products
1 - 24 of 37
Item no.:2193772
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 798 mm
  • ABS teeth: 48
Item no.:1152302
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 614 mm
  • ABS teeth: 48
Item no.:2171929
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 798 mm
  • Joint diameter: 77 mm
Item no.:1158639
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 625 mm
  • ABS teeth: 48
Item no.:2135447
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 805 mm
  • Joint diameter: 77 mm
Item no.:7314351
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 625 mm
  • Joint diameter: 77 mm
Item no.:1110523
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 618 mm
  • Joint diameter: 77 mm
Item no.:2186853
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 808 mm
  • Joint diameter: 77 mm
Item no.:1173952
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 606 mm
  • ABS teeth: 48
Item no.:7306947
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 805 mm
  • ABS teeth: 48
Item no.:2170924
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 801 mm
  • Joint diameter: 87 mm
Item no.:7306948
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 801 mm
  • ABS teeth: 48
Item no.:1166743
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 620 mm
  • Joint diameter: 86,5 mm
Item no.:1170437
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 620 mm
  • ABS teeth: 48
Item no.:2116381
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 815 mm
  • ABS teeth: 48
Item no.:1120669
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 613 mm
Item no.:1195759
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 606 mm
  • Joint diameter: 77 mm
Item no.:1190087
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 613 mm
  • ABS teeth: 48
Item no.:1105331
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 622 mm
  • Seal ring diameter: 48 mm
Item no.:1157913
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 616 mm
  • Joint diameter: 76,5 mm
Item no.:2117478
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 21
  • Total length: 800 mm
  • Joint diameter: 76,5 mm
Item no.:1199078
  • Position: Front left
Item no.:2191142
  • Position: Front right
Item no.:1117369
  • Position: Front left
  • ABS teeth: 48
Showing 1–24 of 37 products

Drive shafts for Peugeot 106

Finding the right drive shafts for a Peugeot 106 requires precision, as this compact hatchback was produced in numerous configurations throughout its lifespan. The drive shaft transfers engine power directly from the gearbox to the wheels, and on a front-wheel-drive car like the Peugeot 106, these components endure substantial stress during both acceleration and steering. With 25 precisely matched items in our range, we offer reliable solutions for everything from the smallest petrol engines to the hard-working diesel variants. Each drive shaft is engineered to meet or exceed original specifications, ensuring long service life and optimal performance.

Because the Peugeot 106 is frequently used for city driving with frequent starts, stops and tight turns, drivetrain components often wear faster than on vehicles used mainly on motorways. We understand the importance of supplying parts that withstand these demanding conditions. Choosing a model-specific driveshaft from a specialist ensures that your car retains its agile handling and safety. Our focus is on delivering components that fit perfectly without any need for modification, making fitting straightforward for both DIY mechanics and professional garages.

What does a drive shaft do on a Peugeot 106?

The main task of the drive shaft on your Peugeot 106 is to serve as the final link in the powertrain. It receives torque generated by the engine and gearbox and transmits it to the front wheels so the car can move forwards or in reverse. A drive shaft consists of the shaft itself and two constant velocity joints: an inner CV joint connecting to the gearbox and an outer CV joint at the wheel hub. These joints allow the wheels to move up and down with the suspension and turn during steering, all while maintaining smooth and continuous power delivery.

On a lightweight car like the Peugeot 106, drive shafts are engineered to be both light and strong. If a drive shaft fails or wears out, the car will either become completely undriveable or suffer severe handling issues. The inner joint primarily accommodates the axial plunge as the suspension articulates, whilst the outer joint provides the wide articulation angles needed for parking and tight corners. Understanding this mechanism highlights why superior material quality and manufacturing precision are critical to your vehicle's overall reliability.

Common signs of wear

Several distinct symptoms indicate that a drive shaft on your Peugeot 106 is failing. The most common sign is a rhythmic clicking or knocking noise when taking tight turns, such as at junctions or while parking. This sound almost always originates from the outer CV joint and is usually caused by leaked grease or dirt ingress. If you experience vibrations through the steering wheel or car floor during acceleration, the inner CV joint may be worn or out of balance.

Another warning sign is grease splattered across the inside of the wheel rim or wheel arch. This typically indicates a split CV boot, which quickly leads to joint failure if not addressed straight away. If vibrations intensify at higher road speeds or the car feels unstable under load, inspect the driveshafts immediately. Ignoring these warning signs can result in complete shaft failure, leaving you stranded and potentially damaging the surrounding suspension or gearbox casing.

How to choose the correct drive shaft

Selecting the correct drive shaft for your Peugeot 106 can be tricky, as parts vary depending on engine capacity, transmission type (manual or automatic) and whether the vehicle is fitted with ABS brakes. The first step is to filter by your car's exact make, model and engine variant in our shop. However, it remains essential to check key technical dimensions, such as total shaft length and spline tooth counts (both on the gearbox side and the wheel hub side), as these can vary even within the same model year.

Another critical detail is the ABS ring. If your car has an ABS system, the drive shaft must feature an ABS ring with the correct tooth count so the wheel speed sensors function properly. We also recommend confirming whether you require the left-hand or right-hand side, as drive shafts on the Peugeot 106 differ in length due to the offset position of the gearbox. By carefully comparing the technical specifications in our product listings with your original component, you can be confident of receiving a direct-fit replacement.

Related parts to check

We also recommend checking these specific pages for your vehicle when replacing a drive shaft:

When a drivetrain component wears out, adjacent parts on the same vehicle often show signs of wear as well. Checking these exact categories for Peugeot 106 makes it easier to determine whether an issue lies purely with the drive shaft or involves another part of the power transmission.

This is especially true on models where vibrations, play and mechanical noise can travel across several connected driveline components. Inspecting related categories minimises the risk of replacing one part whilst overlooking an adjacent component that contributes to the same issue.

We also recommend checking the gearbox oil level when removing a drive shaft, as transmission fluid frequently drains when the inner joint is pulled from the gearbox. Fitting fresh oil seals and refilling with clean oil is essential for gearbox longevity and smooth operation.

Why buy from CVJoint24?

CVJoint24 is your dedicated Swedish specialist for All car makes in driveline and power transmission components. We maintain a focused, specialist inventory rather than trying to supply everything for every vehicle. This provides us with deep, practical expertise in the exact parts we stock, including drive shafts for Peugeot 106. When shopping with us, you receive high-calibre spare parts alongside the assurance of accurate, reliable technical data.

Our goal is always to deliver the right part first time, saving valuable workshop time for you and your mechanic. Operating from our central Swedish warehouse, our efficient logistics ensure prompt dispatch across the European Union, which is invaluable when your car is waiting on the ramp. As our customer, you benefit from strong stock availability and direct relationships with manufacturers, allowing us to offer competitive pricing without cutting corners on build quality. Choose a dedicated driveline specialist for your Peugeot 106 – choose CVJoint24.

Frequently asked questions about drive shafts for Peugeot 106

How do I know if my Peugeot 106 needs a new drive shaft?

The most common symptoms are clicking noises when making sharp turns, vibrations during acceleration, or visible grease leaks from split CV boots. If the noise increases with speed or under load, it is time to inspect the shaft.

Is there a difference between the right and left drive shaft on a Peugeot 106?

Yes, on a Peugeot 106 the drive shafts are usually different lengths. The offside (right) shaft is generally longer because the gearbox is positioned on the nearside (left) of the engine bay. Always check which side you need before ordering.

Do I need to replace the entire drive shaft if only the CV boot is damaged?

No, if you catch the damage early and the joint is still quiet and clean, replacing the CV boot and repacking it with fresh grease may be sufficient. However, if the joint has started to make knocking or clicking noises, a complete drive shaft replacement is necessary.

Do all drive shafts fit every Peugeot 106 model?

No, there are variations depending on the engine (e.g. 1.1, 1.4 or 1.6), gearbox type and whether the car is fitted with ABS. Always select your vehicle's make, model and engine to find the exact specification for your car.

What is included when I buy a drive shaft from you?

Our drive shafts are supplied as complete assemblies, which means they include both inner and outer CV joints as well as pre-fitted CV boots. They arrive ready to install directly onto your car.

How quickly can I get my new drive shaft delivered?

We offer fast delivery across the EU for our Peugeot 106 matching items, provided they are in stock and ordered in time. We understand that prompt delivery is essential when getting your car back on the road.